• Journal of Aerospace System Engineering
• /
• v.12 no.2
• /
• pp.15-22
• /
• 2018

A compressible multiphase flow was investigated using a DIM consisting of seven equations, including the fifth-order MLP and a modified HLLC Riemann solver to achieve a precise interface structure of liquid and gas. The numerical methods were verified by comparing the flow structures of the high-pressure water and low-pressure air in the shock tube. A 2D air-helium shock-bubble interaction at the incident shock wave condition (Mach number 1.22) was numerically solved and verified using the experimental results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.25-31
• /
• 2004

This paper describes a new vibration-suppression technique for flexible cantilevered structures by using a pipe containing an internal flow. The stability and dynamic response are analyzed based on the finite element method. The flutter limit and optimum stabilizing fluid velocity are determined in root locus diagrams. The impulse responses of the system are studied by the mode superposition method to observe the damping rate of the motion. The stabilizing effect of an internal flow is demonstrated by impulse responses of the structures with and without an material damping. It is found that the response of the pipe with flow of liquid has a larger effect of, stabilizing than that with flow of gas.

• Journal of Energy Engineering
• /
• v.24 no.1
• /
• pp.114-122
• /
• 2015

In the high convective gas flow condition, irregular shaped water waves from which droplet entrainment occurs are generated under horizontally stratified two-phase flow condition. KAERI proposed a new mechanistic droplet entrainment model based on the momentum balance equation consisting of the shear stress, surface tension, and gravity forces. However, this model requires correlation or experimental data of several physical parameters related to the wave characteristics. In the present study, we tried to measure the physical parameters such as wave slope, wave hypotenuse length, wave velocity, wave frequency, and wavelength experimentally. For this, an experiment was conducted in the horizontal rectangular channel of which width, height, and length are, respectively, 40 mm, 50 mm, and 4.2 m. In the present test, the working fluids are chosen as air and water. The PIV technique was applied not only to obtain images for phase interface waves but also to measure the velocity field of the water flow. Additionally, we developed the parallel wire conductance probe for the confirmation of wave height from PIV image. Finally, we measured the physical parameters to be used in the validation of new droplet entrainment model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.383.2-383.2
• /
• 2016

임계 열유속 현상은 열전달 시스템에서 가열조건이나 유동조건이 변함에 따라 열전달 표면 부근의 유체상태가 액체에서 기체로 바뀌면서 열전달계수가 급격히 감소하는 현상을 말한다. 임계 열유속 발생 시 핵 비등 영역에서 순간적으로 막 비등 영역으로 넘어가면서 원전 시스템의 물리적 파괴를 일으킬 수 있게 된다. 따라서 임계 열유속 현상은 시스템 설계 및 안전해석 뿐만 아니라, 열교환 및 냉각 장치 설계에서 중요하게 고려되고 있다. 특히, 비등 열전달 시스템에서 임계 열유속 발생 시 시스템의 물리적 손상을 야기하게 된다. 따라서 원전 시스템을 보호하면서 성능을 극대화시키기 위해서는 임계 열유속 향상이 필수적이며, 임계 열유속 향상을 위한 대안 중 하나로서 열적 특성이 우수한 나노유체를 열전달 시스템에 적용하여 임계 열유속 향상을 위한 연구가 지속되고 있다. 따라서 본 연구에서는 산화 처리된 다중벽 탄소나노튜브 나노유체를 사용하여 각각 0.5 m/s, 1.0 m/s, 1.5 m/s의 유속에서 임계 열유속과 열전달 계수를 측정하였다. 그 결과 산화 처리된 다중벽 탄소나노튜브 나노유체의 유속이 증가 할수록 임계 열유속이 증가하는 것을 확인 하였으며, 순수물과 비교하여 최대 62.64% 증가함을 확인하였다. 그리고 산화 처리된 다중벽 탄소나노튜브 나노유체의 비등 열전달 계수 또한 유속이 증가 할수록 비등 열전달 계수가 증가하는 것을 확인하였며 최대 24.29% 증가함을 확인하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.1-9
• /
• 2012

The gas jet from a coaxial porous injector for two-phase flows is discharged from the porous surface, which encloses the center liquid jet, and the gas and liquid jet interact with each other physically. The wall injected gas jet transfers the radial momentum effectively while the radial gas jet develops to axial jet, and the performance of atomizing and mixing can be improved. In this study, the Weber number and the ratio of momentum flux were controlled by changing the gas injection area and the mass flow rate of the gas jet, and a study on the spray characteristics at the cold-flow test using water and air simulant was performed. It is concluded that the radial momentum transfer concept of a coaxial porous injector gives a positive effect on the atomization and mixing of the two-phase spray.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.377-385
• /
• 2013

To identify the effects of an outflow area on pool boiling heat transfer in a vertical annulus, three different flow restrictors were studied experimentally. For the test, a heated tube of smooth stainless steel and water at atmospheric pressure were used. Both annuli with open and closed bottoms were considered. To validate the effects of the outflow area on the heat transfer, the results of the annulus with the restrictor were compared with the data for the plain annulus without the restrictor. The reduction of the outflow area ultimately results in a decrease in the heat transfer. As the outflow area is very small, a slight increase in heat transfer is also observed. The major cause of this tendency is explained as the difference in the intensity of liquid agitation cause by the movement of coalesced bubbles. It is identified that the convective flow, pulsating flow, and evaporative mechanism are considered as the important mechanisms.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.18-24
• /
• 2000

A two-dimensional numerical method for inviscid two-fluid flows with a significant entrainment into both directions is established, and the oil leakage from a non-pressurized underwater pipe is studied. The interface between two fluids is modeled at a vortex sheet. The flow field and the subsequent interface evolution are solved by using the vortex-in-cell method. For longer flow simulation with a realistic two fluids interaction, an efficient merging scheme is introduced. In the Boussinesq limit, the speed of the external fluid intrusion into the pipe is very close to the existing mathematical models, and the lock exchange is observed in spite of a significant roll-up of the interface and entrainments. It is believed that the developed method can be utilized effectively for further detailed studies on various two-fluid flows which are encountered in many different marine oil spill problems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1087-1093
• /
• 2008

Regenerative cooling passage to guarantee the thermal survivability in high performance rocket engine combustors could have complex configurations of the branching/merging of channels and flow turning, etc. By applying the classical hydraulic coefficients which can be found in the literature according to the flow conditions, hydraulic characteristics in regenerative cooling passages can be obtained effectively through dividing the pressure loss into friction loss and local resistance loss. Satisfactory agreement has been obtained by comparing the present results with experimental measurement of water flow test. In addition, the present results were in good agreement with CFD results when the actual coolant, kerosene was used. Therefore, the application of the present method is expected to be useful to design regeneratively cooled combustors.

• Solar Energy
• /
• v.15 no.3
• /
• pp.15-27
• /
• 1995

This study presents experimental and numerical results of the temperature characteristics, the heat transfer phenomema, and the heat storage quantity during the heat storage process with sodium phyrophosphate decahydrate($Na_4P_2O_7{\cdot}10H_2O$)-Phase Change Material(PCM) in a latent heat storage tank(cubic type). It was proved that heat transfer by conduction was dominant because PCM($Na_4P_2O_7{\cdot}10H_2O$) during heating processes was gel phase, not liquid phase The gap ratio(rate of air content) of PCM became smaller, the thermal capacity of PCM became larger, therefore the temperature distribution of PCM slowly increased than that of large gap ratio. There was maximum 15% difference between measured temperatures and calculated temperatures.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.238-240
• /
• 2001

초전도 응용 기기의 실용화를 위해서는 극저온 냉매의 절연기술이 확립되어야 한다. 특히, 취급이 용이하고 경제성이 높은 액체 질소를 냉매로 사용하는 고온 초전도 응용 기기 개발이 활발히 이루어지고 있어 여러 고온초전도 응용 기기 중 고온 초전도 변압기의 pancake-coil 형 권선에서의 spacer에 대한 절연 특성을 연구하였다. 이때 spacer는 pancake-coil의 턴간 절연내력을 유지하여야 하며, 또한 냉매 유동 통로를 확보하여야 한다. 하지만 실용상에 있어서는 절연물의 계면을 따라서 진전하는 연면 방전에 의한 절연내력이 관통절연 파괴전압에 비해 낮아 절연 설계 시 유의해야 한다. 따라서 pancake-coil형 고온초전도 변압기 권선을 위한 spacer에 대한 연면 방전 특성을 연구하였다.