• Journal of the Korean Society of Food Culture
• /
• v.38 no.4
• /
• pp.191-202
• /
• 2023

Food upcycling has emerged as an effective approach to sustainably utilize the food waste generated within the food supply chain. This review article examines upcycled food with respect to its definition, consumers' knowledge and perception on it, and the process by which by-products from the food supply chain are utilized for the creation of upcycled food products. The definition of upcycled food varied among manufacturers, research institutions, and the Upcycled Food Association, depending on the specific values and objectives of each sector. This has resulted in the use of different keywords to highlight the distinctive characteristics of their respective interpretations of upcycled food. This review also summarizes the various consumer traits that can influence the awareness and acceptance of upcycled food, encompassing functional, empirical and emotional, symbolic and self-expressive, and economic benefits. Additionally, the review presents strategies to utilize by-products produced in large quantities in Korea, while also addressing the control of hazardous components to ensure biological or chemical safety and the changes in nutritional value that may occur during the utilization of these byproducts.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.4-4
• /
• 2023

다국적 제약회사에서 생산되는 제약화합물은 인간의 질병치료 뿐만 아니라 가축의 생산성을 향상시키는 물질으로도 활발하게 생산되는데 육우의 성장을 촉진하는 기능성 화합물들도 많이 있다. 북미에서 생산되는 소고기의 약 80%가 1번 이상의 성장촉진기술들이 활용되고 있다고 보고된다. 고기소로 생산되는 비육우에 적용되는 방법은 크게 피하 이식에 의해 혈류를 타고 성장을 촉진하는 17β-Estradiol과 합성 남성호르몬제인 Trenbolone acetate가 주로 활용되고, 비육후기 사료에 섞어서 급여하는 사료첨가제 형태인 β2-adrenergic agonist 같은 형태로 적용하게 된다. 근육을 성장하는 기술의 작용기전은 많은 선행연구에 의해 밝혀져 있는 반면 천연 알칼로이드 성분들의 기전은 밝혀진 것이 많지 않다. 한방제재들에서 많이 발견되는 알칼로이드 성분들은 생리활성 기능들을 가진 것으로 알려져 있지만, 생산, 수거, 가공, 추출 등의 공정에서 많은 비용이 발생하므로 비육우의 사료화 가능성은 아주 희박하다. 따라서 비용을 최소화 할 수 있는 후보재료를 검색중에 감자부산물을 확보하였고 기능성 물질의 추출과 사료첨가제 화 하여 비육우에 급여시험을 실시하였다. α-solanine과 α-chaconine은 감자의 잎, 과일 및 괴경에서 발견되는 글리코알칼로이드 화합물로, 쥐, 토끼, 닭과 같은 다양한 동물 모델에서 중독성을 가진 물질로 보고 되고 있다. 최근 연구에서는 비육우의 성능을 유도하는 데 사용되는 것으로 나타났다. 한우 송아지 3마리의 사태(Semimembranosus)와 등심(Longissimus Dorci)근육에서 추출된 근육위성 세포(BSC)에 다양한 수준의 α-solanine(control, 0.001, 0.01, 0.1, 1, 10μM)으로 처리해본 결과 근육관련 지표인 MHC2X과 β2-AR의 발현이 높게 나타난 것을 확인했다. 사료급여실험에서는 대조군에 비해 급여군의 등심단면적과 도체중이 향상되는 것을 확인하였다. 결과적으로 감자유래 농산부산물은 한우 비육우의 근육의 성장을 증가시키고, 그 작용기전은 β2-수용체에 작용하여 단백질 합성을 촉진시켜 근육을 축적시키는 것으로 확인하였다. 농산부산물을 이용한 기능성 사료개발은 최근 이슈가 되고 있는 축산분야 탄소저감을 개선할 수 있는 기술로 축산의 업사이클링 기술로 활용 가능하다.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.35-48
• /
• 2014

According to the 2013 construction market outlook report, the liquidation of construction companies is expected to continue due to the ongoing residential construction recession. Bankruptcies of construction companies have a greater social impact compared to other industries. However, due to the different nature of the capital structure and debt-to-equity ratio, it is more difficult to forecast construction companies' bankruptcies than that of companies in other industries. The construction industry operates on greater leverage, with high debt-to-equity ratios, and project cash flow focused on the second half. The economic cycle greatly influences construction companies. Therefore, downturns tend to rapidly increase the bankruptcy rates of construction companies. High leverage, coupled with increased bankruptcy rates, could lead to greater burdens on banks providing loans to construction companies. Nevertheless, the bankruptcy prediction model concentrated mainly on financial institutions, with rare construction-specific studies. The bankruptcy prediction model based on corporate finance data has been studied for some time in various ways. However, the model is intended for all companies in general, and it may not be appropriate for forecasting bankruptcies of construction companies, who typically have high liquidity risks. The construction industry is capital-intensive, operates on long timelines with large-scale investment projects, and has comparatively longer payback periods than in other industries. With its unique capital structure, it can be difficult to apply a model used to judge the financial risk of companies in general to those in the construction industry. Diverse studies of bankruptcy forecasting models based on a company's financial statements have been conducted for many years. The subjects of the model, however, were general firms, and the models may not be proper for accurately forecasting companies with disproportionately large liquidity risks, such as construction companies. The construction industry is capital-intensive, requiring significant investments in long-term projects, therefore to realize returns from the investment. The unique capital structure means that the same criteria used for other industries cannot be applied to effectively evaluate financial risk for construction firms. Altman Z-score was first published in 1968, and is commonly used as a bankruptcy forecasting model. It forecasts the likelihood of a company going bankrupt by using a simple formula, classifying the results into three categories, and evaluating the corporate status as dangerous, moderate, or safe. When a company falls into the "dangerous" category, it has a high likelihood of bankruptcy within two years, while those in the "safe" category have a low likelihood of bankruptcy. For companies in the "moderate" category, it is difficult to forecast the risk. Many of the construction firm cases in this study fell in the "moderate" category, which made it difficult to forecast their risk. Along with the development of machine learning using computers, recent studies of corporate bankruptcy forecasting have used this technology. Pattern recognition, a representative application area in machine learning, is applied to forecasting corporate bankruptcy, with patterns analyzed based on a company's financial information, and then judged as to whether the pattern belongs to the bankruptcy risk group or the safe group. The representative machine learning models previously used in bankruptcy forecasting are Artificial Neural Networks, Adaptive Boosting (AdaBoost) and, the Support Vector Machine (SVM). There are also many hybrid studies combining these models. Existing studies using the traditional Z-Score technique or bankruptcy prediction using machine learning focus on companies in non-specific industries. Therefore, the industry-specific characteristics of companies are not considered. In this paper, we confirm that adaptive boosting (AdaBoost) is the most appropriate forecasting model for construction companies by based on company size. We classified construction companies into three groups - large, medium, and small based on the company's capital. We analyzed the predictive ability of AdaBoost for each group of companies. The experimental results showed that AdaBoost has more predictive ability than the other models, especially for the group of large companies with capital of more than 50 billion won.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.14-21
• /
• 2018

The rapid increase in the consumption of products that contain rare metals has highlighted the importance of recycling and recovering resources from these products when they enter the waste stream. Among various metal resources that can be recovered, this study analyzes the waste streams of cobalt and palladium to determine how their waste resource circulation can be improved at each stage of the waste stream. The findings of this study point to improvements and strategies that can be made at individual stages. First, at the discharge/import stage, the implementation of tariff quotas for specific recycled metal resources is suggested to allow the systemic categorization of waste metals as resources. At the collection/discarding stage, a major problem is the instability in the supply of scrap metals, which may be better managed by changing the bidding process for the scrap metals. At the pretreatment stage, possible areas for improvement are uncovered concerning technical areas, such as technological development and improving the efficiency of material recycling, as well as policy-wise, for instance, expanding the regulation for manufacturers to produce products that are designed to facilitate resource recovery, increasing incentive for closed recycling, and refining the guidelines and standards for recycling. At the resource recovery stage, as the waste metal recycling industry consists of businesses that vary in size, policies to promote cooperation and coexistence between large and smaller enterprises will benefit the industry in the long-run. Lastly, at the product production/export stage, a tariff on exporting waste resources that contain cobalt and palladium will help control the amount of waste metals that are shipped abroad.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.22-28
• /
• 2019

Cement is a basic material for the construction industry and it requires high temperature sintering when manufacturing cement. $CO_2$ emissions from raw materials and fuels are recognized as new environmental problems and efforts are underway to reduce them. Techniques for reducing $CO_2$ in concrete are also recommended to use blended cement such as blast furnace slag or fly ash. In addition, the construction waste generated in the dismantling of concrete structures is recognized as another environmental problem. Thus, various methods are being implemented to increase the recycling rate. The purpose of this study is to utilize the inorganic raw materials generated during the dismantling of the structure as a raw material for the low carbon type cement binder. Such as, waste concrete powder, waste cement block, waste clay brick and waste textile as raw materials for low carbon type cement binder. From the research results, low carbon type cement binder was manufactured from the raw material composition of waste concrete powder, waste cement block, waste clay brick and waste textile.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.65-72
• /
• 2020

Black dross is a dark gray dross generated during the aluminum recycling process that uses flux, and contains NaCl, KCl, Al2O3, MgO, etc. Black dross is separated into soluble substances (NaCl, KCl) and insoluble substances (Al2O4, MgO) through the dissolution process. Soluble materials can be reused as salt flux, and Al2O3 and MgO can be upcycled to various ceramic materials through the synthesis process. In this study, Mayenite was synthesized using Al2O3 and MgO recovered from black dross, and the synthesis was performed according to the mixing ratio and reaction temperature. It was confirmed that when Mayenite was synthesized using black dross (spinel) and CaCO3, precursors were changed to Mg0.4Al2.4O4 and CaO at 700 ℃, and to Ca12Al14O33 (Mayenite) after 800 ℃. In the mixing conditions experiment, it was confirmed that the Mayenite XRD peak increased with increase of the CaCO3 content, and the Mg0.4Al2.4O4 XRD peak decreased. As a result of the BET analysis of the synthesized powder, the surface area decreased as the fine particles were grown and agglomerated in the process of generating mayenite.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.107-116
• /
• 2023

In this study, to explore the possibility of using discarded by-products of corn as a wrinkle-improving functional material, the active ingredient contained in each part including kernel, cob, husk, and silk of 10 varieties of chodang and waxy corn was identified and the content was analyzed to suggest the possibility of corn by-products as upcycling materials. As a result of evaluating the collagen synthesis efficacy of extracts by part, the cob in chodang and waxy corns showed significant activity at 100 ㎍/mL concentration of 176.5 and 140.0%, respectively. The LC-MS/MS qualitative analysis resulted in the identification of 18 components in the cob, of which N, N'-diferuloylputrescine (DFP) was selected as an active ingredient, and the quantitative analysis was conducted by variety and part. As a result, DFP was confirmed only in the cob and kernel, and it was most frequently detected in the cob of the Goldsugar of chodang corn (39.6 ㎍/g) and Daehakchal of waxy corn (38.4 ㎍/g). The cob is a by-product left over from grain removal, and is expected to create new added value as a material that promotes collagen synthesis. Through this study, we propose the possibility of using discarded cob as a wrinkle-improving functional material.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.327-327
• /
• 2021

하수재이용에서 전처리 막여과 공정은 완벽한 고액분리로 인해 후단 역삼투막 손상을 줄일 수 있는 공정으로 각광을 받고 있다. 일반적으로 막여과 공정은 여과->물리세정->충진->여과 와 같은 제막사에서 제공하는 운전 사이클에 맞춰 적용하고 있으며 유지세정 역시 1회/일 또는 1회/주 단위로 정해진 범위에서 수행되고 있다. 이러한 운전 방식은 시시각각 변화하는 막 유입수질에 적절하게 대응하지 못해 장기적으로 막오염 발생에 따른 생산수량 감소는 물론 막오염 제거를 위한 화학세정 주기가 짧아져 전체적인 생산수량이 감소하는 원인이 되고 있다. Raffine(2012)에 따르면 가역적 막오염의 경우 Flux 증가에 큰 영향이 없으나 비가역적 막오염은 Flux 증가에 따라 급격히 증가한다고 보고하고 있으며 이는 제한된 분리막 면적당 처리수 생산량을 증가시키기 위해 비가역적 막오염의 발생량을 줄이는 것이 필요하며 이를 위해 주기적인 강화역세(Chemical Enhanced Backwashing, CEB)가 도입되고 효율적인 유지세정 방법에 대한 연구가 진행되고 있다. 당사에서는 일산에 있는 I 수질복원센터내에 25 m³/일 규모의 막여과 하수재이용 파일롯 플랜트를 설치하고 막여과 하수재이용 공정의 운영 효율을 높이기 위하여 W사에서 개발한 IntelliFluxControl(IFCr) 소프트웨어를 이용하여 하수재이용 막여과 성능을 확인 하였다. IFCr은 실시간으로 변화하는 수질에 따른 막오염 정도에 따라 역세 강도 및 빈도와 CEB 적용 정도를 변화시켜 분리막 운전의 효율을 높일 수 있는 운영 소프트웨어이다. I 수질복원센터의 하수 방류수를 막여과 유입수로 적용하여 40 LMH를 기준으로 IFCr을 적용하지 않은 경우 23.7일 운전 가능하였으나 IFCr을 적용한 경우 50일 연속 운전이 가능하였다. 또한 역세척수를 운전 기간 동안 약 50 m³을 사용한 반면 IFCr을 적용한 경우 이에 절반 수준인 24.1 m³ 만 사용하여 회수율이 91%에서 95%로 증가한 것을 확인 할 수 있었다. 본 연구의 결과는 기존의 제막사에서 제시하는 막 공정 운영방법을 탈피하여 분리막이 갖고 있는 성능을 최대한 끌어 올릴 수 있는 연구 결과라고 판단되며 향후 스케일 업 연구를 통해 실제 플랜트에 적용 가능성이 확인 될 경우 시설의 설치 막모듈 개수와 유지관리비를 동시에 절감할 수 있는 기술이 될 수 있을 것이다

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.517-527
• /
• 2023

This study aimed to examine the possibility of upcycling extracts of Angelica keiskei and Oenanthe javanica juice by-products through comparing enzyme extraction (EE) and complex extraction (CE) methods to increase the extraction yield and flavor of materials. A higher extraction yield was obtained for free amino acid content with EE and CE for A. keiskei and O. javanica juice by-products, respectively, and a higher extraction efficiency was achieved with juice by-products than with extracts prepared from raw materials before juice production. The content of major amino acids varied depending on the extraction method used. When used according to the characteristics of the extract, their use as a functional material was confirmed along with improvement in the flavor of the food. Consistently high extraction yields for organic acid and sugar levels were obtained with CE in A. keiskei and O. javanica juice by-products. The DPPH radical scavenging ability and TPC were consistently high with CE in A. keiskei and O. javanica juice by-products; the increase in extracted content was likely because of the reaction between the ethanol used for CE and the phenolic compounds. However, because the antioxidant capacity of the juice by-product extracts was somewhat lower than that of the extracts from raw materials before juice production, the amount used should be reviewed. The TFC was found to be higher in extracts obtained with EE than with CE for A. keiskei juice by-products; however, no significant difference was observed between EE and CE in the O. javanica juice by-products. Through this study, the taste compounds and antioxidant properties of extracts obtained from juice by-products produced after the production of A. keiskei and O. javanica green juice were analyzed, and the availability of high value-added materials was confirmed. Based on these research results, expanding specific R&D for practical use should be explored.