• Korean Journal of Cognitive Science
• /
• v.7 no.1
• /
• pp.37-56
• /
• 1996

In this paper,we design a verifier for unconstrained handwritten numerals using structural feature analysis,and use it as a comnination algorithm for multiple recognizers.The existing combination algorithms mainly use learnings,statistical methods,or probabilistic methods without considering structural features of numerals.That is why they cannot recognize some numerals which human can identify clearly.To overcome the shortcomings,we design one-to-one verifiers which compare and analyze the relative structural features between frequently confused numeral pairs,and apply them to combine multiple recongnizers.Structural features for verification consist of contour,direction al chain code,polygonal approximation,and zero crossing number of horizontal/vertical projections. We gained a 97.95% reliability with CENPARMI numeral data,and showed that some misconceived factors generated from typical combination algorithms can be removed.

• Resources Recycling
• /
• v.23 no.4
• /
• pp.37-46
• /
• 2014

Carbon dioxide generated from construction materials and construction material industry among the fields of construction is approximately 67 million tons. It is about 30% of the carbon dioxide generated in the fields of construction. In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumed and decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in construction material industry. Therefore, this study manufactured mortar by having cement as the Plain and substituting three binding materials up to 50% and then adopted different curing methods to analyze congelation and strength characteristics. Test results for strength property by changing binding materials showed that specimens with blast furnace slag, CSA 15% and CAMC 5% resulted in positive effect for strength.

• Journal of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.327-332
• /
• 1986

Spatial (radial and height) distribution of electron number density is measured for an inductively coupled plasma under five operating conditions: (1) no carrier gas, (2) carrier gas without aerosel, (3) carrier gas with aerosol, (4) carrier gas with desolvated aerosol, and (5) carrier gas with aerosol and excess lithium. A complete RF power mapping of electron density is obtained. The plasma electrons for a typical analytical torch are observed to be hollow at the radial center in the region close to the induction coil, but diffuse rapidly toward the center in the higher region of the plasma. The presence of excess Li makes no significant change in the electron density profiles. The increases in the RF power levels increase the values of electron density uniformly across the radial coordinate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.425-433
• /
• 1994

The conventional weakly-coupled tap-off for CATV and/or MATV transmitting circuits has been fabricated empirically and experimentally. So, the theoretical analysis or the design method of the conventional one has not been established, the characteristics of which were not good. To solve these problems, we have proposed a modified weakly-coupled freedom in design. This paper describes the design theories and analysis method of the theoretical frequency characteristics of a Modified Weakly-coupled Tap-off with high density of coupling intervals for CATV and/or MATV system. From the theoretical analysis it has been shown that the frequency characteristics of the tap-off proposed here are improved much in comparision with the conventional one. Furthermore, the practical measurements of frequency characteristics for the fabricated circuits show agreement with the theoretical results, and hence, the validity of proposed design and analysis methods has been confirmed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1004-1010
• /
• 2003

In this paper, the 1/4 wavelength backward-wave directional coupler using coupled lines with finite metallization thickness is described. A mode-matching method, simple and fast approach to the quasi-static analysis, has been used to analyse this structure. The numerical results show that it is possible to overcome the disadvantages of weakly coupling, low directivity, and narrow strip distance non-realizable in the case of 1/4 wavelength backward-wave directional coupler with zero thickness conductor. It is also revealed that thicker metallization causes longer coupler length in the case of backward-wave symmetrical parallel coupled line directional coupler. The finite metallization thickness can be a new parameter for tight coupling in the design of backward-wave directional couplers, which enables us to design more accurate properties of monolithic microwave integrated circuits.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.93-99
• /
• 1998

A novel four-channel narrowband wavelength demultiplexer using integrated four vertical directional coupler structures is proposed and theoretically investigated. Four ridge waveguide with different ridge width are vertically coupled to a strip-loaded waveguide which results four different wavelengths filtered out to each ridge waveguide. In order to reduce the side-lobes, the coupling coefficients are varied along the propagation direction. The spectral responses of channels were found to be quite uniform. An average channel spacing of 7 nm with power coupling efficiency of ~90%, 3-dB passband width of 2 nm, and 20 dB side-lobe suppression ratio was achieved.

• Microbiology and Biotechnology Letters
• /
• v.20 no.3
• /
• pp.257-262
• /
• 1992

Virginiae butanolide (VB) is an autoregulator which triggers virginiamycin production in Strefltomyces virginiae. VB-C binding protein activity was investigated under various additives. The VB-C binding protein was almost fully observed in sotubte fraction (>90%) and the binding activity was optimum at pH 7.0. The VB-C binding activity was increased about 15% in 0.5 M KCI, whereas decreased about 60% in 20 mM $Mo^{6+}$. Chelating reagents (ethylenediarnine tetraacetic acid, ethyleneglycol bis(2-aminoethylether) tetraacetic acid, 8-hydroxyquinoline) and SH protecting reagents (rnercaptoethanol, dithiothreitol, thioglycerol) inhibited the VB-C binding activity about 30~55% and 3~20%, respectively. Serine protease inhibitor (phenyl methane sulfonyl fluoride), nucleotides (guanosine 5'-monophosphate, adenosine 3',5'-cyclic monophosphate), and phosphatases (alkaline, acid phosphatase) increased the VB-C binding activity about 17%, 6~20%, and 4- 13%, respectively.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.245-249
• /
• 1997

An electro-optic polymer digital optical switch with a coupling region modified for optimum coupling is designed and demonstrated. Its branch waveguide is fabricated by reactive ion etching. Then, the modified coupling region is adiabatically introduced along the propagation direction from the branching point of the two waveguides, and it is implemented by photobleaching after the device fabrication. The structure of the modified coupling region and its refractive index profiles are designed to optimize and mode coupling in the Y-branch waveguide. Therefore, the switching performance of the device was shown to be enhanced with a fixed device length. The measured drive voltage is reduced by more than 30 percents, and the crosstalk is also improved by about 4~6 dB.

• Journal of Internet Computing and Services
• /
• v.8 no.1
• /
• pp.47-55
• /
• 2007

In this paper, we propose and observe a system that adopts Common-MCS (Modulation and Coding Scheme) level over all layer and Independent-MCS level for each layer in the combined AMC-V-BLAST (Adaptive Modulation and Coding-Vertical-Bell-lab Layered Space-Time) system. Also, comparing with the combined system using Common-MCS level, we observe throughput performance improvement in case of Independent-MCS level. As a result of simulation, Independent-MCS level case adapts modulation and coding scheme for maximum throughput to each channel condition in separate layer, resulting in improved throughput compared to Common-MCS level case. Especially, the results show that the combined AMC-V-BLAST system with Independent-MCS level achieves a gain of 700kbps in $7{\sim}9dB$ SNR (Signal-to-Noise Ratio) range against using Common-MCS level. In addition, the combined AMC-V-BLAST system using MMSEnulling method with receive diversity is verified that the difference of throughput between Independent MCS level system and common MCS level system in $7dB{\sim}9dB$ SNR is about 350kbps more or less.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.59-65
• /
• 2016

This study examined the compressive strength development and pH values of alpha-calcium sulfate hemihydrate(${\alpha}-CH$)-based binders developed for vegetation concrete with neutral pH between 6~7. Considering cost down and strength enhancement of the prepared binders, the ${\alpha}-CH$ was partially replaced by ground granulated blast furnace slag(GGBS), fly ash(FA), or ordinary Portland cement(OPC) by 25% and 50%. The compressive strength of mortars using 100% ${\alpha}-CH$ was 50% lower than that of 100% OPC mortars. With the increase of the replacement level of GGBS or FA, the compressive strength of ${\alpha}-CH$-based mortars tended to decrease, whereas the pH values were maintained to be 6.5~7.5. The main hydration products of ${\alpha}-CH$-based binders with GGBS or FA were a gypsum($CaSO_4$), whereas portlandite($Ca(OH)_2$) was not observed in such binders. Meanwhile, the pH values of ${\alpha}-CH$-based binders with OPC exceeded 11.5 due to the formation of $Ca(OH)_2$ phase as a hydration product. From the thermogravimetric analysis, the amount of $Ca(OH)_2$ in ${\alpha}-CH$-based binders with OPC was evaluated to be approximately 10% of the cement content.