• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.5
• /
• pp.486-491
• /
• 2010

In this paper, it is identified that high-level vibration of the single phase main power transformers shut down due to the mechanical fault. vibration sources of the SPR in the transformer's are identified and the SPR vibrations are reduced by structural modification. For vibration characteristic identification, vibration signals were measured with an accelerometer when the transformer is driving. These signals are presented in a FFT analysis in order to find the dependency of frequency components on the transformer. From finite element analyses and some experiments, it is also found that resonances occur because the natural frequencies of the SPR exist in usual driving range. To shift the natural frequencies outside the driving range, the SPR is modified by increasing stiffness. It is verified that considerable amounts of vibration are reduced by the structural modification.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.655-656
• /
• 2004

1) 제어봉의 전자 클러치는 직류전원 공급 장치에 의해 12V의 직류 전력을 공급받으며 전압 강하에 대한 내성이 좋다. 제어봉은 10V의 전압이 525msec 이상 지속될 때 전자력 상실로 낙하한다. 완전정전(0V)이 발생하여도 직류전원 공급 장치는 500msec 동안 전자클러치에 직류전력을 공급하여 제어봉의 연결 상태를 유지하도록 한다. 2) 정지봉 계통에 대한 전압강하의 영향은 제어회로를 구성하는 전자접촉기의 개방에 의하여 펌프의 전원공급이 차단되고, 그 결과 정지봉이 낙하한다. 정지봉은 펌프의 전원이 상실되면 수압 실린더의 압력 상실로 약 1000msec 후에 낙하한기 시작한다. 그림 2는 제어봉 및 정지봉에 대한 정전 영향을 시간에 따라 표시한 것이다. 3) 1차 및 2차 냉각계통의 부족전압 계전기에 의해 펌프가 정지할 때까지 저유량 신호 및 N/T mismatch 신호에 의한 원자로 정지신호는 발생되지 않는다. 따라서 정지봉 및 제어봉 계통에 적용하고자 하는 순간정전 보상장치는 부족전압 계전기 동작시간 이내의 보상시간에서만 가능할 것이다.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.112-117
• /
• 2017

This research discusses the correlation about fire mechanism based on real fire cases. Electric power condenser failure mechanism is classified into 7 steps and fire mechanism is classified into 12 steps. In the 5th step, the procedure of operating a protection channel of a protection relay was identical in the case of the failure and fire. As the fire occurrence mechanism was applied from the 6th step, internal pressure was increased because of gas generation produced by internal combustion phenomenon and arc. This caused explosion in 10st step of fire occurrence mechanism. In 11th step, the flame such as arc gushed out with insulating oil which caused fire and leaded to second accident. This kind of step correlation could play an important part to examine fire.