• Tunnel and Underground Space
• /
• v.18 no.3
• /
• pp.185-193
• /
• 2008

We have carried out Pearson-type chi-square tests on the orientation data of joints from different depths in order to estimate the homogeneity of joint orientations obtained from a borehole. The orientation data of joints were collected from two non-foliated massive rocks of granitic gneisses in South Korea since orientations of joints in folded metamorphic rocks, for example, are controlled by foliation and also changes as the orientations of foliation change by folding. Borehole images were used for the analysis of the orientations of individual joints. The orientation data were subdivided into the upper level data and lower level data. The data from these two levels are plotted on the patch net consisting of 21 orientation patches. Then, the two patterns on the patch net were analyzed using a contingency table. From the chi-square test on the data collected from two sites, we found that some data sets show statistically meaningful differences in orientations of joints. Since joints are one of the important parameters in determining the physical properties of rock masses, in situ investigation of joints are desirable in the geotechnical investigation and also in design of subsurface structures (e.g. tunnels and underground storages).

• Korean Journal of Plant Taxonomy
• /
• v.40 no.3
• /
• pp.157-162
• /
• 2010

Sequences of the trnL/F intergenic spacer of chloroplast DNA were used to investigate the intraspecific evoution and phylogeography of Sedum takesimense (Crassulaceae). The trnL/F intergeneric spacer sequences from 32 individuals of S. takesimense were either 291 bp (17 samples "without indel" in the following) or 297 bp (15samples "with indel 1") in length due to an indel of 6 bp. Two main cpDNA haplotypes were detected within S. takesimense. The haplotype with indel was found on Ulleung Island and without indel on Ulleung Island and Dok Island. This confirmed the existence of two cpDNA lineages with different geographical distributions. The cpDNA sequence analysis also suggested a putative long-distance dispersal event between Ulleung Island and Dok Island.

• Journal of the Korean earth science society
• /
• v.29 no.3
• /
• pp.305-314
• /
• 2008

The purpose of this study is to analyze the concept of igneous rock textures and to uncover incorrect descriptions regarding the concept found within high school Earth Science II course seventh curriculum textbooks. Based upon this analysis suggestions will be made so as to improve descriptions regarding the concept of igneous rock texture. At least some incorrect descriptions regarding igneous rock texture were found in all the textbooks examined. Textures of volcanic rocks are described as being either fine-grained and glassy or porphyritic, while those of plutonic rocks are described as hollocrystalline, granular, coarse-grained or equigranular. These descriptions may contribute to forming and/or reinforcing misconceptions about both the classification criteria for, as well as the general concept of igneous rock textures. Therefore, some improvement schemes for the classification of igneous rock textures have been suggested. These schemes suggest that volcanic rocks be classified as either aphanitic or porphyritic, while plutonic rocks be classified as phaneritic, hollocrystalline or equigranular according to granularity, crystallinity, and both the absolute and relative sizes of the crystals within the rock.

• Economic and Environmental Geology
• /
• v.37 no.3
• /
• pp.269-276
• /
• 2004

The Indonesian Archipelago is located in the southern tip of the Eurasian plate. The diverse subduction system of the Indonesia region records interactions between three megaplates (Eurasian, Indian-Australian, and Pacific plates) and many smaller plates. The geology of Indonesian Archipelago is characterized by many factors such as subduction zone complexes, magmatic arc rocks associated with plate tectonics, the arc granite and volcanic rocks, and the related metamorphic rocks. The base-metal deposits of Indonesia have a great effect on petrochemical character of parent rocks and geotectonic environments. The base-metal deposits can be classified into four types as hosted by felsic-intermediate intrusive rocks, hosted by ultramafic rocks, hosted by volcanic rocks, and hosted by sedimentary rocks. The gold deposits are divided into three types: epithermal gold deposits, porphyry copper associated gold deposits, and alluvial gold deposits. Especially, Indonesian island uc, with its numerous plates tectonic, has an high potential for epithermal gold deposits. Indonesia with many old and present subduction zones and sub-aerial calcalkaline volcanic rocks is a very promising country for epithermal gold mineralization.

• Journal of Korean Elementary Science Education
• /
• v.24 no.3
• /
• pp.249-258
• /
• 2005

The purpose of this study was to identify the type of thinking and generating processes of causal questions which were generated in preservice elementary teachers' observing activities. To find the generating processes of causal questions, 4 observing tasks, the task of grapes in soda, the candlelight, the celery, and the rock tasks, were administered to 7 preservice elementary teachers majoring in science education. The results of this study were as follows: The types of thinking in generating explicans exploration questions were classified as 8 types and explicans verification questions were classified as 9 types. The generating processes of explicans exploration questions were classified as 6 steps and explicans verification questions were classified as 5 steps. The results of this study may be used as a teaching strategy for guiding the direction and the method of scientific questions and developing the teaching-teaming programs that help student to generate scientifc questions.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.124-127
• /
• 2010

본 연구에서는 통가 해역 라우분지의 열수 광상 가능성이 있는 해산들에 대하여 자력탐사가 수행되었다. 그 중 TA 09 해산에 대하여 심해견인 자력탐사가 실시되었으며 심해견인 자력탐사는 정밀한 탐사를 위하여 해저면에서 약 50 ~ 60 m 고도를 유지하며 자력계를 견인하였다. 탐사지역의 총 자력 성분은 Overhauser Proton Magnetomer (모델 SeaSPY 300(해상자력계)m, SeaSPY 6000(심해견인자력계))를 이용하여 측정되었다. 탐사 해산들 중 해상자력탐사와 심해자력탐사가 같이 수행된 TA 09 해산과 주요 열수 광상 유망 지역으로 분류되는 TA 12, 26 해산에 대해서만 측정된 지자기값을 이용하여 자기이상도를 구하였으며 자화역산법을 이용하여 자화이상도를 제작하고 분석하였다. TA 09 해산과 TA 26 해산에서의 해상 자기이상도는 쌍극자 이상형태의 단순이상을 보이며 TA 12 해산에서는 정상부에 고이상이 나타나고 그 주변으로는 저이상대가 분포하고 있다. TA 09 해산에서의 해상자력계에 의한 자기이상치와 심해견인자력계에 의한 자기이상치를 비교하여 보면 거의 10배 이상의 해상도 차이를 보여준다. 연구지역 탐사해산들의 해저지형과 비교하여 보면 열수분출대의 가능성이 높은 저자화이상대들은 주로 해산의 정상부 및 정상부 칼데라와 그 칼데라 주변부에 주로 위치하고 있는 모습을 나타내고 있다. 향후 타 탐사 해산들에 대한 자기이상에 대한 정밀처리/분석 후 탄성파 탐사결과, 암석샘플의 결과 및 지화학결과 등과 비교하여 열수광상의 존재 여부 및 위치 추정 분석이 필요할 것으로 판단된다.

• Journal of the Korean earth science society
• /
• v.29 no.7
• /
• pp.640-644
• /
• 2008

A type and origin of Buyeo and Jecheon mine as the domestic leading feldspar mines are classified by using the petrological characteristics. Jecheon mine is a weathered residual mine formed by the weathering of K-feldspar megacryst bearing porphyritic granite of which forming P-T is 840-5 Kb with the igneous origin of megacryst. On the other hand, Buyeo mine is made by the metasomatic alteration of hydrothermal solution from the biotite granite intrusion. Pure albite as a main ore mineral and garnet and sericite as accessaries are observed in this mine. In addition, the mine is typically characterized by the well recrystallized mineral texture.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.91-102
• /
• 2008

Nondestructive testing techniques have been historically and commonly used to evaluate the quality of existing concrete structures. The techniques utilized included visual inspection, hammer sounding, Schmidt hammer rebounding, and ultrasonic pulse velocity testing including tomographic imaging. Results of the nondestructive tests were used to determine areas to be tested with local destructive tests. These tests included concrete compressive strengths, chloride testing, and petrographic testing. The overall results indicate that inside core of each of the pier caps are healthy. On all of the pier caps, extensive exterior concrete layer rehabilitation needs to be completed. This paper shows the application and interpretation of common nondestructive testing techniques and the consequent repair, rehabilitation, maintenance decisions and safety assesment.

• Korean Journal of Remote Sensing
• /
• v.7 no.2
• /
• pp.131-147
• /
• 1991

Feature enhancement combined with some pattern recognition techiques were applied to the Remote Sensing Data for geological mapping with particular emphasis on non-me-tallic ore deposits and their related geologies. The area chosen is north of Ulsan, the size of which is about 400km$^2$. The geology of the area consists mainly of volcanics, volcanic sediments and clastic sediments of Miocene age, underlain by the Kyungsang sediments of Cretaceous age. The mineralization occurs in tuffs or along the bedding plane of tuffaceous sediments, the main products of which are Kaolinite and Bentonite. The outcrops or mine dumps in the study area were most effectively extracted on the histrogram normalized image of TM Band 1 and 2, due to their high reflectivity. These may be confused with some artificial features, like slate roof complex of the poultry farm or cement ground, which should be classified by field checking. Detailed examination of enhancment image combined with pattern recognition techniques made enable to classify different rocks and thereby extract volcanic products which are mainly related to non-metallic ore deposits in the study area.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.183-193
• /
• 2000

A series of studies such as geological logging data analysis, detailed geological survey, rock mass evaluation, in-situ and laboratory tests, rock strength and mechanical properties of the rock were concerned. The stability of the slope were carried out inorder to design the pit slope and individual benches using the stereographic projection analysis and numerical methods in Roto Pit of Pasir coal fetid. The bedding plane was one of the major discontinuities in the Roto Pit and the dip of which is about $60^{\circ}$in the northern part and $83^{\circ}$in the southern part. The dip of bedding becomes steeper from north to south. The plane and toppling failures are presented in many slopes. In laboratory test the average uniaxial compressive strength of mudstone was 9 MPa and that of weak sandstone was 10 MPa. In-situ test showed that the rocks of Roto north mining area are mostly weak enough to be classified in grade from R2(weak) to R3(medium strong weak) and the coal is classified in grades from R1(Very weak) to R2(Weak). The detailed stability analysis were carried out on 4 areas of Roto north(east, west, south and north), and 2 areas of Roto south(east and west). In this paper, the minimum factor of safety was set to 1.2 which is a general criterion for open pit mines. Using the stereographic projection analysis and the limit equilibrium method, slope angles were calculated as 30~$36^{\circ}$for a factor of safety greater than 1.2. Then these results were re-evaluated by numerical analysis using FLAC. The final slope angles were determined by rational described abode. A final slope of 34 degrees can guarantee the stability for the eastern part of the Roto north area, 33 degrees for the western part, 35 degrees for the northern part and 35 degrees for the southern part. For the Roto south area, 36 degrees was suggested for both sides of the pit. Once the pit slope is designed based on the stability analysis and the safety measures. the stability of 니ope should be checked periodically during the mining operations. Because the slope face will be exposed long time to the rain fall, a study such aspreventive measures against weathering and erosion is highly recommended to be implemented.