• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.145-149
• /
• 2006

The effect of alkaline environmental condition on durability of GFRP composites according to additives has been investigated. Additives used were polyvinyl alcohol (PVA), kaolin and alumina powder. Weight gains increased with immersion time in all GFRP composites at $80^{\circ}C$. But weight gain of specimen added PVA did not differ through the whole immersion time in both tap water and alkaline solution at 20 and $80^{\circ}C$. Tensile strength decreased with immersion time in all environment conditions. Tensile strength of GFRP composites regardless of additives decreased rapidly up to 5 days of immersion and then decreased slowly up to 30 days in alkaline solution environment at $80^{\circ}C$. The weight gains were not much difference in both tap water and alkaline solution at $20^{\circ}C$. But the ones of GFRP composites added PVA was smaller than the composites without additive in all aqueous at $20^{\circ}C$. Test strength of GFRP composites added polyvinyl alcohol has improved through the whole immersion time in both tap water and alkaline solution environment at $20^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.310-316
• /
• 1987

A field experiment was conducted to find out the effects of liming(soil pH) and sources of N on growing characters and yield of burley tobacco. Treatments consisted of liming(nonliming, liming to soil pH5.5 and 6.5) as the main plot and N sources(compound fertilizer of containing 3.9% NH$_4$-N and 6.1% NH$_2$-N, NaNO$_3$,(NH$_2$)$_2$CO and (NH$_4$)$_2$SO$_4$as the sub-plot. The growth of vegetative growing stage of limed plots were delayed(to compare the nonlimed plot) by influence of alkali. When the source on N was NaNO$_3$ the growth of vegetative growing stage was unfavorable and the yellowing of lower leaves of maturing stage was rapid. The yield and value of cured leaf was increased by increasing the rate of Ca(OH)$_2$, but there was no significant differences among the source of N. The yield response to liming was greater when the source of N was (NH$_4$)$_2$SO$_4$ than that of any other plots.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 1996.12a
• /
• pp.75-75
• /
• 1996

최근 가장 관심이 집중되고 있는 음용수중의 미량오염물질로는 인위적으로 첨가되는 소독제(disi octant)로 인한 소독부산물(disinfection by-products: DBPs)을 들 수 있다. 1970년대부터 염소소독시 수중의 유기오염물길과 반응하여 발암성물질 과 돌연변이 물질이 다수 함유되어 있는 클로로포름(chloform)을 포함한 트리할로메탄(Trih리omethane: THMs)의 생성이 발견되었으며 이로 인한 건강상의 영향이 지속적으로 보고되고 있다. 염소소독시 780가지 이상의 화합물이 염소와 휴믹산(humic acids)과의 반응에 의해 생성되며, 이중 대부분이 할로겐 화합물로 알려져 있다. 염소 소독부산물로는 인체발암력을 지니고 있는 트리할로메탄(THMs) 이외에도 할로아세틱산(Haloaceticacids: HAAs), 할로아세토나이트릴(Haloacetbnitriles: HANs)등이 주 생성물질인 것으로 알려져 있으나 우러나라의 원수특성에 따른 소독부산물의 생성능 (Formation potential)에 대한 연구가 미흡한 실정이다. 본 연구에서는 우리나라 주요 4대강(한강, 대청호, 영산강, 낙동강)의 원수를 실험실내에서 염소처리하여 생성되는 소독부산물의 생성농과 pH, 체류시간 등의 조건에 따라 생성능을 조사하였다. 각 화합물은 추출 및 농축과정을 거친 후 GC/MSD를 사용하여 물질을 확인한 후 할로겐화합물에 민감한 GC/ECD를 사용하여 시료를 분석하였다. pH와 시간, 원수중의 유기물 함량이 소독부산물의 생성에 많은 영향을 미치는 것으로 나타났다. THMs은 알칼리에서, HAAs의 경우는 약산성에서 접촉시간이 증가할수록 높은 생성능을 보였고, HANs의 경우는 급속히 생성했다가 시간이 경과함에 따라 소멸하며 약산성에서 높은 생성능을 보임을 알 수 있었다, 강별로는 낙동강에서 THMs파 HANs의 생성능이 비교적 높았고, 영산강에서는 HAAs의 생성능이 높았다. 각 원수의 특성에 따른 생성능을 파악함으로써 생성능 저감방안을 마련하며, 소독 부산물질의 인체노출평가에 따른 위해성평가를 통해 관리기준을 설정해야 할 것이다.

• Applied Chemistry for Engineering
• /
• v.3 no.4
• /
• pp.710-716
• /
• 1992

Ethylphenyl carbarmate(EPC) was synthesized by oxidative CO carbonylation of aniline in the presence of transition metal catalysts and alkali metal halide cocatalysts at $120^{\circ}C$ under the pressure of 79atm. Oxygen gas was used for oxidizing agent. Kinetics of the reaction was studied and activation energies with different catalysts were estimated. About 100% conversion to EPC and 95% selectivity was obtained in 5 hour reaction. 5% Pd/C was more effective than 5% Rh/C. Effectiveness of cocatalysts was in the order of KI>KBr>KCl. As the temperature increased from $75^{\circ}C$ to $120^{\circ}C$, the conversion rate increased. The reaction was apparent first order and the activation energies with 5% Pd/C and 5% Rh/C were 5.647 and 5.780 kcal/mol, respectively.

• Applied Biological Chemistry
• /
• v.49 no.4
• /
• pp.304-308
• /
• 2006

To extract insoluble proteins from silkworm pupa meal, the meal was treated with pretense produced by Bacillus sp. JH-209. The extraction of insoluble silkworm pupa protein was enhanced at alkaline pHs ranged from 7 to 11 by treatment with the protease. The optimum extraction temperature was $40^{\circ}C$ for in soluble protein treated with pretense. The optimum protease treatment time for extraction of protein was 11 hrs and optimum amount of enzyme treated for extraction of protein was 60 Unit, respectively. The treatment of enzyme extracted more protein than ordinary extraction method without pretense. The foaming capacity, foaming stability, emulsion capacity, and emulsion stability of silkworm pupa meal protein extracted by the treatment of the enzymes increased at all pH ranges. Further more oil absorption as well as water absorption capacities of the protein extracted by the treatment of the enzymes were also increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.2 s.24
• /
• pp.101-112
• /
• 1987

The purpose of this study is to investigate the influence of addition of sodium dodecyl sulfate(SDS) when wool is treated with sodium hydroxide(NaOH). Physical and chemical changes were examined on wool treated with various cone. of NaOH and SDS simultaneously. The result are as follows. 1. The higher the temperature and the longer the time of NaOH treatment are, the more alkali damage wool get : increase in weight loss and decrease in urea-bisalphite solubility and in tensile strength. But the treatment time reacts less effective than the temperature. 2. When wool is treated with NaOH, at NaOH cone. under $10^{-3}M$., the addition of SDS alleviates the alkali reaction on wool: increase in cystine contents and in urea-bisulpite solubility, and decrease in degree of swelling. On the other hand, at NaOH cone. over $10^{-2}M$., the addition of SDS promotes the alkali reaction on the wool. 3. When wool is treated with NaOH, the addition of SDS shows no changes on the tensile strength. On the other hand, at NaOH cone. under $10^{-2}M$., the addition of SDS shows no changes on the softness of wool, but at the $10^{-1}M$. NaOH cone. addition of SDS increases the soft-ness of wool. The area shrinkage of wool treated with NaOH and SDS shows less changes than with NaOH only.

• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.708-715
• /
• 1995

Effect of enzymatic modification with pepsin, papain and trypsin was studied on functional properties of isolated sesame meal protein hydrolysates. Solubility of protein hydrolysates distinctively increased from 2% to $53{\sim}94%$ at pH 4. Emulsifying properties showed marked increase 6 fold and 4.5 fold at degree of 10%, 20% hydrolysis by trypsin and degree of 10% hydrolysis by papain. The emulsion stability of the protein was unstable by heat treatment for 30 min. at $80^{\circ}C$. Foaming properties were also enhanced by enzymatic hydrolysis except at degree of 30% hydrolysis. Bulk density and water absorption of protein with trypsin and papain decreased about 0.1 g/ml and $0.3{\sim}0.7\;ml/g$, but oil absorption was increased about 1 ml/g.

• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.494-501
• /
• 2004

A new alkali developable photosensitive poly(amic acid) (PAA-0) with transmittance at 400 nm was synthesized from cyclobutane-1,2,3,4-tetracarboxylic dianhydride, 2-(methacryloyloxy)ethyl-3,5-diamino-benzoate and 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyl disiloxane in N-methyl-2-pyrrolidinone. Photosensitivity of the PAA-0 was investigated at 365-400 nm in the presence of a photoinitiator using a high pressure mercury lamp. The photo-cured poly(amic acid) was insoluble toward aqueous 2.38 wt% tetramethylammonium hydroxide solution. Negative pattern of the PAA-0 with 25 ${\mu}{\textrm}{m}$ resolution was obtained by developing with 2.38 wt% tetramethylammonium hydroxide solution after exposure of 600 mJ/$\textrm{cm}^2$ in the presence of 2,2-dimethoxy-2-phenyl-acetophenone as a photoinitiator. The patterned poly(amic acid) was converted to polyimide by thermal curing at 25$0^{\circ}C$ for 50 min, which showed chemical resistance against photoresist stripper as well as good transmittance at 400 nm.

• Resources Recycling
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2003

A study on the separation of heavy metals such as iron, copper, zinc and nickel from electroplating waste water has been investigated. The results showed that the PC-88A was more effective extractant for the extraction of zinc and the efficiency of zinc was to be about 100% at pH 2.5. And copper and nickel were extracted about 100% at pH 2 and more than 90% at pH 4～5 with LIX 84, respectively. On the other hand, in the case of solvent extraction of electroplating waste water(Acid-Alkali type) containing heavy metals, the ferric ion was first extracted at pH 2∼2.5 with 20% Naphthenic acid or 10% Versatic acid-10. And then, copper and zinc were extracted at pH 2 with 3% LIX 84 and at pH 2.5∼3 with 20% PC-88A respectively, remaining nickel in the raffinate. In this manner, the heavy metals in electroplating waste water could be effectively separated with solvent extraction method.

• Resources Recycling
• /
• v.17 no.3
• /
• pp.3-9
• /
• 2008

The measurement of physicochemical properties and chemical composition of SSA(sewage sludge ash) has been carried out and the preparation of lightweight material has also been performed using SSA for reuse as building or construction materials. For this aim, lightweight material has been prepared by forming the mixture of SSA, lightweight filler and inorganic binder followed by calcination at elevated temperature and characterized in terms of density and compressive strength. The pH of fly ash was found to be slightly alkaline, pH 8.69, due to the addition of caustic soda in order to neutralize the acidic gas while the pH of bottom ash was 6.48 Heavy metal leachability based on the standard leach test was also found to be below the detection limit for Cd, Cu, Pb, As and Cr of SSA. As far as the compressive strength of lightweight material was concerned, the compressive strength of lightweight material using fly ash was higher than that of lightweight material using bottom ash.