• Resources Recycling
• /
• v.27 no.4
• /
• pp.29-35
• /
• 2018

In this study, the electrochemical redox behavior of neodymium in non-aqueous electrolytes was investigated to confirm the possibility of neodymium metallurgy at room temperature. The non-aqueous electrolytes include ionic liquids such as $[C_4mim]PF_6$, $[C_4mim]Cl$, and $[P_{66614}]PF_6$, ethanol which are highly soluble in neodymium salts, and mixed electrolytes based on carbonate with highly electrochemical stability. The electrochemical redox properties of neodymium were better than those of other electrolytes in the case of the mixed electrolyte based on ethylene carbonate (EC)/di-ethylene carbonate (DEC). Ethanol was added to improve the physical properties of the mixed electrolyte. Thorough the analysis about ionic conductivity of EC/DEC ratio, ethanol content and $NdCl_3$ concentration, the best electrolyte composition was 50 vol% content of ethanol and 0.5 M of $NdCl_3$. Using cyclic voltametry and linear sweep voltametry, a current peak estimated at -3.8 V (vs. Pt-QRE) was observed as a limiting current of neodymium reduction. Potentiostatic electrolysis for 18 hours at room temperature at -6 V (vs. Pt-QRE) confirmed that metallic neodymium was electrodeposited.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.100-105
• /
• 2021

Recently, all-solid-state batteries have attracted much attention to improve safety of rechargeable lithium batteries, but the solid-state batteries of conductive ceramics or solid polymer electrolytes show poor electrochemical properties because of several problems such as high interfacial resistance and undesired reactions. To solve the problems of the reported all-solid-state batteries, a hybrid solid electrolyte is suggested, in this study, NASICON-type nanoparticle Li_1.5Al_0.5Ti_1.5P₃O₁₂ (LATP) conductive ceramic, PVdF-HFP, and a carbonate-based liquid electrolyte were composited to prepare a quasi-solid electrolyte. The hybrid solid electrolyte has a high voltage stability of 5.6 V and shows an suppress effect of lithium dendrite growth in the stripping-plating test. The LiNi_0.83Co_0.11Mn_0.06O₂ (NCM811)-based battery with the hybrid solid electrolyte exhibits a high discharge capacity of 241.5 mAh/g at a high charge-cut-off voltage of 4.8V and stable electrochemical reaction. The NCM811-based battery also shows 139.4 mAh/g discharge capacity without short circuit or explosion at 90℃. Therefore, the LATP-based hybrid solid electrolyte can be an effective solution to improve the safety and electrochemical properties of rechargeable lithium batteries.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.473-477
• /
• 2022

In this study, candidate technologies for lithium recovery from the process waste liquid generated in the waste battery recycling process were reviewed, and technologies applicable to the process from the commercialization point of view were reviewed from a qualitative point of view. The evaporation method is difficult to apply because it requires a large-scale land and shows a low recovery rate due to the loss of Li during the concentration process. In the case of precipitation, a commercially available technology shows a high recovery rate due to the high Li/Na selectivity of phosphoric acid, but there are disadvantages in that the process is complicated due to the use of expensive phosphoric acid, requiring a recovery step, and continuous operation is impossible because solids are handled in the Li concentration process. In the case of solvent extraction, if we find an inexpensive extractant with high Li/Na selectivity, continuous operation is possible with the method used in extraction of other metals in the previous step, and when Li is concentrated, continuous operation is possible because it is in a liquid state. If it shows a similar recovery rate compared to precipitation technology, commercialization will be the most likely.

• Journal of Life Science
• /
• v.34 no.1
• /
• pp.68-77
• /
• 2024

Airborne particulate matter (PM) is an environmentally hazardous pollutant that originates from various sources. PM is comprised of solid particles and liquid droplets of diverse composition and size. Hazardous chemical compositions of PM include elemental and organic carbon, organic compounds, biological compounds and metals. Upon acute and chronic PM exposure, toxic contaminants enter and accumulate within physiological systems and prompt cell structure changes accompanied with intracellular endoplasmic reticulum stress, mitochondrial dysfunction, oxidative stress, inflammation, lipid accumulation, and cell cycle arrest. Ultimately, these cellular response leads to the development of key characteristics of aging. In addition, PM internalization enhances autophagy reflux and lysosomal dysfunction, which is involved in cell aging. Previous studies have emphasized a positive association between PM and increased mortality or decreased lifespan, although these are evidenced mostly by observational studies. Direct evidence of the link between PM and aging is still limited. This review evaluates the evidence from not only observational studies but also in vitro and in vivo evidence of PM on aging progression and age-related diseases development. This evidence is based on age-associated cellular changes including endoplasmic reticulum stress, mitochondrial dysfunction, oxidative stress, inflammation, adipose accumulation, autophagy, which strengthen the association between PM exposure and aging. Understanding the underlying cellular responses under PM may allow for the development of new therapeutic targets for PM-induced aging.

• Microbiology and Biotechnology Letters
• /
• v.37 no.3
• /
• pp.204-212
• /
• 2009

A strain producing ${\alpha}$-galactosidase and ${\beta}$-glucosidase was isolated from Kimchi. The isolated strain was identified as Weissella cibaria by 16S rDNA analysis and designated as Weissella cibaria K-M1-4. The enzyme activity of ${\alpha}$-galactosidase and ${\beta}$-glucosidase reached the maximum in the soy medium at $37^{\circ}C$ for 24 hr. The enzymes were purified by ethanol fractionation, DEAE sepharose fast flow, and sephacryl S-100HR column chromatography. ${\alpha}$-Galactosidase specific activity was shown by 576 Units/mg protein and the yield was 3.5% of the total activity of crude extracts. ${\beta}$-glucosidase specific activity was shown by 480 Units/mg protein and the yield was 2.9% of the total activity of crude extracts. The optimum temperature for ${\alpha}$-galactosidase was $60^{\circ}C$ and 43% of its original activity remained when it was treated at $80^{\circ}C$ for 30 min. For ${\alpha}$-galactosidase shows the optimum pH of 8.0 and is fairly stable between pH5.0 and pH9.0. The enzyme activity was increased in the presence of $Fe^{2+}$ and $Cu^{2+}$. The value of Km and Vmax for the enzyme were 0.98 mM and $1.81{\mu}$mole/min, respectively. The ${\beta}$-glucosidase has the optimum temperature of $50^{\circ}C$ and 46% of its original activity remained when it was treated at $80^{\circ}C$ for 30min. Its optimum pH of 7.0 and is fairly stable between pH5.0 and pH9.0. The enzyme activity was increased in the presence of $Fe^{2+},\;Co^{2+}$ and $Cu^{2+}$. The value of Km and Vmax for the enzyme were 1.24 mM and $6.81{\mu}$mole/min, respectively.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.906-914
• /
• 1994

Plastic behavior of two-phase intermetallic compounds based on $LI_{2}$-type $(Al, Cr)_3$ Ti was investigated using compression test at R.T. and 77K. $LI_{2}$ single phase alloys and two-phase alloys consisting of mainly $LI_{2}$ phase and a few or 20% second phases were selected from AI-Ti-Cr phase diagram. In general, compared with Llz single phase, two-phase alloys consisting of 20% second phase showed relatively high yield strength and poor ductility. Among the alloys, however, AI-21Ti-23Cr alloy consisting of 20% $Cr_{2}Al$ phase showed available ductility as well as high yield strength. Plastic behavior of $LI_{2}$ single phase alloys and two-phase alloys consisting of a few% $Cr_{2}Al$ was also investigated. Homogenization of arc melted ingots substantially reduced the amount of second phases but introduced extensive pore. When Cr content increased in $Ll_{2}$ single phase alloys after the homogenization, the volume fraction of pore in the alloys decreased, and no residual pore was observed in two-phase alloys consisting of a few% $Cr_{2}Al$ phase. Environmental effect on the ductility of the alloys was investigated using compression test at different strain rates($1.2 \times 10^{-4}/s$ and $1.2 \times 10^{-2}/s$). Environmental embrittlement was least significant in A1-25Ti-10Cr alloy consisting of LIZ single phase among the alloys tested in this study. However, based on the combined estimation of the pore formation, environmental embrittlement and ingot cast structure, AI-21Ti-23Cr alloy consisting of 20% $Cr_{2}Al$ as the second phase is expected to show the best tensile elongation behavior.

• Economic and Environmental Geology
• /
• v.50 no.5
• /
• pp.341-352
• /
• 2017

Along with Cs-137 (half-life: 30.17 years), Sr-90 (half-life: 28.8 years) is one of the most important environmental monitoring radioactive elements. Rapid and easy monitoring method for Sr-90 using Laser-Induced Breakdown Spectroscopy (LIBS) has been studied. Strontium belongs to a bivalent alkaline earth metal such as calcium and has similar electron arrangement and size. Due to these similar chemical properties, it can easily enter into the human body through the food chain via water, soil, and crops when leaked into the environment. In addition, it is immersed into the bone at the case of human influx and causes the toxicity for a long time (biological half-life: about 50 years). It is a very reductive and related with the specific reaction that makes wet analysis difficult. In particular, radioactive strontium should be monitored by nuclear power plants but it is very difficult to be analysed from high-cost problems as well as low accuracy of analysis due to complicated analysis procedures, expensive analysis equipment, and a pretreatment process of using massive chemicals. Therefore, we introduce the Laser-Induced Breakdown Spectroscopy (LIBS) analysis method that analyzes the elements in the sample using the inherent spectrum by generating plasma on the sample using pulse energy, and it can be analyzed in a few seconds without preprocessing. A variety of analytical plates for samples were developed to improve the analytical sensitivity by optimizing the laser, wavelength, and time resolution. This can be effectively applied to real-time monitoring of radioactive wastewater discharged from a nuclear power plant, and furthermore, it can be applied as an emergency monitoring means such as possible future accidents at a nuclear power plants.