• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.37-43
• /
• 2000

보통으로 다져진 실트질 모래(Dr=50%)에 대한 액상화 전후 상태에서의 반복하중에 의한 동적거동을 연구하기 위하여 몇가지의 압밀응력비로서 압밀시킨공시체에 대해서 일련의 일련의 반복삼축시험을 수행하였다. 연구결과로서 압밀응력비가 액상화거동에 미치는 영향을 나타내었으며 또한 액상화 전후의 동적거동을 비교하였다. 그리고 액상화 후의 거동은 선행액상화시의 응력반전여부에 의해서 절대적으로 좌우된다는 사실을 보여주고 있다. 결론적으로 액상화를 경험한 공시체의 액상화저항은 액상화를 경험하지 않은 공시체에 비해서 이방압밀의 경우에는 높고 등방압밀의 경우에는 낮다.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.25-32
• /
• 2005

The coefficient of consolidation has been evaluated using the conventional oedometer tests based on the one-dimensional consolidation theory. In the field, however, the actual response of the soil will be subject to the three-dimensional condition during consolidation. In this research, a new method f3r estimating the coefficient of consolidation for various stress-deformation conditions was proposed. The good agreement between the computed dissipation of pore pressure and the measured data confirms the usefulness and the applicability of the proposed method to predict the exact rate of consolidation.

• Geotechnical Engineering
• /
• v.9 no.4
• /
• pp.55-64
• /
• 1993

The Undrained creep tests on the normally consolidated clays with four different consolication ratios(c3c'/clc': 1.0, 0.7, 0.5, 0.4) were performed to investigate the effects of avisotropic consolidation on the undrained creep rupture behavior. The elapsed time to a certain minimum strain rate is decreased with decreasing the value of the consolidation pressure ratio, and the elapsed time to rupture for a certain minimum strain rate is also decreased with decreasing the ratio. The upper yield strength obtained from the equation suggested by Finn and Shead(1.) is coincided well with the creep strength irrespective of the magnitude of the consolidation pressure ratio, and the normallised upper yielding strength by mean confining pressure is decreased with increasing the consolidation pressure ratio. The critical strain for creep rupture, the strain at min. strain rate, is constant irrespective of the magnitude of creep stress, but it increased exponentially with increasing the ratio, It accordingly is dangerous that the potential of in-situ creep rupture is estimated only by the creep rupture test on the isotropically consolidated clay in case of K0-value below 1.0.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.7
• /
• pp.143-150
• /
• 2009

Material functions about effective stress, permeability, coefficient of consolidation and coefficient of volume change has important role to predict consolidation velocity and settlement of soft ground. Modified oedometer for radial drainage is adapted to find out material functions on laboratory tests. Undisturbed sample for laboratory tests were taken from construction sites of industrial complexes on southern coastal area which consists of upper dredged fill and lower original clay layer. For different drainage condition in consolidation process void ratio, effective stress, permeability, coefficient of consolidation and coefficient of volume change has been assessed with results of existing standard oedometer tests. It is worthwhile to note that consolidation material functions could be expressed as regression equation by Stark (2005), heterogeneity for permeability could be assessed from these relationships.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.211-216
• /
• 2003

굴폐각은 굴양식 후 남는 것으로 남해안에서 주로 집중적으로 발생하는데 연간 28만톤의 발생량 중 상당양은 폐기물로 계속 누적되고 혹은 불법매립되어 환경오염 문제까지 발생시키고 있다. 본 연구에서는 산업폐기물로 분류되는 굴패각을 지반공학 분야에서 활용하기 위한 대안으로 해성점토와 혼합하여 매립재료로써의 적용성을 평가하기 위하여 대형 압밀기를 이용하여 실험을 실시하고 이를 토대로 기초자료를 획득하고자 하였다. 원형의 굴패각을 파쇄하여 입도별로 분류하고 이중 사질토 입경 크기의 재료에 대한 기본 물성치를 평가하고 지반 재료로써의 적용성를 분석하였다. 해성점토 내의 굴패각입자의 혼합비를 변화시켜 만들어진 혼합토에 대한 압밀 실험 결과 굴패각의 혼합율이 증가할수록 체적변화율이 작게 되고, 침하 속도는 빠르게 증가함을 알 수 있었다. 이는 압밀응력의 일부를 굴패각 입자의 골격구조가 부담함으로써 실제 점토부분에 작용하는 압밀응력은 굴패각 혼합율이 증가할수록 작아지는 것으로 판단된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.1
• /
• pp.18-26
• /
• 2004

In order to accelerate the rate of consolidation settlement, to reduce settlement, and to increase bearing capacity for soft ground under quay, sand compaction pile method (SCP) has usually been applied. SCP-reinforced ground is composite soil which consists of the sand pile and the surrounding soft soil. One of main important considerations in design and analysis for SCP-reinforced soils is stress concentration ratio according to area replacement ratio. In this paper, the numerical analysis was conducted to investigate characteristics of stress concentration ratio in composite ground. It was found that stress concentration ratio of composite ground is not constant as well as depends on several factors such as area replacement ratio, depth of soft soil, and consolidation process. The values of stress concentration ratio increase during loading stage due to stress transfer of composite soil, and reach up to 2.5∼12 according to area replacement ratio at the end of construction. After the end of consolidation, however, these values are converged to 2.5 to 6.0 irrespective of area replacement ratio due to increase in effective stress of soft soil during consolidation process.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.7
• /
• pp.15-25
• /
• 2016

In the present work, a number of advanced three-dimensional (3D) parametric finite element numerical analyses have been conducted to study the behaviour of single piles and pile groups in consolidating ground from coupled consolidation analyses. Single piles, $4{\times}4$ and $6{\times}6$ piles inside groups with a spacing of 2.5D were considered, where D is the pile diameter. It has been found that dragload and downdrag on the piles developed rather quickly at the early stage of consolidation. However, when the degree of consolidation was more than 50~75%, only little increases of dragload and downdrag were induced on the pile. Negative Skin Friction (NSF) on the pile in the fill layer was mobilised quickly and remained constant throughout further consolidation. The development of NSF is influenced both by the relative shear displacements at the pile-soil interface and the vertical effective soil stresses during consolidation. The former governed the early stage of consolidation and the latter affected the later stage of consolidation. The vertical effective soil stresses adjacent to the piles were reduced due to the shear stress transfer at the pile-soil interface, in particular for piles inside the pile groups. The range of NSF influence zone concerning the reductions of the effective vertical soil stresses was about 20D measured from the piles in the horizontal direction. On the contrary, the effective horizontal soil stresses acting on the piles were similar to those at the far field.

• Geotechnical Engineering
• /
• v.10 no.1
• /
• pp.63-70
• /
• 1994

In-situ soil is anisotropically consolidated at rest, and the coefficient of earth pressure at rest $K_0$ is dependent on the properties of soil and stress history. In order to estimate roughly the in-situ undrained shear strength of a $K_0$-anisotropically normally consolidated clay from isotropic consolidated undrained test, consolidated undrained shear testy with four different consolidation pressure ratios ($K={\sigma}'_{3c}/{\sigma}'_{1c}$) were performed and test results showed K-$\alpha$ relationship, representing the strength ratio $\alpha$ as ($S_u/{\sigma}'_{1c})_{CKU}=\alpha(S_u/{\sigma}'_{1c})_{CIU}$. Strength ratio u increases with increasing consolidation pressure ratio. And the angle of internal friction $\Phi'$and angle ratio $\Phi'_{CKU}/\Phi'_{CIU}/$ are increased with the increament of K-value.

• Geotechnical Engineering
• /
• v.11 no.1
• /
• pp.41-50
• /
• 1995

In situ clay soils with Ko condition have anisotropic characteristics, varying the response according to the principal stress direction upon loading. But because of their practicality and simplicity, consolidated isotropic undrained compression tests are commonly used in practice to determine the behavior of cohesive soils. In this study to investigate the anisotropic characteristics and the effects of consolidation stress states on the response of normally consolidated clay soils during shearing, triaxial compression and extension tests after consolidating the undisturbed clay soil samples, which are obtained as a block sample to normalized consolidation states under isotropic or Ko state, were carried out. As a result of tests, the anisotropy of the undrained strength was confirmed. Comparing the soil responses between isotropic and Ko consolidation, the undrained strength by isotropic consolidation is overestimated because of its higher mean consolidation pressure. And isotropic consolidation reduces the anisotropy of soil response and influences on the stress-strain behavior and pore pressure response because the animotropic soil structure is partially collapsed during isotropic consolidation process. Also, OCR in overconsolidated soils is decreased by isotropic consolidatiorL Friction angle in eztension is higher than that in compression, but regression analysis shows that friction angle with cohesion in extension is almost the same as that without cohesion in compresslon.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.2
• /
• pp.103-113
• /
• 2000

기존의 Terzaghi 압밀이론은 상대적으로 연약토층이 두껍지 않고, 초기함수비가 낮으며 적은 유효응력의 증가가 예상되는 곳에 그 적용이 제한되어 있었다. 그 이유는 Therzaghi 압미이론 자체가 미소변형률과 선형적인 압축성 및 투수성등을 기본적인 가정사항으로 내포하고 있기 때문이다. 이러한 가정사항을 극복하고자 Gibson et al. 은 일차원 비선형 유한 변형률 압밀이론에 관한 엄밀해를 제시하였다. 이 이론은 기존의 많은 가정사항들을 극복하여 실제 현상에 더욱 부합하는 예측을 할 수 있는 장점이 있는 반면, 비선형적인 응력-변형 관계, 변형-투수계수 관계의 도입과 좌표변환 및 현장의 시고이력을 그대로 적용하는데 많은 어려움이 있는 것이 사실이다. 본 연구에서는 이러한 비선형 유한형태를 압밀이론을 이용한 압밀현상 예측을 위하여, 비선형적인 응력-변형 관계, 변형-투수계수 관계에 관한 함수식을 구성하고 이를 포함하는 컴퓨터 프로그램을 개발하였다. 개발 프로그램은 많은 폼과 모듈로 구성되어 있는데, 이러한 각각의 폼과 모듈은 GUI 기능의 극대화를 통해 복잡한 이론에 익숙하지 않은 실무자들이 쉽게 본 이론을 이용할 수 있도록 설계 되었다. 또한 개발프로그램은 다양한 하중단계 및 비선형적인 응력-변형 관계, 변형-투수계수 관계에 관한 회귀분석, 각 유효응력 단계별 상이한 비선형 계수 g와 λ를 적용할 수 있으며, 계산을 위한 전처리과정은 물론 계산된 결과를 위한 다양한 후처리과정이 모두 사용자 위주의 GUI 기능을 충분히 갖도록 설계되었다. 개발 프로그램의 검증을 위하여 실제 현장의 계측자료 및 기존 연구문헌상의 결과와 본 개발 프로그램의 예측결과를 비교.분석하였으며, 다양한 간극비 상태의 비선형 계수가 해석결과에 미치는 영향을 알아보았다.