• Journal of Environmental Science International
• /
• v.3 no.1
• /
• pp.49-56
• /
• 1994

Effect of the liquid circulation velocity on the biofilm development was investigated in an inverse fluidized bed biofilm reactor(IFBBR). To observe the effect of the influent COD concentration on biofilm simultaneously, the influent COD value was adjusted to 1000mg/1 f for 1st reactor, and 2500mg/l for 2nd reactor. The liquid circulation velocity was adjusted by controlling the initial liquid height. As the liquid circulation velocity was decreased, the settling amount of biomass was increased and the amount of effluent biomass was decreased. Since the friction of liquid was decreased by the decrease of liquid circulation velocity, the biofilm thickness was increased and the biofilm dry density was decreased. In the 1st reactor the SCOD removal efficiency was constant regardless of the variation of the liquid circulation velocity, but it was increased by the decrease of the liquid circulation velocity because of more biomass population in 2nd reactor.

• Journal of the KSME
• /
• v.31 no.8
• /
• pp.735-744
• /
• 1991

확산모델과 파모델의 결과에 있어 큰 차이가 일어나는 경우를 요약하면 다음과 같다. 1) 과도기 간이 짧다. 2) 작동온도가 아주 낮다. 3) 온도구배가 상당히 크다. 이때3)의 경우는 서로 다른 물질들이 접촉된 경우 또는 높은 열유속이 있는 경우 또는 얇은 표면층 등을 갖는 문제들의 공 통적인 특징이다. Non-Fourier 열전도 문제를 이용해 온도 분포를 예측해야 하는 실제적인 몇 가지 예를 살펴 보면 레이저 기술 또는 절대온도 영(zero)에 접근하는 온도에서의 액체 헬륨을 다루는 저온공학연구 또는 1/$10^{6}$Inch 정도의 표면조도가 관심사인 정밀공학 등을 들 수 있다. 또한 상당히 높은 강도의 열원이 작용될 때 고체에서의 크랙이나 보이드(void) 같은 국소 결함은 확산거동이 나타나기에 요구되는 시간보다 짧은 시간 구간에서 발생되어질 수 있으며, 크랙발생의 방향과 같은 것들은 hyperbolic 모델에의해 예측되어져야만 한다. 특히 움직이는 열원 또는 propagating crack tip을 갖는 경우에 그들 주위에서의 온도장을 규정짓는 가장 중요한 변 수는 열마하수 M이며, 아음속에서 초음속 영역으로 천이될 때 물리적 양들의 변화에 있어서 일어나는 현상들은 열충격의 형성에 기인하는데 이러한 현상들은 확산 모델로서는 예측될 수 없는 특징들이다. 이상에서 살펴볼 때 non-Fourier 모델에 대해 관심을 기울일 필요가 있다고 사료된다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.989-994
• /
• 1995

본 연구의 목적은 국내에서 개발중인 액체금속로의 면진설계를 위하여 면진층과 원자로용기 사이에 있는 내진벽의 강성이 면진시스템의 지진응답에 미치는 영향을 분석하는 것이다. 이를 위하여 내진벽강성을 고려한 모우드해석을 수행하여 내진벽의 강성변화에 따른 동특성해석을 수행하였으며 면진 및 비면진시스템의 경우에 대하여 지진해석을 수행하였다. 면진 및 비면진시스템에 대한 지진해석결과에서 비면진시스템의 경우에 내진벽강성은 지진응답에 영향을 주지만 면진시스템의 경우에는 그 영향이 매우 작은 것으로 나타났다.

• Journal of the Korea Society for Simulation
• /
• v.6 no.1
• /
• pp.53-60
• /
• 1997

Results from a nonequilibrium molecular dynamics (NEMD) simulation are presented for an argon liquid subject to a shear flow. The segmented molecular dynamics method and the subtraction technique used in NEMD program to reduce the thermal fluctuation noise in data are studied with different shear rates. The standard deviation in the shear stress reduced from 0.030 to 0.004 by the segmented molecular dynamics method for 50 repeated segments. On the other hand, the standard deviation of the data remained the same when the subtraction technique was applied, where as the results of shear stress by constant value in a random way.

• Journal of the KSME
• /
• v.30 no.3
• /
• pp.246-251
• /
• 1990

마이크로폴라 탄성이론은 다른 마이크로연속체(microcontinuum) 이론에 비해 적용이 간단하며, 실제 많은 물리적인 현상을 규명하는 데 다양하게 이용할 수 있다. 특히 고전 탄성이론에 의해 적절하게 해결될 수 없는 덤벨(dumbell) 분자로 이루어진 물체, 액체 결정체(liquid crystals), 과립상(granular)의 분자로 구성된 물체와 복합 섬유재료(composite fibrous materials) 등은 마 이크로폴라 탄성이론에 의해 잘 해결될 수 있다. 또한 마이크로폴라 탄성이론은 고체 내에서의 파의 전파(propagation)와 분산(dispersion), 구멍 주위의 응력집중과 외부 하중을 받는 물체에 있어 균열끝에서의 응력 분포 등의 고체역학 문제들은 물론이고, 경계층(boundary layer), 난 류(turbulence), 유체 유동의 불안정(instability)과 표면장력 현상 등의 유체역학에서의 복잡한 문제들을 해결하는 데에도 이용할 수 있다. 마이크로폴라 탄성이론은 고전 탄성이론에 비해 상 대적으로 새롭고 미개척 분야이긴 하지만 이론의 기반이 확고하기 때문에 앞으로의 회전응력 측정장치의 개발을 통해 미소구조의 영향을 고려해야 하는 많은 문제들을 해결하는데 큰 기여를 할 것으로 전망된다.

• Membrane Journal
• /
• v.2 no.2
• /
• pp.112-121
• /
• 1992

최근 십여년동안 자원, 에너지, 환경의 모든 면에서 기능성막의 역할이 증대해짐에 따라 기능성막에 대해 큰 관심이 모아지고 있다. 기존하는 기능성막의 소재면에서 볼 때 고분자막(고체막), 액체막으로 대별할 수 있으며, 이들의 경우 해수의 담수화, 원료 및 제품의 분리, 농축, 정제, 회수공정 또한 석유화학분야에서 고효율$\cdot$고선택성 기체혼합물 분리, 산업용 폐수처리분야 뿐 만 아니라, 태양에너지의 효과적인 이용, 전도성, 감광성, 광학특성막 등을 이용한 각종 센서제조 등 실로 광범위한 분야에서 응용되어지고 있다. 기능성막의 관점에서 볼 때, 고기능$\cdot$고효율$\cdot$고선택성을 가지는 막은 생태계에 존재하는 생체막이 가장 이상적이라 할 수 있다.

• The Journal of Engineering Research
• /
• v.6 no.2
• /
• pp.119-124
• /
• 2004

In this research montmorillonite intercalations complexes as organophilic clay compounds which have very different properties as the starting clay mineral were synthesized by the substitution of metal ions which exist in the montmorillonite layers with the organic cations which have long alkyl chain by the cation exchange reaction. Thereafter the obtained products dried in high vacuum were treated with the various swelling liquids such as dist. water, methanol, acetone, ether and acetonitrile in order to know the swelling behaviour of the synthesized complexes. Especially for this research Korean and Turkish clays were selected to compare the intercalations complexes of both clays and their swelling behaviour.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.2
• /
• pp.154-161
• /
• 1984

A modified technique of the transient hot wire method to measure the thermal conductivity of fluid has been described in this paper. The thermal conductivity of fluid can be obtained by acquiring wire temperature as a function of time. Multiplication of the inverse slope of the temperature versus logarithm of time by an instrumental constant gives the thermal conductivity. The constant voltage was applied to Wheatstone bridge circuit. The wire temperature can be measured as a function of time precisely with the aid of the data acquisition system composed of a microprocessor and an analog-digital converter. The thermal conductivity of the electrically conducting fluid has been measured with the insulated hot wire coated by electrically non-conducting material. The effect of the coated insulation layer on the thermal conductivity has been examined, in which it is confirmed that the thermal conductivity of electrically conducting liquid can be determined by the transient coated hot wire method. Thermal conductivities of methanol, carbontetrachrolide, Freon-22 and glycerin have been measured at room temperature in the pressure from 0.1MPa to 35.1MPa. The experiment has been performed to compare the data from the bare and the coated wires, and the results are satisfactory.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• Analytical Science and Technology
• /
• v.29 no.5
• /
• pp.225-233
• /
• 2016

The chemical engrafting of polymers on particle surface, plays an important role on selective partitioning of micro/nano-particles in the separated layers of liquid media, such as aqueous two phase systems (ATPSs). Three polymers, dextran, poly (ethylene glycol) and albumin were chosen and chemically conjugated to the polystyrene (PS) magnetic microparticle surface. The attachment of long-chained polymer chains which may switch the partition behavior, can be simply performed by S_N2 substitution of various polymers having primary amine functional groups, with p-toluenesulfonyl (tosyl)-activated polystyrene magnetic micro-particles. The surface modification of microparticle was probed by infrared microscopy. The distinctive peak represents N-H stretching vibration mode for microparticles after the reaction and it is common for all three polymers examined. The locations of main peaks are similar for all micro-particles but different and distinguishable in fingerprint region.