• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.961-968
• /
• 1998

In order to investigate the effects of substrate bias voltage on the formation of$ZnS-SiO_2$ protective film in phase change optical disk by R.F. magnetron sputtering method, thin dielectric film was formed on Si wafer and Corning glass by using ZnS(80mol%)-$SiO_2$(20mol%)t arget under argon gas. In this study, the Taguchi experimental method was applied in order to obtain optimum conditions with reduced number of experiments and to control numerous variables effectively. At the same time this method can assure the reproducibility of experiments. Optimum conditions for film formation obtained by above method were target RF power of 200 W. substrate RF power of 20 W, Ar pressure of 5 mTorr. sputtering time of 20 min.. respectively. The phase of specimen was determined by using XRD and TEM. The compositional analysis of specimen was performed by XPS test. In order to measure the thermal resistivity of deposited specimen, annealing test was carried out at $300^{\circ}C$ and $600^{\circ}C$. For the account of void fraction in thin film, the Bruggeman EMA(Effective Medium Approximation) method was applied using the optical data obtained by Spectroscopic Ellipsometry. According to the results of this work, the existence of strong interaction between bias voltage and sputtering time was confirmed for refractive index value. According to XRD and TEM analysis of specimen, the film structure formed in bias voltage resulted in more refined structures than that formed without bias voltage. But excess bias voltage resulted in grain growth in thin film. It was confirmed that the application of optimum bias voltage increased film density by reduction of void fraction of about 3.7%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.346-353
• /
• 2016

In the design conditions of some research reactors, the siphon phenomenon can cause continuous efflux of water during pipe rupture. A siphon breaker is a safety device that can prevent water efflux effectively. However, the analysis of the siphon breaking is complicated because many variables must be included in the calculation process. For this reason, a simulation program was developed with a user-friendly GUI to analyze the siphon breaking easily. The program was developed by MFC programming using Visual Studio 2012 in Windows 8. After saving the input parameters from a user, the program proceeds with three steps of calculation using fluid mechanics formulas. Bernoulli's equation is used to calculate the velocity, quantity, water level, undershooting, pressure, loss coefficient, and factors related to the two-phase flow. The Chisholm model is used to predict the results from a real-scale experiment. The simulation results are shown in a graph, through which a user can examine the total breaking situation. It is also possible to save all of the resulting data. The program allows a user to easily confirm the status of the siphon breaking and would be helpful in the design of siphon breakers.

• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.581-586
• /
• 2006

We have generated the argon plasma in the diode chamber based on the established coaxial electrode type and investigated the emitted visible light for emission spectroscopy. We applied various voltages $2\sim3.5kV$ to the device by 0.5kV, and obtained the emission spectrum data for the focused plasma in the diode chamber on the argon pressure of 330 mTorr. The Ar I and Ar II emission line are observed. The electron temperature and ion density have been measured by the Boltzmann plot and Saha equation from assumption of local thermodynamic equilibrium (LTE) The Ar I and Ar II ion densities have been calculated to be $\sim10^{15}/cc\;and\;~10^{13}/cc$, respectively, from Saha equation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.718-725
• /
• 2017

A liquid storage tank is one of the most important structures in industrial complexes dealing with chemicals, and its structural damage due to an earthquake may cause a disastrous event such as the leakage of hazardous materials, fire, and explosion. It is thus essential to assess the seismic fragility of liquid storage tanks and prepare for seismic events in advance. When a liquid storage tank is oscillated by a seismic load, the hydrodynamic pressure caused by the liquid-structure interaction increases the stress and causes structural damage to the tank. Meanwhile, the seismic fragility of the structure can be estimated by considering the various sources of uncertainty and calculating the failure probabilities in a given limiting state. To accurately evaluate the seismic fragility of liquid storage tanks, a sophisticated finite element analysis is required during their reliability analysis. Therefore, in this study, FERUM-ABAQUS, a recently-developed computational platform integrated with commercial finite element and reliability analysis software packages, is introduced to perform the finite element reliability analysis and calculate the failure probability of a liquid storage tank subjected to a seismic load. FERUM-ABAUS allows for automatic data exchange between these two software packages and for the efficient seismic fragility assessment of a structure. Using this computational platform, the seismic fragility curve of a liquid storage tank is successfully obtained.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.156-163
• /
• 2015

In this paper, we propose an active water level and distance measurement algorithm using a light beam pattern. On behalf of conventional water level gauge types of pressure, float-well, ultrasonic, radar, and others, recently, extensive research for video analysis based water level measurement methods is gradually increasing as an importance of accurate measurement, monitoring convenience, and much more has been emphasized. By turning a reference light beam pattern on bridge or embankment actively, we suggest a new approach that analyzes and processes the projected light beam pattern image obtained from camera device, measures automatically water level and distance between a camera and a bridge or a levee. As contrasted with conventional methods that passively have to analyze captured video information for recognition of a watermark attached on a bridge or specific marker, we actively use the reference light beam pattern suited to the installed bridge environment. So, our method offers a robust water level measurement. The reasons are as follows. At first, our algorithm is effective against unfavorable visual field, pollution or damage of watermark, and so on, and in the next, this is possible to monitor in real-time the portable-based local situation by day and night. Furthermore, our method is not need additional floodlight. Tests are simulated under indoor environment conditions from distance measurement over 0.4-1.4m and height measurement over 13.5-32.5cm.

• Korea Real Estate Review
• /
• v.28 no.4
• /
• pp.75-88
• /
• 2018

The purpose of this study is to analyze the effect of the spread on housing mortgage loans. In particular, this study analyzes how the spread has a decisive effect on housing mortgage loans when a structural change occurs in the spread. For the sake of empirical analysis, this study utilizes the housing mortgage loan, housing mortgage loan interest rate, COFIX interest rate, and spread. The period of analysis is from December 2010 to December 2017. Results of the analysis show that there is a statistically significant structural change in the spread and housing mortgage loans (May and June 2015, respectively). It is estimated that the structural change in the spread has an influence on the structural change in housing mortgage loans. In addition, the effect of the spread on housing mortgage loans is larger than the effect of the COFIX interest rate and the housing mortgage loan interest rate. This indicates that the adjustment of the spread is a significant burden on housing mortgage loans. As economic uncertainties both internally and externally are increasing, pressure on interest rate hikes is also increasing. Considering these circumstances, interest rate hikes will be inevitable in the future. If the base interest rate and the spread increase simultaneously at Korea's current economic level, it will obviously lead to an economic recession as the burden on the repayment of principal and interest of housing mortgage loans will increase. Therefore, it is imperative that financial authorities prepare institutional arrangements in order to protect financial consumers by preventing arbitrary calculation of the spread, which would not be objective and would not be transparent from the banks.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.3
• /
• pp.51-63
• /
• 2021

This study is for the quality improvement of water-sealing & reinforcement grouting in tunnel of the construction of the underground transportation network underneath the city. Existing tunnel grouting process did not technically utilize P~q~t charts fully. It is due to the absence of technical methods to decide how P~q~t charts change in the presence of trouble and what the change represents in grouting. There were no standards to decide which chart pattern represents which ground characteristics, how to categorize ground types, and how to take measures according to the standards. This paper studies on the grouting type, ground characteristics, ground type categorizing method, and countermeasures for both general and algorithm-processed grouting in soil and rock layer to address the aforementioned problems. Newly improved P~q~t charts from grouting in soil was categorized into six different types. Different characteristics and categorization method was developed for each type. Countermeasures for each type of grouting process were developed so that on-site application can be readily available. Improved P~q~t charts for rock layer also have six different types of grouting. Each type was given the countermeasures for rock layer grouting process for easier applications. Therefore, it is expected to be used through out the entire process of grouting from preparation to the last report of the water-sealing & reinforcement grouting in tunnel of the construction of the underground transportation network underneath the city.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.78-87
• /
• 2021

This paper analyzes the range and attributes of the traffic information service between domestic public institutions and private companies, and suggests the possibility of joint application of node-link information for each company and the possibility of joint use of private traffic information. For this purpose, the present condition and attributes of domestic and foreign traffic information node-links (link length, node ID number, U-turn information, lane information, left turn information, right turn information, etc.) were analyzed. The analysis targets, the node-link of the national standard node and the two companies were analyzed. The area of the experiment was selected in Jongno-gu, Seoul, where standard-link information is complex, traffic volume is high, and various standard-links exist. The experiment was conducted by comparing and analyzing the traffic information attributes of three types of node-links and performing node-links overlapping matching (utilizing encoding_decoding method), and the possibility of matching node-links and attributes of different specifications was analyzed using Open LR technique.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.635-640
• /
• 2018

The study conducted a Focus Group Interview (FGI) on college students to identify single-person households and Solitary Deaths of single-person households recognized by college students. This can be provided as basic data to address problems in single-person households and social problems such as future youth solitary death and will contribute to building a social safety net. This study conducted FGI to analyze data for five fourth graders majoring in social welfare. In the case of involuntary independent living, the high poverty and unemployment rate of single-person households was cited as the cause of economic instability, housing problems and emotional relationship formation. He said that he thinks about young loneliness because he has vague fears about what happens in the media and what can happen to them. As the number of young single-person households will inevitably increase in the coming months and economic difficulties are the biggest problem and the biggest cause of young solitude, institutional support is needed first, especially for housing costs.

• Food Engineering Progress
• /
• v.23 no.2
• /
• pp.125-133
• /
• 2019

The characteristics of extracts and precipitates after extraction at different water temperature (25, 50, 75, 95℃), ethanol ratio (25, 50, 75, 100%), and extraction method (stir, soak, autoclave) of yam powder and raw yam were investigated. The total polyphenol content was the highest in the 50% ethanol extract of yam powder. The DPPH radical scavenging activity was the highest in the 75% ethanol extraction and the crude saponin content was the highest in the 95℃ water extraction. Tyrosinase inhibitory activity was the highest in 95℃ water extraction, low concentration of ethanol extraction, and autoclave extraction. The peak viscosity, trough, and final viscosity of the precipitates increased after ethanol extraction, whereas decreased after the 95℃ water extraction and the autoclave, indicating the destruction of starch granules. This was confirmed by observing the starch granules broken using the SEM. The significance of this study was to investigate the possibility of the use of yam resources as a material, processing product development, skin beauty functional food and cosmetic material.