• Journal of Industrial Technology
• /
• v.35
• /
• pp.67-71
• /
• 2015

Various structures of particles were prepared by electrospray technique. In this research, solid particles were formed by electrospraying a solution of ethanol containing polyvinyl and tetraethyl orthosilicate. During the electrospray process, the ethanol solvent was evaporated, resulting in the solidification of precursors, forming solid particles. Evaporation of ethanol solvent also enhanced the mass transport which facilitated the development of porous and hollow structures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.21-29
• /
• 2002

In the present study, a passive control method, using a porous wall and cavity system, is applied to the shock wave/boundary layer interactions in transonic moist air flow. The two-dimensional, unsteady, compressible, Navier-Stokes equations, which are fully coupled with a droplet growth equation, are solved by the third-order MUSCL type TVD finite difference scheme. Baldwin-Lomax model is employed to close the governing equations. In order to investigate the effectiveness of the present control method, the total pressure loss of the flow and the time-dependent behaviour of shock motions are analyzed in detail. The computed results show that the present passive control method considerably reduces the total pressure losses due to the shock wave/boundary layer interaction in transonic moist air flow and suppresses the unsteady shock wave motions over the airfoil as well. It is also found that the location of the porous ventilation significantly affects the control effectiveness.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.682-685
• /
• 2017

An experimental study was carried out to investigate the injection characteristics of non-circular effervescent type twin-fluid nozzles. For this purpose, two types of non-circular nozzles (E1, E2) and one kind of circular nozzle (C) were used. At this time, the Aerorator mounted on the nozzle used three different diameters to match the aspect ratio with the nozzle exit area. Therefore, experiments were performed according to three aspect ratios for each nozzle, and a total experiments were conducted. Experiments were carried out by controlling the amount of air flowing after fixing the flow rate of the liquid, and the nozzle internal pressure and SMD were measured, and the jet image was taken from the nozzle. The discharge coefficients of the three kinds of nozzles were compared with the conventional equation and the Jedelsky's equation, and the Jedelsky's equation was found to be about 4 times larger. The droplet size (SMD) injected from the nozzle was found to be smaller in the non-circular shape than in the circular shape, which is expected to be caused by the difference of the discharge coefficient values.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.632-637
• /
• 2014

A microfluidic method for the in situ production of monodispersed alginate hydrogels using biocompatible polymer gelation by crosslinker mass transfer is described. Gelation of the hydrogel was achieved in situ by the dispersed calcium ion in the microfluidic device. The capillary number (Ca) and the flow rate of the disperse phase which are important operating parameters mainly influenced the formation of three distinctive flow regions, such as dripping, jetting, and unstable dripping. Under the formation of dripping region, monodispersed alginate hydrogels having a narrow size distribution (C.V=2.71%) were produced in the microfluidic device and the size of the hydrogels, ranging from 30 to $60{\mu}m$, could be easily controlled by varying the flow rate, viscosity, and interfacial tension. This simple microfluidic method for the production of monodisperse alginate hydrogels shows strong potential for use in delivery systems of foods, cosmetics, inks, and drugs, and spherical alginate hydrogels which have biocompatibility will be applied to cell transplantation.

• Clean Technology
• /
• v.27 no.2
• /
• pp.115-123
• /
• 2021

This study demonstrates a new method for the synthesis of organic-inorganic hybrid particles composed of an inorganic silica shell and organic core particles. The organic core particles are prepared with a uniform size using droplet-based microfluidic technology. In the process of preparing the organic core particles, uniform droplets are generated by independently controlling the flow rates of the dispersed phase containing photocurable resins and the continuous phase. After the generation of droplets in a microfluidic device, the droplets are photo-polymerized as particles by ultraviolet irradiation at the ends of microfluidic channels. The core particle is coated with a nano complex composed of polyallylamine hydrochloride (PAH) and phosphate ion (Pi) through strong non-covalent interactions such as hydrogen bonding and electrostatic interaction under optimized pH conditions. The polyamine nano complex rapidly induces the condensation reaction of silicic acid through the arranged amine groups of the main chain of PAH. Therefore, this method enabled the preparation of organic-inorganic hybrid particles coated with inorganic silica nanoparticles on the organic core. Finally, we demonstrated the synthesis of organic-inorganic hybrid particles in a short time under ambient and environmentally friendly conditions, and this is applicable to the production of organic-inorganic hybrid particles having various sizes and shapes.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.32-32
• /
• 1998

고체 추진제 로켓의 연소시에 발생되는 산화 알루미늄(A1$_2$O$_3$) 입자는 로켓 추진 노즐에서 팽창과정의 효율을 저하시키는 요소가 되며, 이러한 비효율성은 연소 가스와 입자간의 비평형 상태 효과와 기본적인 속도와 열적 차이에 의해서 발생된다고 보고되었다. 또한 연소시 발생된 산화 알루미늄 입자는 높은 열과 큰 운동량을 가지고 로켓 노즐 내부를 유동하게 되며, 매우 많은 량이 짧은 시간에 고온 고속으로 노즐 벽면이나 기타 구조물에 충돌 및 점착하기 때문에 로켓 노즐내의 표면이 손상을 입게 되고, 로켓의 방향 제어 및 조정 안정성이 저하되며, 구조적인 강도가 약화 될 수 있다. 또한 산화 알루미늄 액적들의 경우 노즐 벽면에 고착되게 되면 로켓의 중량 증가로 인해서 추력의 손실을 초래할 수 있다. 따라서 이러한 연소 부산물들의 운동 경로와 충돌 위치 및 표면에서의 충돌량과 그리고 충돌에 따른 마모량 및 점착 그리고 열전달 특성을 예측하는 것이 필수적이다.

• Journal of Power System Engineering
• /
• v.14 no.2
• /
• pp.5-11
• /
• 2010

분사연료의 혼합기형성과정 최적화를 통한 연소제어 기술은 디젤기관의 기관운전 및 배기특성을 향상시키기 위하여 매우 중요하다. 또한 분무의 혼합기형성 최적화를 위해서는 분사된 연료와 주위기체와의 혼합과정에 영향을 미치는 분무내부의 유동특성에 대한 연구는 필수 불가결하다. 따라서 본 연구에서는 고온 고압의 증발장에서 분무의 액상 거동에 주목하고, 그 거동특성을 통하여 증발디젤분무의 혼합기형성을 해석한다. 비정상 증발분무의 중심축에 레이저 시트광을 입사한 후, 액상분무 액적의 Mie 산란광에 의한 2차원 화상을 획득하여 증발분무 액상의 속도분포 및 와도(vorticity) 등을 구하였다. 분무의 속도분포 및 와도는 2차원 화상에 PIV법을 적용하여 계산하였다. 그림 1에 본 연구에서 구한 속도분포의 일례를 보인다. 본 연구의 결과로 상변화를 동반하는 비정상 증발장에서 구한 분무액상의 거동 특성은 상변화가 일어나지 않는 비증발장에 있어서의 분무거동특성과 유사함을 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.269-269
• /
• 2008

통상적으로 PCB 연성 기판에는 회로를 보호하기 위한 절연 보호 층이 부착되어 있다. 이 절연 보호 층은 보통 기계적 강도를 갖는 외부 층과 접착력을 가지는 2층 구조로 이루어져 있다. 필름 형태의 보호 층을 회로에 hot lamination 등의 공정을 수행하여 절연 보호 층이 형성된다. 본 연구에서는 복잡한 형상 제어와 보다 정밀한 제품에 응용하기 위하여 보호 층 형성 공정에 잉크젯 공법을 적용하였다. 잉크젯 공정을 이용할 경우 계산된 정략의 액적을 정확한 위치에 탄착시킴으로서 좀 더 정밀한 보호 층 형성이 가능하다. 또한 원하는 위치에 선택적으로 형성 가능한 잉크젯 공법의 장점으로 인해 현 공정대비 원가 절감의 효과가 극대화 된다. 본 연구에서는 보호 층형성에 필요한 재료 선정을 위한 열 경화 잉크 및 UV잉크의 토출성과 퍼짐성 분석 및 인쇄 공정에 대한 연구를 수행하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.3
• /
• pp.167-172
• /
• 2017

This study proposes a method for identifying correlations between tension and drop height for sessile droplets in a roll-to-roll processing system. The effect of tension and drop height on the contact angle of a sessile droplet is presented. Design of experiment (DOE) methodology and statistical analysis are used to define a correlation between the process parameters. The contact angle is decreased while increasing tension and drop height. The influence of the tension is less significant on the contact angle compared with the effect of the drop height. However, tension should be considered as a major parameter because it is not easy to fix with roll eccentricity and compensating speed of the driven roll. The results of this study show that the effect of tension on the contact angle of a sessile droplet is more important than drop height because the drop height is fixed when the process systems are determined.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.577-585
• /
• 2015

We fabricated multi-scale such as macro-, micro-, and multi-scale wrinkles by using repetitive volume dividing (RVD) method and thermal curing process. Also wrinkle surface was modified with coating of a self-assembled monolayer (SAM). We measured the contact angle of each wrinkled surface, and observed the behavior of droplets on sloping surface. Through experimental study, we found out that the contact angle was much higher in case of multi-scale and SAM coated wrinkles. And micro-scale wrinkle showed a high contact angle comparing with that of macro-scale wrinkle. Dynamic behaviors of a water droplet like sliding velocity on diverse wrinkled surfaces were dependent on their static contact angles. These results showed that hydro-dynamic characteristics were changed depending on the wrinkle structure and the material forming the wrinkle. These dynamic characteristics can be utilized in bio-chip, microfluidics, and many others in order to control easily chemical reactivity.