• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.241-247
• /
• 2001

절리가 발달한 암반사면의 경우, 토사사면의 안전율 평가를 위해 널리 이용되는 한계평형법을 이용한 해석법은 파괴 활동면을 가장할 수 없기 때문에 사용이 곤란하다. 한편, 비등방 탄소성 모델(편재절리모델)을 사용하여 2조의 절리군을 가진 암반사면의 안전율을 계산할 수 있는 방법이 개발되었지만, 이 방법은 개별절리를 효과적으로 고려하지 못한다. 본 연구에서는 개별절리를 고려한 불연속체 해석에 의한 암반사면의 안정성 해석시 사면의 안전율을 평가하는 기법을 개발하였다. 이를 위해, 절리 전단강도 감소기법을 적용하였으며, UEDC의 내장 언어인 FISH를 사용하여 프로그램을 개발하였다. 또한 실제 절리 암반사면을 대상으로 절리를 측정하고, 개발된 기법에 의한 사면의 안전율을 구하였으며, 동일한 사면에 대해 등가연속체로 가정한 편재절리모델 해석을 수행하여 결과를 비교하였다.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.1-12
• /
• 1996

To design the safe and rational rock slope, several rock slopes of roads in Kang-won area were analyzed, and the following results were obtained ; 1. The results were analyzed by stereographic projection at the rock slope that the joint was developed. All of the sloped which were designed by standard slope of rock was not considered that the joints were unstable. 2. The relation of rainfall and slope failure, as well as the danger of failure, was very high when the maximum hourly rainfall was larger than 20mm and when there was a 2-day cumulative rainfall that was larger than 200mm. 3. In the design of rock slope, operated by the stereographic projection considering discontinuity. If turn out unstable, it should be analyzed carefully using the limit equilibrium method. 4. In the design of rock slope, it is desirable to consider the discontinuity of rock(joint, bedding, fault).

• Tunnel and Underground Space
• /
• v.17 no.4
• /
• pp.322-331
• /
• 2007

Hundreds of rock slopes are constructed along the road, highway and railroad in mountainous Kangwon province and managed by each authorities concerned. It is practically not possible to carry out detailed rock slope investigation owing to the tremendous number of slopes and budgetary limit. Therefore, it is reasonable to perform a step-by-step investigation consisted of basic and detailed survey program and practical rock slope hazard assesment method for person in charge is strongly required. Through the development and application of KSMR (Korean Slope Mass Rating), it was found that KSMR could be practically used as an alternative of SMR though the number of inputs were reduced. In addition, the difference of hazard assessment between KSMR and experts decreased in case of considering the height of slope.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.3-16
• /
• 1999

This paper presents the results of sensitivity analysis based on an example study to verify a newly developed reliability-based model for rock slopes considering uncertainties of discontinuities and failure modes-plane, wedge, and toppling. The parameters that are needed for sensitivity analysis are the variability of discontinuity properties (orientation and strength of discontinuities), the loading conditions, and the rock slope geometry. The variability in orientation and friction angle of discontinuities, which can not be considered in the deterministic analysis, has a great influence on the rock slope stability, The stability of rock slopes including failure modes is more influenced by the selection of dip direction of cutting rock face than any other design variables, The example study shows that the developed reliability-based analysis model can reasonably assess the stability of rock slope.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.61-69
• /
• 2008

In general, it has been usually used the method that assess rock slope stability using stereographic projection method, limit equilibrium analysis, numerical analysis and slope stability evaluation table. Several methods for assessing the stability of rock slopes has been proposed on the basis of site investigation data. These method adopted different evaluation items and weighting factors by researchers, organization and nation. But the researches for each evaluation items were insufficient. So the effectiveness of rock slope stability evaluation items for geometrical configuration (slope height, slope direction and angle, dip and dip direction of major discontinuity, absolute value for the direction difference for slope and major discontinuities) and topographical characteristic (possibility of topographical water concentration, upper natural slope angle, slope configuration) using 315 failure and stable highway rock slope analysis data, AV (abnormal value) analysis and NMAV (normalized maximum abnormal value) analysis were evaluated.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1996.03a
• /
• pp.55-72
• /
• 1996

암반사면의 안정성은 암반내에 발달된 불연속면의 기하학적 속성과 강도정수에 크게 영향을 받으며, 사면방향에 대한 불연속면들의 상대적인 방향성들은 구조적으로 발생 가능한 붕괴양상을 결정하게 된다. 불연속면을 따라 미끄러짐이 발생하는 암반사면의 불안정성 분석에는 결정론적인 해석(deterministic analysis)과 확률론적인 해석(probabilistic analysis)들을 포함하여 수많은 방법들이 이용되고 있다. (중략)

• Tunnel and Underground Space
• /
• v.19 no.2
• /
• pp.95-106
• /
• 2009

Numerical analysis of the progressive failure of a rock slope was conducted using a 3-D rock joint element considering fracture mechanics and subcritical crack growth of asperities in the rock joints. Even though the stress state in the rock slope is not changing, the elapse of time causes subcritical crack growth to break asperities in the joints. The increase of broken asperities causes failure of joints in the rock slope and the increase of failed joints results in failure of a jointed rock slope. As a result, the progressive failure of a jointed rock slope due to the gradual breaking of small asperities along joints generated by subcritical crack growth occurs at a lower stress than if rock failure occurred by exceeding the static strength or fracture toughness.

• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.295-303
• /
• 2002

The stability of rock slopes is closely related to the factors such as: type of rock, development of geological structures, weathering, characteristics of rock, and the shape of the geological features. When we design the rock slope, the slope stability is determined by the discontinuity causing the circular, plane or wedge failure. The failure happens when the slope is under the unstable geological condition. But in some cases, slope failure has occurred even though the slope is under stable geological conditions. In this respect, this paper presents the plane failure conditions for domestic rock slopes through research of sites where slope failure has occurred regardless of whether or not it satisfied the stable geological conditions.

• The Journal of Engineering Geology
• /
• v.13 no.4
• /
• pp.491-496
• /
• 2003

본 기술은 암반사면 보강공법에서 철근보강재인 네일(Nail)에 원추형콘(철근 규격에 따라 기울기 $19~23^{\circ}$, 높이 40~45mm, 아랫변 65~70mm)을 일정한 간격으로 다수 장착하여 그라우트재와 원 지반까지 방사입체형으로 힘을 미치게 하는 암반사면 보강공법이다. 본 신기술 공법은 네일링 공사 시 원추형 콘을 장착, 삽입함으로서 부착력과 인발력을 증가시켜 비탈면 보강공사 시에 안전성을 높인 공법이다. 따라서 네일링공법을 사면붕괴 방지공사에 적극 활용할 수 있으므로 네일링 공법의 사용을 활성화 하며, 지진이나 지반변형 등 외력에 의한 사면붕괴를 사전에 방지할 수 있어 사면재해를 미연에 방지하는 효과가 있다. 또한 현재가지 네일링공법은 인발톤수가 적고 네일에 대한 신빙성 결여로 아주 적은 인발톤수를 필요로 하는 현장이외에는 사용을 기피하는 일이 많았다. 그러나 본 원추형 콘네일 공법은 어스앙카, 록앵커, 보강토공법, 지지말뚝공법, 옹벽 등에 대한 대체공법으로 이용할 수 있는 여건이 충족됨으로 사면보강재로서의 사용 확산이 기대된다.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.569-583
• /
• 2018

The purpose of this study is to identify the collapse characteristics by analyzing various factors causing collapse based on field survey and existing data on rock slopes occurring in the construction of roads and industrial complexes in Gyeongsangnam - do area. In the case of the slope where the slope has been directly surveyed, the analysis of the collapse characteristics can be used for the prediction and prevention of slope failure through the continuous collection of the slope data, database construction, management and analysis. The evaluation items used in the collapse characteristics of slope were selected among the items that can be regarded as objective evaluation items among the overlapping factors by comparing the evaluation items frequently used for the evaluation of the existing slope stability among various factors. The type of destruction of the rock slope depends on the type of carcass of the bedrock, such as planar fracture, wedge fracture, onho fracture, and conduction fracture, which are different from each other. And the slope stability analysis should be performed accordingly.