• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.5
• /
• pp.251-258
• /
• 2002

In this paper, the dipole-fed planar array antenna applied Yagi-Uda antenna away theory to microstrip antenna is designed and fabricated at X-band. The design procedure of the dipole-fed planar array antenna with the wide bandwidth is presented to be easily practiced to a wireless communication system. The radiation pattern, return loss and bandwidth of the antenna are improved by the finite differential time domain(FDTD) numerical method. The propriety of analysis of planar dipole antenna is proved from the measured data. From the measured results, the antenna maximum gain is 4.9dBi at center frequency of 10GHz and frequency bandwidth is about 40%. Front-to-back ratio is 16dB, and half-power beam-width of E-plane and H-plane are 117$^{\circ}$and 156$^{\circ}$, respectively. When VSWR of antenna is less than 2, the measured results are agreed well with the theoretical values in the frequency range from 7.4GHz to 11.88GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1908-1914
• /
• 2013

In this paper, we introduce a design method for a broadband planar quasi-Yagi antenna (QYA) for terrestrial digital television (DTV) reception. The coplanar strip line which feeds the driver dipole is connected to a microstrip line and is terminated by short circuit. By appending a wide strip-type rectangular director at a location close to the driver dipole, broadband impedance matching and gain enhancement in a high frequency region are obtained. The gain characteristics in a low frequency region are improved by adding a reflector formed by a truncated ground plane. To reduce the antenna size, the strip-type dipole and reflector are modified to half bow-tie (V)-shaped elements. The effects of various parameters on the antenna characteristics are examined. An antenna, as a design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV. The optimized antenna is fabricated on an FR4 substrate and the experimental results show that the antenna has a good performance such as a frequency band of 450-848 MHz for a VSWR < 2, gain > 4.1 dBi, and front-to-back ratio > 10.4 dB.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.45-52
• /
• 2009

In this paper, a new rectenna is presented for the wireless transmission of microwave power using dipole antenna (Quasi Yagi effect) and rectifier of CPS resonator structure. The dipole antenna with CPW feedline has high peak gain than a general dipole antenna. A ground plane of CPW is used to reflect a dipole as a Yagi antenna. Therefore, the new rectenna receives the RF power better than the one using general dipole. A RF-to-DC conversion efficiency of 61 % using a 1.4 $k{\Omega}$ load resistor is obtained at 5.8 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.10
• /
• pp.921-928
• /
• 2012

In this paper, we propose a novel interference alignment transceiver for multi-cell MIMO downlink channels with arbitrary number of cells and users per cell. We design the receive beamformer to align the interference from undesired base stations to the effective inter-cell interference (ICI) channels. Subsequently, we design the transmit precoder which can nulllify the interference from the corresponding base station. The proposed transceiver design can attain the degrees of freedom (DOF) equal to the number of streams per user. Accordingly, we investigate conditions for the antenna configuration. From numerical results, we confirm that the proposed transceiver design can achieve higher DOF than the conventional scheme under equal antenna configuration.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.862-867
• /
• 2009

This paper presents a study on a rectenna for rectification of incident low power microwave signals with power densities less than 2 mW/$cm^2$ at 2.45 GHz. The proposed rectenna is designed and implemented by a rectifier with voltage doubler structure and a printed Yagi antenna which suppress re-radiation of the second order harmonic of fundamental frequency. The printed Yagi antenna has a gain of about 5 dB, and the measured conversion efficiencies of the rectenna are from 32 % to 42 % when its incident power levels are from 0 dBm to 14 dBm. The developed rectenna is expected to be useful in the power transmission system.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.58-64
• /
• 2016

This paper proposes the efficient transmit antenna selection (TAS) scheme considering trade-off between the performance and the complexity in massive MIMO system. The massive MIMO system is a core technology to achieve performance objectives for 5 generation wireless communication. It achieve high spectral efficiency, a reliability, and a diversity gain. However many RF chains required by massive transmit antennas equipped in a base station create the problem such as high hardware cost and complexity. Therefor we investigates the transmit antenna selection scheme, in which the number of RF chains of BS is reduced, and the trade-off between the performance and the complexity is considered for proposed scheme. And, the spectral efficiency and complexity are analysed by transmit antenna selection schemes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.705-712
• /
• 2001

In this paper, a new type of aperture coupled microstrip patch antenna with tilted-beam based on the principal of the dipole yagi antenna is proposed and investigated experimentally. Its configuration is composed by 3 types of patches; reflector, driver, and director. Tilted beam patterns are effected by many parameters as those of dipole yagi antenna; sizes of the patches, gaps between the patches, characteristics of the substrates, feeding method and etc. Therefore, in this paper, the effects of varying design parameters of this antenna are studied with a goal of enhancing the gain and tilting the beams. A microtrip patch antenna with tilted beam based on performance trade-offs is designed and fabricated. Measured and simulated results for return loss and radiation patterns are presented. It has 45$^{\circ}$ tilted beam and very close to simulation beam pattern at resonant frequency, 2.58 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.979-986
• /
• 2013

In this paper, a TVS diode which is commonly used as a ESD protector in wireless communication devices could cause antenna wireless sensitivity to decrease has been analyzed. When a smartphone doesn't have enough space to place many components, there would be its speaker near antenna area. In order to protect ESD coming through the speaker there also could be a TVS within antenna GND area. Digital audio signal which was sent to speaker and CDMA RF communication signal coupled from antenna was mixed by TVS. And this leakage current running through TVS resulted in decrease of antenna wireless sensitivity. The results of various experiments can be explained using circuit simulation. Following works will give us some insights that can reduce unwanted summation of digital and RF signal due to nonlinearity of ESD protectors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.473-476
• /
• 2018

Herein, a $2{\times}2$ subarray antenna is designed to implement a VHF band active electronically scanned array. The Yagi-Uda antenna is used as a radiating element. The bandwidth enhancement and miniaturization of the Yagi-Uda antenna are achieved by optimizing the diameter of a driven element and the length of a director. In addition, the grid reflector is utilized to improve the front-to-back ratio(FBR) and to reduce both the wind resistance and overall system weight. The fabricated $2{\times}2$ subarray antenna fully covers the VHF target band($0.98{\sim}1.02f_c$). The measured maximum gain is 10.61 dBi and the FBR is larger than 26 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1095-1103
• /
• 1999

Presently, the retractable phone with a whip antenna composed of a helix and a monopole is most widely used for cellular mobile communications. However, since the length of the monopole is usually about λ/4, the strong radiated electric fields are produced in the region where the auricle of a head is contacted directly. This field distribution results in high specific absorption rates(SAR's) in the head. In this paper, SAR distributions and local SAR values for the inversely shaped phone(ISP) whose antenna arrangement is opposite to the original retractable phone(ORP) are compared with those for the ORP. This phone is accomplished by mounting the $\lambda$/4-whip antenna on the bottom, not on the top of the handset. The time-averaged field distribution in a computational space including a human model and a phone model is computed using the finite-difference time-domain(FDTD) method. SAR distributions and local SAR values for these phones are calculated with the field distributions. An anatomical head model and an approximate hand model were used to consider a real situation. From the analyzed data, it is shown that this arrangement of the antenna considerably reduces the spatial peak SAR in a human head.