• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.453-459
• /
• 2000

FED has deserved an intensive attentioD as a new flat panel display. The present investigationaims at undemtanding the photoluminescence and cathodoluminescent properties of hGaO$_3$: $Eu^{3+}$ phosphor bytaking into account the possibility that this phosphor could be applied for FED. In onler to investigate on.sucha detailed behavior; 8everM experimental skil18 Je conducted to the LaGaO$_3$:$Eu^{3+}$ phosphoL The excimtion srectrum artd emission spectmn were rnezsured in the UV range and then decay curve of $^5D_0$+$^7F_j$transitions\vas examined. The decay behavior of $^5D_0$ emission was anMyzed by a newly Iuoposed cross-relaxation mech-ani8In in asswiation with inteFwnter di1ffision (or migration). The cross-mlaxation from $^5D_0$ to CTB (Cha'geTransfer Band) wuld be a quite retsonable by considering the excitation spectrum. It could be also found thatthe quenching type was changed from ditfrsion controlled process to the direct quenching process -s inJeasing $Eu^{3+}$ oncntration.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.736-743
• /
• 2013

Novel carbazole based copolymers were synthesized by Suzuki coupling polymerization. (Diphenylene)vinylene and n-octyl was introduced to carbazole as pendants for reducing band gap and improving solubility, respectively. Thermal, photoluminescence and electro-luminescence of copolymers were studied for applying the emitting layer of polymer light emitting diode (PLED). Maximum UV-vis absorption and photoluminescence (PL) emission wavelength of copolymers showed 333~340 nm and 409~464 nm in solution state, respectively. The relative quantum yield using 9,10-diphenylanthracene as a reference was 25.8%. These copolymers exhibited high thermal stability ($T_d$ = $350^{\circ}C$) and good film forming ability. Good luminance was obtained at voltages lower than 8 V and the onset voltage was observed at 4.0 V.

• Nuclear Engineering and Technology
• /
• v.4 no.2
• /
• pp.116-131
• /
• 1972

A fast neutron time-of-flight spectrometer has been constructed with suitable choice of target thickness and proton bombarding energy in Li$^{7}$ (p, n) Be$^{7}$ nuclear reaction for a continuous keV spectrum of neutrons at 0 degree in 1-nsec pulse from a Van do Graaff and a time-pick-up fast neutron detector assembled with a 5 mm-thick 92% enriched B$^{10}$ slab and four heavily shielded 4＂$\times$3＂ NaI scintillation detectors. Energy resolution of this spectrometer is better than 0.3% at 50 keV and the signal-to-background ratio is also improved. Total cross section measurements of several separated single isotopes have been carried out with this spectrometer and analyzed by Rmaxtrix multi-level computer code. The spin values and resonance parameters of each individual resonances are given.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.677-682
• /
• 2009

ZnS:Mn/ZnS core-shell quantum dots (QDs), were synthesized via a thermal decomposition reaction of organometallic precursors in a hot solvent mixture. The synthetic conditions of the quantum dots were monitored at various reaction temperatures for the core formation, while the shell formation temperature was fixed at 135$^{\circ}C$. The obtained colloidal nanocrystals at corresponding temperatures were characterized by UV-Vis, solution photoluminescence (PL) spectroscopies, and further obtained powders were characterized by XRD, HR-TEM, and EDXS analyses. The synthetic temperature condition to obtain the best PL emission intensity for the core-shell QD was 135$^{\circ}C$, for both core and shell formation. At this temperature, solution PL spectrum showed a narrow emission peak at 583 nm with a relative PL quantum efficiency of 42.15%. In addition, the measured spherical particle sizes for the ZnS:Mn/ZnS nanocrystals via HR-TEM were in the range of 4.0 to 5.4 nm, while ellipsoidal particles were obtained at 150$^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.725-729
• /
• 2015

Organic light emitting diodes (OLEDs) are regarded as the next generation display and solid-state lighting due to their superb achievements from extensive research efforts on improving the efficiency and stability of OLEDs in addition to developing new materials. Herein, efficient green phosphorescent OLEDs were obtained by using hexaazatrinaphthylene (HAT) derivatives as a hole injection layer. External quantum and current efficiencies of OLEDs were enhanced from 8.8% and 30.8 cd/A to 13.6% and 47.7 cd/A, respectively by inserting a thin layer of HAT derivatives between the ITO and hole transporting layer. The enhancement of OLEDs was found to be originated from the inserted HAT derivatives, which resulted in the optimized hole-electron balance inside the emission layer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.73-77
• /
• 2020

In this study, phosphor ceramics were fabricated, and optical properties were analyzed for application to nextgeneration automotive laser headlamps by using a spherical YAG : Ce phosphor with a garnet structure synthesized based on the spray drying method. The thickness of phosphor ceramic using spherical YAG : Ce phosphor was obtained with 100 ㎛, 150 ㎛, and 200 ㎛ to investigate the effect of thickness on optical properties such as light conversion efficiency, heat dissipation, luminance and color temperature. The results of this study are expected to play a significant role in the manufacturing process for the fabrication of phosphor ceramic by solving issues such as the high cost and low yield in the conventional liquid method to manufacture YAG : Ce nano fluorescent materials.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2024

Organic light emitting diode(OLED) is distributed in layers with different refractive index, which leads to total internal reflection and low light extraction efficiency. As a result, light extraction technologies have been investigated that include structures such as MLA. However, technologies such as MLA are using petroleum-based polymers, which cause environmental problems during disposal. Therefore, this study investigates the use of eco-friendly polymers hydroxyethyl cellulose(HEC) and tannic acid(TA) to produce external light extraction films. HEC is biodegradable and has high transparency, making it suitable for eco-friend external light extraction films. The TA used as an additive is a polyphenolic molecule, which is expected to form strong hydrogen bonds with HEC. In addition, TA can protect OLED from damage by UV light through its phenolic groups. HECTA MLA films were produced by dissolving HEC and TA in water without using additional solvents and then imprinting them on MLA mould. When the HECTA MLA film was attached to the outside of the OLED and analysed, it showed a high Haze of more than 80%, and the external quantum efficiency and current efficiency of the OLED were improved by 38% and 39%, respectively, compared to the reference.