• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.53-58
• /
• 2014

The uniaxial compressive strength and Young's modulus of intact rocks are the most important analytical parameters for design of rock mass structures. But the preparation of the samples for uniaxial compressive test is a hard and time consuming task. By using ultrasonic test, engineers can predict the analytical parameters that is the uniaxial compressive strength and Young's modulus. The uniaxial compressive test and ultrasonic test were carried out 115 samples of igneous rocks, 74 samples of metamorphic rocks and 55 samples of sedimentary rocks and, after regression analysis of the test results, best fit equations for predicting the uniaxial compressive strength and Young's modulus are proposed. In order to obtain a better correlations coefficient between uniaxial compressive strength and P-wave velocity, the P-wave velocity were multiplied by density values. The proposed equations for predicting uniaxial compressive strength and Young's modulus using ultrasonic test provide reliable results.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.3_4
• /
• pp.250-258
• /
• 2002

The wavy extinction of quartz can be used as a standard indicator showing the degree of rock deformation. To determine the degree of rock deformation, the intensity of wavy extinction (IWE) of quartz was measured using petroggraphic microscope, digital camera, and NIH image. In this study, this method was applied to the Cheongsan porphyritic granite, Cheongsan two mica granite, and Baekrok granite to investigate the deformation intensity of Cheongsan area. NIH Image data show a high-grade deformation in the vicinity of the strike-slip fault (between Cheongsan granite and Baekrok granite) and the unconformity (between Cheongsan granite and Youngdong basin). Thus, the main deformation in these areas is most likely to be concentrated on the faults that generate Yeongdong basin and the strike slip faults between Cheongsan granite and Baekrok granite.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.514-519
• /
• 2003

치수효과는 콘크리트나 암석과 같은 quasi-brittle 재료들의 물리적 특성에 영향을 미친다. 모든 재료의 경우에 체적이 크면 흠이 클 수 있다. 구조물의 섬유 묶음 크기가 증가하면, 섬 유 강도가 감소하는 현상을 흔히 경험해 왔다. 복합재료내의 강도 분배와 치수사이의 관계를 특성 짓는 효과적인 방법은 아직 완전하지 않다. 본 논문에서는 경험에서 얻어진 Filament Wound 튜브에 사용되는 유리 섬유와 에폭시의 인장강도 감소비율 실험데이터로 얻은 그래프로부터 Crasto와 Kim의 일방향 보강된 AS4/3501-6복합재료의 90$^{\circ}$방향 인장강도에 대한 실험결과로부터 복합재료 봉구조재의 강도 치수효과를 증명하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.3
• /
• pp.205-217
• /
• 2006

Rock and discontinuities are main factors consisting of a rock mass and the physical properties of each factor have direct effects on the mechanical stability of artificial structures in the rock mass. Because physical properties of the rock and discontinuities change a lot according to the size of test materials, a close attention is needed when the physical properties, obtained from laboratory tests, are used for the design of field structures. In this study, change of physical properties of intact materials due to the change of their size are studied. Six kinds of artificial materials including crystal, instead of an intact rock, are adopted for the study to guarantee the homogeneity of specimen materials even with relatively large size. Uniaxial strength and Young's modulus of each artificial material are checked out for a size effect and compared with the predicted values by Buckingham's theorem - dimensional analysis. A numerical analysis using PFC (Particle Flow Code) is also applied and primary factors influencing on the size effect are investigated.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.3
• /
• pp.21-36
• /
• 2011

Rock Weathering is a basic of geomorphological evolution as a preparation of materials. Of those, frost shattering has traditionally been considered as the operative process causing rock breakdown in cold regions as well as temperate zone. Each Granite(fresh rock, semi-weathered), Gneiss, Limestone, Dolomite was prepared slab specimens in ten, repeated freeze-thaw cycles of 180 under the -25℃~+30℃, and the changes was observed in physical properties and weathering aspect. Rock shattering was more active in waterlogging conditions rather than atmospheric and soil conditions. Limestone and Dolomite that high porosity are most severely crushed. Gneiss, regardless surface of the crack, joint, fissure and has a lowest rock strength(SHV), was even though no physical changes and their weathering product do not generate, has a very high resistance to weathering.

• The Journal of the Petrological Society of Korea
• /
• v.12 no.3
• /
• pp.101-109
• /
• 2003

The wavy extinction of quartz can be used as a standard indicator showing the degree of rock deformation. In determine the degree of rock deformation, the intensity of wavy extinction (IWE) of quartz was measured using polarizing microscope, digital camera, and NIH Image program. This method was applied to the granite of Pocheon-Gisanri area, which are divided three type; biotite granite (Gb), garnet biotite granite (Ggb) and two mica granite (Gtm). In this study, measurement of wavy extinction was proceeded Ggb in eastern part and Gb in western part based on the Pocheoneup. The result was that Gb shows low deformation degree below D2, and Ggb represents high deformation degree above D3, generally showing that increasing deformation degree from northwest to southeast in the studied area. It is suggested that the fault which penetrated Ggb in 1/250,000 geological map affected the deformation degree of Ggb.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.449-456
• /
• 2013

This study was carried out to assess the suitability in terms of the standards of material quality of basalt aggregates from JEJU Island as a source for concrete aggregate. Quality assessments on the basalt aggregates were performed to assess the soundness of coarse aggregates using sodium sulfate solution, aggregate crushing test, and Los Angeles abrasion test. In addition, XRD, XRF, porosity, and compressive and tensile strength tests were performed to analyze the chemical components and the mechanical properties. In general, the mechanical properties of basalt aggregates from some areas did not meet the Korea Standards (KS), but the levels of compressive and tensile strength were higher than those of granite, andesite, and sandstone of other regions.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2007.03a
• /
• pp.178-191
• /
• 2007

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2002.05a
• /
• pp.34-34
• /
• 2002

• Journal of the Korean Geotechnical Society
• /
• v.30 no.7
• /
• pp.41-53
• /
• 2014

This study examined the magnitude and distribution of the earth pressure on the support system in a jointed rock mass by considering different joint shear strength, rock type, and joint inclination angle. The study particularly focused on the effect of joint cohesive strength for a certain condition. Based on a physical model test (Son and Park, 2014), extended parametric studies were conducted considering rock-structure interactions based on the discrete element method, which can consider the rock and joint characteristics of rock mass. The results showed the earth pressure was strongly affected by the joint cohesive strength as well as the rock type and joint inclination angle. The study indicated that the effect of joint cohesive strength was particularly significant when a rock mass was under the condition of joint sliding. This paper investigates the magnitude of joint cohesive strength to prevent a joint sliding for each different condition. The test results were also compared with Peck's earth pressure, which has been frequently used for soil ground. The comparison indicated that the earth pressure in a jointed rock mass can be significantly different from that in soil ground. This study is expected to provide a better understanding of the earth pressure on the support system in a jointed rock mass.