• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.847-856
• /
• 2009

In geographic routing for wireless sensor networks, sources need the location of sinks destined for delivering their data packets. Most of the existing geographic routing protocols merely assume that the sources can get the locations of sinks by some location service. How source nodes find out the location of sinks is not easy. In this paper, we propose a sink location dissemination scheme in geographic routing for wireless sensor networks. In this scheme, a source node and a sink node send sink location announcement and query messages along two paths respectively by geographic routing. The node located on the crossing point of the two paths informs the source about the sink location. Then the source can send data packet to the sink by geographic routing. How to guarantee that these two paths have at least one crossing point in any irregular profile of sensor network is the challenge of this paper Simulation results show that our protocol is significantly superior to other protocols in terms of energy consumption and control overhead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.981-987
• /
• 2009

Recently, the study on wireless body area network for providing ubiquitous healthcare services has been actively done, including the standardization of the IEEE and others. Wireless body area network is usually configured in tree format using multi-hop communication mode due to the power limitation and the characteristics of human body. In this case, differently from existing sensor network, the wireless body area network tends to be disconnected due to the frequent movement of human body. The number of connections which can be supported at each node has some limitations due to the constraint imposed on power consumption. In this paper, we have proposed a heuristic algorithm for optimal selection of parent node with guaranteed QoS for a disconnected node, which considers the priority on packet transmission. Simulation has been performed to evaluate the performance of the proposed algorithm.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.238-245
• /
• 2018

This paper proposes the applicability of matrix converter topology for the speed control of direct current motors. Matrix convertesr are divided into direct and indirect components. This paper utilizes an indirect matrix converter which is expected to be used widely because of making a variety of output side. The proposed converter has advantages which improves input current shape, has no large energy storage component causing short life. Simulation results are provided to verify effectiveness by comparing and analyzing features of the proposed and conventional topology. The proposed method shows similar performance for speed control, torque control, and load current control compared to a conventional method. Furthermore Harmonics are greatly reduced because the input current is controlled in a manner similar to sinusoidal wave by directly controlling switches at the rectifier stage.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.548-553
• /
• 2002

We have investigated the output characteristics of a Nd:YAG oscillator with a Stimulated Brillouin Scattering phase conjugation mirror (SBS-PCM). FC-75 is used as an SBS gain medium and Cr:YAG (T=50%) as a Q-switcher. The SBS-PCM consists of an SBS-cell and a simple plano-convex focusing lens system. For the case of not using a Q-switcher, an SBS-cell doesn't work as a phase conjugation mirror. For the case of using a Q-switcher, the energy characteristics remains nearly the same whether using the SBS-cell or not using it. The pulse width is reduced from 50 ns to 40 ns by an SBS-PCM. When the SBS-cell is used with a Q- switcher, the SBS-cell works very well as a phase conjugation mirror and its beam-profile is improved dramatically. And in order to explain the progression of beam-profile, we propose a simple model based on the nonlinear reflectivity of the SBS-PCM, whose reflectivity is dependent on the pumping intensity at the focal plane.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.227-233
• /
• 1992

The simulation code was developed for the development of the split-disk geometry glass amplifier, which could design the laser apparatus and analyze the properties of the laser system. The flashlamp emission energy at the short wavelength region must be reduced, while maintaining a current density between 2000 and 4000 A/$\textrm{cm}^{2}$, in order to reduce the thermal loading in the laser glass and to raise the coupling efficiency between the emission spectrum of the flashlamps and the absorption spectrum of the laser glass. By cutting the laser glass into three equal pieces, the temperature rise in the laser glass dropped by 70% due to the efficient removal of the heat in the laser glass. It was found that the $Nd^{3+}$ doping rate of each laser glass should be properly selected and the optimum value of the product of the absorption coefficient $\alpha$ and the thickness d of the laser glass is about 0.26 in the split-disk geometry.

• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.300-310
• /
• 2008

Through this study, a conceptual design for the next generation high-speed EMU has been derived to meet the crash worthiness requirements of the Korean rollingstock safety regulation. The crashworthiness regulations require some performance requirements for two heavy collision accident scenarios; a train-to-train collision at the relative speed of 36 km/h, and a collision against a standard deformable obstacle of 15 ton at 110km/h. The complete train set will be composed of 2TC-6M with 13 ton axle load, which is different from KTX with the power car of 17 ton axle load. Using theoretical and numerical analyses, a crashworthy conceptual design was derived in terms of mean crush forces and energy absorptions for principal crushable structures and devices. The derived conceptual design was evaluated and improved using one dimensional dynamic simulations for the bar-spring-damper-mass model. It is shown from the simulation results that the suggested conceptual design can easily satisfy domestic crashworthiness requirements.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.66-72
• /
• 2004

PID control has been well used for several decades. For PID algorithms, some tuning methods are used for selecting PID parameters and with these selected parameters, PID control system is designed. But in some cases various kinds of performance indices are used instead of well-known tuning rules, and so variable type of performance index must be tested so that the designed control system meets the some specifications. For 2 DOF PID controller design this paper presents a linear combinational type of performance indices constituting of index for robust performance, which is obtained by h infinity norm of a weighted complementary sensitivity function, including other time domain indices such as error, energy and changing rate of control input. By numerical methods, the optimal 2 DOF PID parameters are obtained. Therefore various types of 2 degree of freedom PID controllers such as I-PD controller are used so that this two degree of freedom PID controllers may give more desirable output characteristics. Simulations are done with MATLAB m file and mdl files.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.96-101
• /
• 2014

Wind power is the fastest growing renewable energy source in the world and it is expected to remain so for some times. Recently, there is a constant need for the reduction of Operational and Maintenance(O&M) costs of Wind Energy Conversion Systems(WECS). The most efficient way of reducing O&M cost would be to utilize CMS(Condition Monitoring System) of WECS. CMS allows for early detection of the deterioration of the wind generator's health, facilitating a proactive action, minimizing downtime, and finally maximizing productivity. There are two types of faults such as mass unbalance and aerodynamic asymmetry which are related to wind turbine's rotor faults. Generally, these faults tend to generate various vibrations. Therefore, in this work a simple fault detection algorithm based on spectrums of vibration signals and simple max-min decision logic is proposed. Furthermore, in order to verify its feasibility, several simulation studies are carried out by using GH-bladed software.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.521-527
• /
• 2020

Quantum-dot cellular automata (QCA) is a technology that attracts attention as a next-generation digital circuit design technology, and several digital circuits have been proposed in the QCA environment. Content-addressable memory (CAM) is a storage device that conducts a search based on information stored therein and provides fast speed in a special process such as network switching. Existing CAM cell circuits proposed in the QCA environment have a disadvantage in that a required area and energy dissipation are large. The CAM cell is composed of a memory unit that stores information and a match unit that determines whether or not the search is successful, and this study proposes an improved QCA CAM cell by designing the memory unit in a multi-layer structure. The proposed circuit uses simulation to verify the operation and compares and analyzes with the existing circuit.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.151-155
• /
• 2016

In this paper, we present the LED dimming control system by using ADPCM (Adaptive Differential Pulse Code Modulation). This ADPCM apparatus accurately controls the LED current with high resolution reducing the RFI (radio frequency interference) due to the spreading out of the harmonics of current of pulses. Additionally, this makes it easier to increase the accuracy of control operation. This study introduces to make a digitally controlled circuit for controlling LED with high-energy efficient by adopting pulse current to LED. The LED current drive system we designed are two systems, the digitally-controlled unit and analog switching mode power supply unit, can be developed separately. The simulation shows the sigma delta modulation of digital to analog converter's output when the input level is 0.7. From this simulation, the output is approached to accurately 0.15% to target value with 510 pulses.