• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.32-38
• /
• 2009

In this paper, cycle performance analysis for cooling capacity, compression work and COP of R744($CO_2$) transcritical vapor compression refrigeration system is presented to offer the basic design data for the operating parameters of the system. The operating parameters considered in this study include superheating degree, outlet temperature of gas cooler and evaporating temperature in the R744 vapor compression cycle. The main results were summarized as follows : The cooling capacity of R744 increases with superheating degree, but decreases with the increasing evaporating temperature and outlet temperature of gas cooler. The compression work increases with superheating degree and cooling pressure of R744, but decreases with the increasing evaporating temperature. And, The COP increases with outlet temperature and evaporating temperature of R744 gas cooler, but decreases with the increasing superheating degree. Therefore, superheating degree, outlet temperature and evaporating temperature of R744 vapor compression refrigeration system have an effect on the cooling capacity, compression work and COP of this system. With a thorough grasp of these effect, it is necessary to design the compression refrigeration cycle using R744.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.735-742
• /
• 2005

The purpose of this study was to evaluate the salt water resistance of concrete depending on various types of cement. In this regard, 5 types of concrete were selected and their strength, void ratio and chloride ion diffusion characteristics were tested, and mutual correlation were analyzed. From the test results, the compressive strength and void ratio of concrete which using Type V cement was as good as Type I cement at long-term ages but the chloride diffusion coefficient of Type V cement was larger than Type I cement. And the concrete replacing some portion of the Type I cement with fly ash was superior in the cases of compressive strength, void ratio and the resistance of chloride ion permeation compared to the Type I cement with the lapse of ages. On the other hand, the compressive strength, the void ratio and the chloride diffusion coefficient of the concrete all indicated high levels of the correlation coefficient and the coefficient of determination regardless of the type of cement.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.206-211
• /
• 2015

Recently, for UHPC (Ulta High Performance Concrete) which is researched actively, as the tensile strength is absolutely influenced on the content of steel fiber, in this paper, experiments of compressive strength, elasticity modulus and tensile strength were performed according to compressive strength and content of steel fiber as variables. By the test results, compressive strength, elasticity modulus and tensile strength are proportioned and have a good correlation and according to content of steel fiber, compressive and tensile strength are also proportioned and have a good correlation. In case of elasticity modulus, the difference between test and present design code is not large, so it is possible to adapt to present design code. On the other hand, in case of tensile strength, as there is no specification of present design code, new prediction equation is proposed by using nonlinear regression analysis and the proposed equation have a good correlation to test results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.98-98
• /
• 2009

본 연구에서는 금속과 Graphite로 구성된 (100-x) Fe - x Graphite (x=40, 50, 60, 70, 80 wt%) 복합체의 기계적 특성(열팽창계수, 압축강도) 및 미세구조를 조사하였다, Fe-Grphite 복합체 제조는 각각의 Fe와 graphite 분말을 건식 혼합한 후, Hot press 사용해 온도 $1100^{\circ}C$, 압력 7ton 에서 복합체를 제조하였다. 제작된 시편은 SEM을 통하여 미세구조를 관찰하였고, Grphite 함량에 따른 열팽창계수 및 압축강도의 측정 값이 변화를 조사하였다. Graphite 함량이 증가함에 따라 열팽창계수는 감소하였으며 또한 압축강도도 감소하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2000.11b
• /
• pp.57-62
• /
• 2000

저전송률 영상통신을 위한 H.263 Version 2에 포함된 Advanced Intra Coding(AIC) 모드는 INTRA 매크로블록별로, DCT 계수의 예측을 위하여 세가지 Submode를 선택한 후, 선택된 submode에 따라 DCT계수 주사 방향과 양자화 방법, VLC 테이블을 달리 적용한다. 이 기술을 비디오 압축에 적용함으로써 기존의 H.263 baseline에 비해 더 높은 압축율과 객관적 화질의 향상을 얻을 수 있다. Advanced Intra Coding 모드에서 최적화된 방향 선택은 압축율을 최대로 얻을 수 있으나, 방향 선택을 위한 추가적인 메모리를 요구하고 계산량도 많아지게 된다. 본 논문은 ITU-T의 H.263 Version 2에서 제안하는 Advanced Intra Coding 모드를 사용할 때 필요한 DCT 계수의 예측 방향 선택을 위한 간략화 된 방법을 제안한다. 기존의 방법과 비교하여 성능이 비슷하면서 계산량이 간단하고, 메모리도 절약할 수 있는 방법을 제안함으로써, 최적화된 H.263 시스템을 구현하는 것이 목적이다.

• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.83-90
• /
• 2002

In this work, an improved method of EZW is suggested for efficient compression and transmission of image data. Here, coding efficiency is accomplished by embedded coding of significant coefficients using lower-level insignificant coefficients, and coding time is decreased by pre-coding of lower-level coefficients in coefficient detection. In simulation of designed architecture, the performance improvement of 1dB PSNR is confirmed compared with the results by the original En method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1282-1291
• /
• 1989

본 연구에서는 이러한 연구의 시작단계로 노즐내의 열 경계층 방정식을 정리하고 압축성 와점도모델을 도입하여 유한 차분법을 이용한 전산프로그램을 작성 하였다. 한편 실제로 추진모테에서는 고온 고속의 열기류가 분출되기 때문에 추진 하고 있는 동안 노즐벽을 형성하고 있는 내열재가 심하게 손상되어 표면의 상태가 매우 거칠게 된다. 더구나 경우에 따라서는 내열재가 용발(ablation)하게 된다. 이러한 상태를 감안하여 마찰계수와 열전달 계수를 합리적으로 추정해야만 노즐의 설계와 주변장치를 합리적으로 수행할 수 있다. 따라서 본 연구에는 주로 경계층 내의 압력구배, 압축성의 효과, 물성치의 변화를 고려한 기존 난류모델에 근거하여 프로그램을 작성하고, 이것을 토대로 노즐표면 조도의 영향 및 분출(blowing)의 영 향을 중점적으로 고려하여 그 특성을 연구하였다. 노즐벽에서 분출을 고려한 이유는 표면이 용발할 때 표면의 온도가 거의 일정하게 유지된 상태로 노즐표면이 화학작용을 수반하면서 가스화됨을 초보적으로 고려해보기 위함이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.547-549
• /
• 2002

본 논문에서는 웨이블릿(wavelet) 변환된 영상의 압축 방법으로 사용되는 SPIHT(Set Partitioning In Hierarchical Trees)을 이용하여 워터마크를 삽입하는 방법을 제안하였다. 기존의 특정 대역에만 워터마크를 삽입하는 방법은 화질열화와 압축의 두 가지 문제점을 동시에 해결할 수 없었다. 제안된 방법은 웨이블릿 변환된 영상의 계수 값이 동일한 방향을 갖는 부대역 간에 상관관계를 갖는 점을 이용하여 특정 대역이 아닌 중요 계수에만 워터마크를 삽입하므로써 강인성과 비 가시성이 증가되도록 하였다. 워터마크의 추출은 워터마크된 영상과 PN(Pseudo Noise)코드와의 계수 차를 이용하였으며, 워터마크가 삽입된 영상의 인증을 위해 통계학적인 접근 방법을 사용하였다. 실험을 통하여 워터마크가 삽입된 영상에 대해 손실 압축, 잡음, 크로핑, 리사이즈, 콜루션의 공격을 가한 결과 평균 유사도 값이 0.987의 높은 추출율을 보여 강인성을 입증하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.1
• /
• pp.63-70
• /
• 2001

EZW(Embedded coding using Zero-trees of Wavelet coefficients) decreases symbol-position information using zero-trees, but threshold value fall lot raising resolution, then coding cost of significant coefficients is expensive. To avoide this fact, this paper uses quad-tree representing coefficient-position information. a magnitude of significant coefficient is represented on matrix used at EZW. the proposed algorithm is hoped for raising a coding cost.

• Journal of the Korean Society for Railway
• /
• v.11 no.1
• /
• pp.61-68
• /
• 2008

Resilient modulus has been used for characterizing the stress-strain behavior of subgrade soils subjected to traffic loadings. With the recent release of the M-E Design Guide, highway agencies are further encouraged to implement the resilient modulus test to improve subgrade design. The subgrade design for the trackbed, however, is primarily relying on the static test results such as $K_{30}$ and deformation modulus, Ev. Therefore applicability of the resilient modulus for the design of trackbed needs to be evaluated. In this study, physical property tests, unconfined compressive tests and resilient modulus tests were conducted to assess the resilient and permanent strain behavior of 14 cohesive subgrade soils. A predictive model for estimating the resilient modulus is proposed based on the results of unconfined compressive tests and tangent elastic modulus, unconfined compressive strength, failure strain, secant modulus at peak, and yield strain. The predicted resilient moduli using the predictive models compared satisfactorily with measured ones. Although the permanent strain occurs during the resilient modulus test, the permanent behavior of subgrade soils is currently not taken into consideration.