• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.94-100
• /
• 2016

Hydrogen production via steam reforming of bio-oil from algal biomass over fast pyrolysis with commercial catalysts was carried out. Aqueous bio-oil obtained by phase separation from a crude oil over fast pyrolysis was used as a reactant and comparison studies for activity over different catalysts (FCR-4-02, POS-7, Cat. A, RUA), reaction temperature, and steam/carbon (S/C) ratios were performed. Experimental results showed that different catalytic activities were observed with different S/C ratios and catalyst composition and the highest hydrogen yield of 70% was obtained with a POS-7 catalyst at a S/C ratio of 10 and 1073 K.

• Applied Chemistry for Engineering
• /
• v.4 no.3
• /
• pp.549-557
• /
• 1993

In the conversion of ethanol over heteropoly acids, we have studied catalytic reactivity, reaction mechanism, effect of organic bases added to reactant, and relation between acid strength of ion-exchanged catalysts and catalytic activities. The conversion of ethanol proceeded in the pseudoliquid phase of heteropoly acid. Due to this novel behavior, area increased by supporting with $SiO_2$. The reaction mechanism of ethylene production was different from that of ether production, and various partially substituted Al salts of 12-tungstophosphoric acid showed different catalytic activities.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.85-95
• /
• 2016

In this study, furfural, which is one of the value-added chemicals, was produced from the hydrolyzate of Quercus mongolica using dilute acid pretreatment, and the optimal pretreatment condition was determined by Response Surface Methodology (RSM) to obtain high yield of furfural. Based on Central Composite Design, the pretreatment experiment was designed with parameters such as reaction temperature ($X_1$), acid concentration ($X_2$), and reaction time ($X_3$) as independent variables, while dependent variable was furfural concentration (Y), and furfural yield (Z) was shown as percentage of Y per a dry weight basis. According to results of RSM, it was confirmed that reaction temperature ($X_1$) was the most influence factor and reaction temperature ($X_1$)-acid concentration ($X_2$) was the most significant interaction factor on furfural yield. Also, the optimal condition for the highest furfural yield was predicted at reaction temperature of $184^{\circ}C$, acid concentration of 1.17%, and reaction time of 5 min by RSM, and expected maximum yield of furfural was 6.37%. Experimentally, the maximum yield of furfural produced at above optimal condition was 6.21%, and it was considerably similar with the predicted value, and therefore the model for furfural production from the hydrolyzate of Quercus mongolica during dilute acid pretreatment could be built using RSM.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.363-368
• /
• 1999

Y-5a-Cu-O superconductors were prepared by TSMG (Top-Seeded Melt Growth) process with multiseeding technique. By using several seeds at the same time, large samples could be fabricated in a short time with simple heat treatment. However, the samples fabricated by normal multiseeding technique show the rapid decrease of trapped magnetic field value across the grain boundaries because of the residual liquid layer. To remove the residual liquid layer, modified multiseeding was newly suggested. The individual grains were combined as single domain, and did not show deterioration of magnetic property at the boundary. The formation mechanism of a well-combined domain by multiseeding technique was discussed.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.317-322
• /
• 2005

Various recovery methods were investigated to maximize hemicellulose recovery from lignocellulosic material hydrolyzed by pure water. The pretreatment conditions of water hydrolysis were $170\~180^{\circ}C$ and 1 hour of reaction time. The percentage of hemicellulose solubilized increased as the temperature increased from 170 to $180^{\circ}C$. However, significant decomposition of sugar was observed at temperature of $180^{\circ}C$. From the results of water hydrolysis, the total amount of glucan in solid residue and liquid hydrolyzate was close to the total glucan in the original biomass. For hemicellulose, however, there was a significant difference between both contents. To prove this difference, various recovery methods were proposed. From the total sugar accountability (sugar in liquid + sugar in solid), it was confirmed that hemicellulose recovery in the hydrolyzate was increased if the product including both hydrolyzate and solid residue was physically stimulated by such as heating and ultrasound irradiation. This indicated that, in commercial scale processes that much bigger substrate sizes are used and a sufficient amount of leaching solvent can not be used after pretreatment, a significant amount of oligomers could be trapped in the solid matrix.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.93-99
• /
• 2018

Effective extraction of platinum group elements by dissolving waste platinum scrap from the display industry and solvent extraction, was studied. The extracted platinum solution was prepared as a precursor solution for diesel automotive exhaust gas purification catalyst and its catalytic activity was tested. The behavior of aqueous species of platinum was investigated through solution chemistry and based on the existence and behavior of these chemical species, the possibility of extraction and separation was established. By dissolving waste scrap by electrochemical method, the dissolution time of scrap was shortened and the extraction efficiency was increased. Through separation and removal of rhodium component, solvent extraction by TBP, and stripping by hydrochloric acid, Pt-Chloride-$H_2O$ solution was prepared. And then, an platinum amine complex solution through amination reaction with this solution as a raw material was prepared. The possibility of producing high-value platinum compounds from platinum group waste scrap was investigated by preparing platinum amine complex solution and then examining the catalytic activity with this amine precursor on the combustion reaction of carbon black.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.740-748
• /
• 2001

출발원료 Si 분말의 입자크기를 다양하게 하여 질화반응 및 가스압 소결시 입자크기에 따른 산소함량의 차이에서 나타나는 상변화와 그로 인한 치밀화 거동, 미세구조 발달 및 기계적 특성에 대하여 고찰하였다. 145$0^{\circ}C$의 질화반응에서는 조대분말을 사용한 경우가 미세분말을 사용한 경우보다 높은 질화율을 나타냈으며, 각 분말크기에 따른 native oxide의 함량차에 따라 각기 다른 2차 결정상들이 검출되었다. 조대분말을 사용한 경우에는 제 2상의 석출로 인한 액상량의 부족으로 고온의 소결온도에서도 치밀화를 이루지 못해 낮은 강도값을 나타내었다. 한편, 미세분말을 사용한 경우에는 질화반응 후 석출된 제 2상이 소결온도가 증가함에 따라 용융되면서 치밀화를 이루어 높은 강도값을 나타내었다. 높은 강도값은 미세분말을 사용한 시편들에서 얻어졌으나 높은 파괴인성값은 상대적으로 큰 분말을 사용한 시편들에서 얻어졌는데, 이는 미세한 입자들로 구성된 기지상 내에 잘 발달된 주상정 입자들을 갖는 미세구조에 기인된 것으로 사료된다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.43-43
• /
• 2003

WC/Co계 초경 합금은 각종 공구 및 내마모 부품으로서 널리 사용되고 있다. 초경 합금의 특성은 WC 분말 크기에 크게 좌우되며 일반적으로 입자의 크기가 미세해 질수록 기계적 특성이 향상되는 것으로 알려지고 있다. 이를 위하여 지금까지 많은 연구가 진행되고 있으나, 현재 액상 공정을 이용하여 약 100nm급의 초경 분말이 개발되어지고 있으며, 그보다 미세한 분말의 제조는 아직 이루어지고 있지 않은 실정이다. 그러나 최근 기상 반응을 이용하여 수nm급의 분말 제조가 가능하게 되었으나, 주로 산화물계에 분말 제조에 국한되고 있다. 본 연구에서는 이러한 기상 반응법을 이용하여 초경 합금의 핵심 소재인 WC분말을 합성하고자 하였으며, 이를 위하여 장치의 설계 및 제작, 그리고 공정별 특성에 대하여 연구하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.39-45
• /
• 1996

핵비확산 목적으로 원심분무방법으로 저농축 우라늄 고밀도의 U$_3$Si$_2$구형분말 분산핵연료를 개발하는 일환으로 융점이 높은 U$_3$Si$_2$원심분무용 도가니와 nozzle에 적합한 재료를 선정하고자 zirconia계 물질과 yttria물질에 대한 양립성을 시험하였다. ZrO$_2$계 세라믹은 U$_3$Si$_2$와 우수한 양립성을 나타냈는데 부분 안정화시킨 Zirconia가 Crack 발생이 없어 완전 안정화시킨 것보다 내열충격이 더 양호한 것으로 보인다. Zirconia 도가니는 흑연과 반응하여 표면에 carbide를 형성하여 박리 되는 현상이 발생되었는데 부분 안정화 zirconia가 약간 더 많이 형성됨을 나타냈다. Yttria는 180$0^{\circ}C$이상에서 흑연과 반응하여 액상으로 형성되고 U$_3$Si$_2$와도 반응하여 사용에 부적합한 것으로 판명되었다. 내열충격이 비교적 우수한 부분 안정화 zirconia로 tundish를 제조하여 U$_3$Si$_2$를 원심분무한 결과 nozzle확장되지 않아서 입도분포가 협소한 분말을 얻는데 성공하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.120.1-120.1
• /
• 2014

고온 plasma는 전자, 이온, 중성입자로 구성된 이온화된 기체로 국소열평형 상태의 구성입자가 수천도에서 수만도에 이르는 큰열용량을 갖는 불꽃형태를 이루고있다. 따라서 고온 plasma는 고온, 고열로 대상물질을 용융 또는 기화시켜 물질의 물리적상태를 변화시키는 열원역활을 하거나, 높은반응성을 갖는 입자들에 의한 화학반응을 촉진하는 반응촉매로 작용하여 고기능성 부품소재, 에너지 환경, 원자력, 항공우주,유가금속 재활용등의 분야에서 핵심적인 역활을 하고 있슴니다. 본 발표에서는 연구소에서 지금까지 국책과제로 수행되었던 고온 plasma을 유해폐기물(병원, 유독 액상폐기물, 군화공폐기물, 중금속 함유 폐기물, 폐 plastic 가스화 등)처리에 관한 전반적인기술을 소개하고져함.