• Journal of the Korean Wood Science and Technology
• /
• v.12 no.4
• /
• pp.36-46
• /
• 1984

In order to investigate the inhibitory index (I) and the effects of hot water extraction treatments and addition of accelerators on the index in hardening of Korean lignocellulosics, portland cement (Type I) and water system, hydration tests were carried out on 8 Korean lignocellulosics, namely, Pinus densiflora, Pinus rigida, Pinus koraiensis, Abies holophylla, Larix leptoiepis, Populus alba-glandulosa, rice husk and rice stalk with or without hot water extraction or chemical additives. The inhibitory index of Pinus densiflora and Pinus rigida found to be suitable under limited conditions for composite without any treatment. With hot water treatment rice husk, Pinus koraiensis, Larix leptolepis, and A hies holophylla were reclassified from not suitable to suitable under limited conditions. Combining hot water extraction with chemical addition of accelerator, calcium chloride of magnesium chloride, Populus alba-glandulosa, Larix leptolepis, and Pinus rigida became highly suitable.

• Journal of Power System Engineering
• /
• v.11 no.1
• /
• pp.76-81
• /
• 2007

The objective of this study is to find the optimum design of a snubber using CFD analysis. Several dimensions such as snubber height(H), snubber diameter(D), buffer width and buffer angle are considered in this study. The present study shows that the CFD can be applied to study the pressure characteristics inside the snubber. The objective of the snubber design optimization are to minimize a pressure loss and the pulsation ratio. Numerical results such as particle track, pressure distribution and turbulent kinetic energy are used to analyze the critical area and pressure behavior inside the snubber. As a result, snubber model with H/D ratio of 3.23 and buffer angle of $40^{\circ}$ has a minimum pressure loss. On the other hand, snubber model with H/D ratio 4.41 and buffer angle $10^{\circ}$ has a minimum pulsation ratio.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.198-200
• /
• 2018

In this paper a single-stage single-phase differential type isolated AC-DC converter is proposed. This converter eliminates the requirement to use bulky electrolytic capacitor from the system and at the same time provides DC charging by employing the AC Power Decoupling waveform control method. All the switches of the converter achieve ZVS turn on during half line cycle and all diodes achieve ZCS turn off during entire line cycle. A conventional controller is implemented for PFC control and output regulation, whereas a power decoupling controller is added to compensate $2^{nd}$ harmonic ripple power. In addition, an interleaving technique is applied to increase the power range of the converter and reduce the input inductor size. In the end simulation verification is performed and results are obtained for 6.6KW.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.3
• /
• pp.66-71
• /
• 2019

In shape from focus (SFF) methods, the quality of image focus volume plays a vital role in the quality of 3D shape reconstruction. Traditionally, a linear 2D filter is applied to each slice of the image focus volume to rectify the noisy focus measurements. However, this approach is problematic because it also modifies the accurate focus measurements that should ideally remain intact. Therefore, in this paper, we propose to enhance the focus volume adaptively by applying 3-dimensional weighted least squares (3D-WLS) based regularization. We estimate regularization weights from the guidance volume extracted from the image sequences. To solve 3D-WLS optimization problem efficiently, we apply a technique to solve a series of 1D linear sub-problems. Experiments conducted on synthetic and real image sequences demonstrate that the proposed method effectively enhances the image focus volume, ultimately improving the quality of reconstructed shape.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.608-613
• /
• 2019

The purpose of the present study is to analyze and evaluate the performance of a small Darrieus wind turbine installed at the Urumsil region of Deokjeok-do Island in the west of South Korea 50 km away from Incheon. This place has no government electricity so alternate resources of energy needed to be installed there. For this purpose a small Darrieus wind turbine with the capacity of 1.5 kW was developed and installed at the site. The experimental power output of the wind turbine is less than the designed power at the same values of wind speed. This power loss is mainly due to the highly unsteady nature wind of sudden changes in magnitude of wind speed and wind angle. The results of current study can be used to make a future power generation plan for Deokjeok-do and other nearby small islands.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.460-460
• /
• 2010

단결정 수정은 높은 자외선(UV) 투과성, 화학정 내성, 압전성 등의 특성을 가지고 있으며, 이로 인해 UV 나노임프린트 리소그래피의 스탬프, 광학 리소그래피의 마스크, MEMS 능동소자 등의 다양한 분야에 응용되고 있다. 단결정 수정의 응용분야를 넓히기 위해서 수정과 수정을 접합하는 것은 매우 유용하다. 수정과 수정의 접합은 무결정 유리, 금속등의 중간층을 이용한 접합이 소개되었으나, 접합 시 접합 계면의 평평도가 낮아 지거나, 중간 금속층의 내화학성이 낮은 단점이 있다[1,2]. 이를 극복하기 위해 중간층을 사용하지 않고, 습식 화학적 에칭을 통한 수정-수정의 직접 접합 방법이 소개되었다[3]. 이 방법은 UV 투과성과 내화학성이 높은 접합을 형성할 수 있으나 500도씨 이상의 고온의 어닐링이 필요한 단점이 있다. 본 연구에서는 플라즈마를 이용하여 저온(200도씨)에서 수정-수정의 직접 접합을 형성하였다. 플라즈마 처리를 통해 수정-수정 직접 접합의 접합 강도가 향상되는 것을 확인하였다. 플라즈마 시간과 수정의 표면 거칠기가 접합 강도에 미치는 영향을 분석하였다. 이 방법을 이용하여 나노 임프린트 리소그래피용 스탬프를 제작하였으며, 성공적으로 나노임프린트를 수행하였다. 이 방법은 MEMS 능동 소자 제작, UV 나노임프린트 리소그래피 스탬프 등 다층 수정구조 제작에 등에 응용될 것으로 기대된다.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.65-79
• /
• 2015

This study intended to investigate exploratorily the precedent factors affecting two types of perceived balances between work and life(family/leisure) and the antecedent ones affected by them, focusing on the metro train drivers. To attain this purpose, literature survey on the precedent factors, work-life balance, and antecedent factors was performed, and the study model was designed based on this survey, and then this model was analyzed empirically using Multiple-Regression. The results on the precedent factors showed that Job Demand, Self-Efficacy, and Age have significant effects on the negative transfer of work. On the other hand, it was shown that Affiliative Culture, Self-Efficacy, and Internal Locus of Control have significant effects on the family centered balance. And the results on the antecedent factors showed that family centered balance has significant effects on Job Satisfaction, Psychological Depression and Fatigue, Safety Behavior, and accident, and the negative transfer of work has significant effects on Physical and Psychological Depression and Fatigue, Emergency Stress, and Safety Behavior.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.470-471
• /
• 2013

Accuracy of mappings is the key for achieving true interoperability among different healthcare systems. The initial step towards interoperable healthcare systems is compliancy with healthcare standards (HL7, openEHR, CEN 13606). Ontologies for these standards are developed that require ontology matching to generate generalized ontology mappings. Organizations conform to specific concepts of different standards based on their requirements. This step is called as conformance claims and is based on Personalized-Detailed Clinical Model. It invalidates some of the generalized mappings because of non-conformed concepts and leads to the necessity of the proposed technique of customized ontology mappings. These customized ontology mappings compliment the generalized ontology mapping to increase the level of accuracy of mappings and thus achieving data interoperability. The proposed system ensures quality of care to patients by timely delivery of healthcare information.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.437-443
• /
• 2021

In this study, the use of a steel yielding damper is considered as an appropriate method to enhance the behavior of CBFs and a steel damper which is economical and straightforward to construct and replace after a severe earthquake is developed. The proposed damper was investigated experimentally and numerically. In addition, a parametric study was performed to evaluate the effect of the three types of damper mechanisms (shear, shear-flexural, and flexural) on the behavior of the proposed damper. The experimental results, as well as the numerical results, indicate that the shear damper exhibits better performance than the other dampers in terms of strength and stiffness.

• Journal of the Korean Society of Visualization
• /
• v.20 no.3
• /
• pp.19-26
• /
• 2022

In droplet microfluidics, precise droplet manipulation is required in numerous applications. This study presents ultrasonic surface acoustic wave (USAW)-based microfluidic device for label-free droplet separation based on size. The proposed device is composed of a slanted-finger interdigital transducer on a piezoelectric substrate and a polydimethylsiloxane microchannel placed on the substrate. The microchannel is aligned in the cross-type configuration where the USAWs propagate in a perpendicular direction to the flow in the microchannel. When droplets are exposed to an acoustic field, they experience the USAW-induced acoustic radiation force (ARF), whose magnitude varies depending on the droplet size. We modeled the USAW-induced ARF based on ray acoustics and conducted a series of experiments to separate different-sized droplets. We found that the experimental results were in good agreement with the theoretical estimation. We believe that the proposed method will serve as a promising tool for size-based droplet separation in a label-free manner.