• Korean Architects
• /
• no.6 s.290
• /
• pp.42-49
• /
• 1993

• Korean Architects
• /
• no.6 s.290
• /
• pp.14-37
• /
• 1993

• Journal of the Korean institute of surface engineering
• /
• v.42 no.6
• /
• pp.287-293
• /
• 2009

The passivation films with epoxy layer on LiF, $SiN_x$ and LiF/$SiN_x$ inorganic layer were fabricated on OLED to protect device from the direct damage of $O_2$ and $H_2O$ and to apply for a buffer layer between OLED device and passivation multi-layer with organic/inorganic hybrid structure as to diminish the thermal stress and expansion. Red OLED doped with 1 vol.% Rubrene in $Alq_3$ was used as a basic device. The device structure was multi-layer of ITO(150 nm) / ELM200_HIL(50 nm) / ELM002_HTL(30 nm) / $Alq_3$: 1 vol.% Rubrene(30 nm) / $Alq_3$(30 nm) / LiF(0.7 nm) / Al(100 nm). LiF/epoxy applied as a protective layer didn't contribute to the improvement of life time. While in case of $SiN_x$/epoxy, damage was done in the passivation process because of difference in heat expansion between films which could occur during the formation of epoxy film. Using LiF/$SiN_x$/epoxy improved lifetime significantly without suffering damage in the process of forming films, therefore, the best structure of passivation film with inorganic/epoxy layers was LiF/$SiN_x$/E1.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.282-287
• /
• 1993

The effect of ethanol concentration for extraction of cinnamon on chemical and physical properties of the extracts was investigated. The cinnamon was extracted at $80^{\circ}C$ for 5 hours. High contents of cinnamic acid, aldehyde, eugenol and antioxidant activity were found in the extracts of $60{\sim}90%$ ethanol. Free sugar, tannin, degree of browning and total solids were measured relatively high in 70% ethanol extract while total amino acids and minerals were increased as the ethanol concentration decreased. The overall data suggested 70% ethanol as the most effective solvent for cinnamon extraction.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.3
• /
• pp.111-115
• /
• 2013

To study the encapsulation method for large-area organic light emitting devices (OLEDs), OLED of ITO / 2-TNATA / NPB / $Alq_3$:Rubrene / $Alq_3$ / LiF / Al structure was fabricated, which on $Alq_3$/LiF/Al as protective layer of OLED was deposited to protect the damage of OLED, and subsequently it was encapsulated using attaching film and flat glass. The current density and luminance of encapsulated OLED using attaching film and flat glass has similar characteristics compared with non-encapsulated OLED when thickness of Al as a protective layer was 1200 nm, otherwise power efficiency of encapsulated OLED was better than non-encapsulated OLED. Encapsulation process using attaching film and flat glass did not have any effects on the emission spectrum and the Commission International de L'Eclairage (CIE) coordinate. The lifetime of encapsulated OLED using attaching film and flat glass was 287 hours in 1200 nm Al thickness, which was increased according to thickness of Al protective layer, and was improved 54% compared with 186 hours in same Al thickness, lifetime of encapsulated OLED using epoxy and flat glass. As a result, it showed the improved efficiency and the long lifetime, because the encapsulation method using attaching film and flat glass could minimize the impact on OLED caused through UV hardening process in case of glass encapsulation using epoxy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.287-296
• /
• 2015

Recent navigation systems provide quick guide services, based on processing real-time traffic information and past traffic information by applying predictable pattern for traffic information. However, the current pattern for traffic information predicts traffic information by processing past information that it presents an inaccuracy problem in particular circumstances(accidents and weather). So, this study presented a more precise predictive traffic information system than historical traffic data first by analyzing route search data which the drivers ask in real time for the quickest way then by grasping traffic congestion levels of the route in which future drivers are supposed to locate. First results of this study, the congested route from Yang Jae to Mapo, the analysis result shows that the accuracy of the weighted value of speed of existing commonly congested road registered an error rate of 3km/h to 18km/h, however, after applying the real predictive traffic information of this study the error rate registered only 1km/h to 5km/h. Second, in terms of quality of route as compared to the existing route which allowed for an earlier arrival to the destination up to a maximum of 9 minutes and an average of up to 3 minutes that the reliability of predictable results has been secured. Third, new method allows for the prediction of congested levels and deduces results of route searches that avoid possibly congested routes and to reflect accurate real-time data in comparison with existing route searches. Therefore, this study enabled not only the predictable gathering of information regarding traffic density through route searches, but it also made real-time quick route searches based on this mechanism that convinced that this new method will contribute to diffusing future traffic flow.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.3
• /
• pp.279-287
• /
• 2012

A double split tee connection is used as a connection that is suitable for ordinary moment frames or special moment frames according to the combination of variables of the thickness of the T-stub flange and the gauge distance of the high-strength bolts. In order to demonstrate safe structural behavior, a double split tee connection must meet the requirements for inter-story drift angles and the moment of connection, as defined in the Korea Building Code-Structural. In order to determine whether the these requirements are met, it is necessary to predict rotational stiffness and the ultimate plastic moment of the connection. Therefore, this study primarily aimed to propose an analytical model for predicting the rotational stiffness of a double split tee connection under a static load. Toward this end, a three-dimensional, non-linear finite element analysis was carried out. Then, the applicability of the proposed model was verified after comparing the test results of this study with other studies.

• Journal of Veterinary Clinics
• /
• v.32 no.3
• /
• pp.285-287
• /
• 2015

Wolf teeth have been reported with incidence rate of 13% to 31.9% in horses of both sexes. However, there is no report about the incidence of wolf teeth in pony breeds. In order to determine the incidence of wolf teeth in Jeju Ponies and Jeju Pony crossbreds, oral examination and palpation of the interdental space of ponies at the Jeju Race Park were performed from 2006 to 2010. Results of this study showed that a total of 90 (3.4%) of the 2,675 examined Jeju Ponies and Jeju Pony crossbreds had wolf teeth. Among 30 Jeju Ponies that had wolf teeth, 22 were male (73.3%) and 8 were female (26.7%). Among 60 Jeju Pony crossbreds that had wolf teeth, 25 were male (41.7%) and 35 were female (58.3%). In Jeju Ponies, wolf teeth were most common in 3-years-old, followed by ${\geq}4$-years-old, then 2-years-old. For Jeju Pony crossbreds, wolf teeth were most common in 3-years-old, followed by 2-yearsold, then ${\geq}4$-years-old. In conclusion, the incidence of wolf teeth in Jeju Ponies and Jeju Pony crossbreds was considerably lower than what has been reported for horses in other countries.

• Korean Journal of Food Science and Technology
• /
• v.18 no.4
• /
• pp.283-287
• /
• 1986

E.O. and gamma irradiation treatment on the sterilization of ground samples of 5 different types of spices(red and black pepper, onion, garlic and ginger) were investigated. Populations of mesophilic bacteria, mesophilic spores, acid tolerant bacteria and fungi in various samples were $10^4-10^6/g,\;10^3-10^5/g,\;10^3-10^5/g\;and\;10^3-10^4/g$, respectively. Coliforms and osmophilic molds were found only in red and black pepper as $10^3-10^4/g$. A radiation dose of 5 to 7 kGy proved sufficient to redure the viable cell count of the total bacteria and fungi to the level of $10^3/g$ and they were sterilized completely by radiation dose of 10 kGy or more. Coliforms, mesophilic spores and acid tolerant bacteria were sterilized at 5,7 and 10 kGy, respectively. In the mean time $D_{10}$ values of each spices ranged from 1.38 to 2.88 kGy. Comparison of E.O. and gamma irradiation treatment showed that E.O. treatment was less effective than radiation in controlling microbial contamination in spices.