• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.300.1-300.1
• /
• 2013

반사방지막 코팅(Anti-reflection coating)은 태양전지(Solar cell), 발광다이오드(LED) 등의 반사율을 낮추어 효율을 증대시키기 위하여 사용되고 있다. 본 실험에서는 유리 기판 위에 실리콘 타겟을 이용한 Reactive magnetron sputtering 장비를 활용하여, 50~100 mTorr의 높은 공정 압력(High pressure)에서 증착하여 SiO2 반사방지막 코팅층을 형성하였다. Ellipsometer를 이용하여 SiO2 박막층의 굴절률(Refractive index)을 측정한 결과, 공정 압력에 따라 SiO2 박막이 다양한 굴절률을 가지는 것을 확인할 수 있었다. 또한, UV-Vis spectrometer를 이용하여, 450~600 nm 파장에서의 반사율(Reflectance)과 투과율(Transmittance)을 측정하여 비교, 분석하였다. 나아가 증착된 SiO2 반사방지막을 비정질 실리콘 박막 태양전지에 적용하여 효율 향상 효과를 실험하였다. 이를 활용하여 낮은 굴절률을 갖는 반사방지용 SiO2 코팅층을 형성하여 태양전지의 광 변환 효율을 상승 시킬 수 있고, 발광다이오드의 광 추출 효율을 증가시킬 있을 것으로 여겨진다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.331-355
• /
• 1997

본 연구에서는 에어챔버가 설치된 펌프관로계에서 수격현상에 대한 현장실험을 실시하고, 에어챔버의 입력변수 및 설계인자가 수격현상에 어떠한 영향을 미치는지 수치계산과 실험을 통하여 조사한 후 다음과 같은 결론을 얻었다. (1) 수치계산에 사용된 입력변수중 폴리트로프지수, 오리피스 유량계수, 압력파 전파속도순으로 수격현상에 대한 영향이 크게 나타났으며, 수치계산은 이 변수값이 각각 1.3, 0.7, 1,050m/s일 때 측정된 압력변동 및 공기체적변화를 가장 잘 모사하였다. (2) 에어챔버내 초기공기체적이 증가하면 압축공기의 압력변화율이 작아지기 때문에 수격현상의 주기는 길어지고, 관로내 압력변화는 감소하였다. 측관에 설치한 오리피스 내경을 줄임으로써 상승압은 상당히 완화되었으며, 시간이 지남에 따라 수격작용도 보다 빨리 감쇄되었다. 수치계산결과는 수격현상의 1-2주기까지 측정값과 비교적 잘 일치하였으며, 펌프관로계에 작용하는 최대.최소압력 및 그 발생시간도 합리적으로 예측되었다. (3) 수치계산은 측정된 과도특성 값들을 약 5%이내의 오차로 예측하였으며, 개발된 전산프로그램은 실제 펌프관로계에 대한 수격완화장치를 설계하는데 매우 유용하게 사용될 것으로 판단된다.

• International Area Studies Review
• /
• v.12 no.3
• /
• pp.49-67
• /
• 2008

In this paper, we address the problem of optimal monetary policy rule in the presence of abrupt shifts in the structure of the economy. To do so, we first estimate a Markov switching model for the US housing price inflation, and find evidence supporting the presence of two distinct regimes for the US housing price inflation. One of the two regimes identified appears 'usual', in that housing price inflation negatively responds to higher real interest rate. The other regime is 'unusual', in that the housing price inflation is positively related with real interest rate. We then solve an optimal control problem of the FRB under the presence of the two regimes thus identified. The optimal policy is 'asymmetric' in that the optimal responses in the 'usual' regime require the FRB to lean against the wind to inflationary pressure, while the FRB is recommended to accommodate it in the unusual regime. It is also found that the optimal degree of responses is more conservative when the FRB acknowledges the uncertainty about future regime.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.75-79
• /
• 1996

유량 보존 경계 조건을 적용하여 커넥팅 로드 베어링의 성능 해석을 수행하였다. 레이놀즈 경계 조건을 적용하는 경우에 비하여 최소 유막 두께, 동력 손실율과 축방향 유량은 더 작게, 최대 유막 압력은 더 크게 예측되었다. 유량 보존 경계 조건을 적용한 경우 축 방향으로의 공급 유량과 방출 유량이 거의 균형을 이루었다. 물리적으로 타당한 유량 보존 경계 조건을 적용한 커넥팅 로드 베어링의 성능 해석으로 얻어진 동력 손실율과 축 방향 유량을 이용하면, 윤활제의 온도 상승과 그에 따른 점도 변화를 좀 더 정확하게 예측 할 수 있을 것으로 기대된다.

• Journal of Power System Engineering
• /
• v.13 no.6
• /
• pp.29-34
• /
• 2009

Recently, we have a lot interest in a sudden rise of oil prices and a change weather for the earth warmming, so, development of new alternative fuels need in order to spare fossil fuel and reduce exhaust emissions for air pollution prevention. Biodiesel, which can be generated from natural renewable sources such as new or used vegetable oils or animal fats, may be used as fuel in diesel engine of compression ignition engine. In this paper, the combustion characteristics between neat diesel oil and biodiesel blends(10 vol.% biodiesel and 20 vol.% biodiesel) were tested using four stroke, direct injection diesel engine, especially this biodiesel was produced from soybean oil at our laboratory. This analysis showed that cylinder pressures, the rate of pressure rises and the rate of heat releases were decreased as the blending ratios of biodiesel to diesel oil increased because of lower heating value of biodiesel in spite of increased oxygen content in biodiesel.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.690-700
• /
• 2000

In this study, an elastomer-assistered compression molding process was investigated by experiments as well as modeling for the long-fiber reinforced thermoset composites. The consolidation pressure generated by fixed-volume and variable-volume conditions was thermodynamically derived for both elastomer and curing prepregs, and was compared with the pressure measured during curing of epoxy matrix. Exhibiting non-linear viscoelastic characteristics in the compressive stress-strain tests, the measured stress was well compared with a modifed KWW (Kohlrausch-Williame-Watts) equation, which is based on the Maxwell viscoelastic model. Using the developed model equations, the consolidation pressure generated by the elastomer was successfully predicted for the compression molding process of thermoset composite materials in tile closed mold system.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.107-114
• /
• 2003

Among soft ground treatment methods with granular soil used in domestic, the sand compaction pile method has been utilized greatly, but, as a result of exhaustion of sand and increase of unit cost, the necessity of an alternative method is suggested. In this study, the static load tests for crushed-stone compaction piles which were constructed on test field were performed. Based on test results, stress concentration ratios between the crushed-stone compaction pile and the soft ground were investigated and estimated. At loading pressure, settlement showed decreasing tendency as replacement rate increases. At replacement rate of 20%, yield pressure was smaller but, at replacement rates of 30% and 40%, settlement and yield pressure were similar. The stress concentration ratio was within the range of 1.7 to 3.0 and it was higher as replacement rate increased.

• Plant Journal
• /
• v.18 no.3
• /
• pp.28-40
• /
• 2022

As the proportion of renewable energy generation is expected to increase, public power generation businesses need to actively consider implementing the expansion of biomass mixing, In this study, the biomass co-firing rate is being changed from 0wt.% to 5.0wt.% at 500MW coal-fired power plant, measuring the major operation characteristics of the pulverizer. First, the composition analysis and grinding characteristics of lignocelluosic biomass were examined, and the effect of volume increase on dirrerential bowl pressure difference, motor current, coal spillage, outlet temperature, and internal fire count was analyzed. As the co-firing rate increased, it was confirmed that the difference in the differential bowl pressure, motor current, and coal spillage treated increased, and the outlet temperature was minimal. The number of internal fires is difficult to find a clear correlation, but it has been confirmed that it is highly likely to occur in combination with other driving factors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.604-608
• /
• 2002

Accelerated solvent extraction (ASE) was used for a rapid and simple extraction of propylenchlorohydrin (PCH) residue in hydroxylpropyl modified starch. The effects of temperature, pressure and extraction solvent on the extraction efficiency were investigated to find the optimal condition of ASE. The optimal conditions for PCH extraction in hydroxylpropyl modified starch were static time of 50 min, purge time of 300 sec, heating time of 5min, temperature of 12$0^{\circ}C$, pressure of 2500 psi, flush (%) with 100 volumes, and ethylacetate as an extraction solvent. The recovery (96.1%) of this method was higher than that (76.4%) of Code of Food Additive. Therefore, the ASE was a good method in both aspects of efficiency and effectiveness.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.525-527
• /
• 2009

본 논문에서는 자동차 공조부품인 리시버드라이어로서 플랜지와 바디로 구성되어 있다. 리시버드라이어는 냉매 중 포함된 습기 및 기타 불순물을 차단하는 부품으로서 사이트글라스가 부착되어 냉매의 흐름의 상태를 알 수 있다. 또한 압력 밸브가 부착되어 있어 냉매 회로의 압력과 온도가 상승하면 녹아서 냉매를 배출하므로 배관이나 부품들의 압력에 의해서 파괴되는 것을 방지 할 수 있다. 최근 경제적 성형에 관심이 많아 대표적 성형공정인 냉간단조를 적용하여 소재 회수율 및 절삭 비용 등을 절감하는데 목적을 두었다. 냉간단조를 적용하여 자동차 공조 부품인 플랜지와 바디를 개발하는데 공정설계, 금형설계, 금형제작 기술을 확보하였다.