• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.223-226
• /
• 2002

본 논문에서는 기존의 MSA의 구조를 변형하여 S자형 변형된 MSA를 제안했다. 제안된 안테나는 전기력선 형성에 제한 반지 않도록 방사패치와 접지면을 접어 올린 우측 평행 평판사이 용량을 장하하고, 방사패치를 접어내린 좌측 평행 평판과 접지면 사이 용량을 장하한 구조로 설계 제작하였다. 설계된 안테나는 2.24GHz의 중심 주파수에서 5.7%의 대역폭을 갖고 임의의 급전점의 위치변화에 따라 대역폭과 공진 주파수의 변화를 비교하고, 용량 장하의 크기에 따라 대역폭과 통진 주파수론 비교하였다. 또한 제작된 안테나의 방사 패턴 특성은 E면과 H면의 수직·수평 편파의 특성을 측정하여 비교하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.475-476
• /
• 2015

In this paper, we introduce a novel feeding method for a broadband planar quasi-Yagi antenna (QYA) for terrestrial digital television (DTV) receiving. The balun between the balanced coplanar strip (CPS) line feeding the driver dipole and the unblanaced microstrip line is a rectangular patch inserted into the CPS line along the center of the CPS. The end of the balun is connected to the CPS line through a shorting pin. The effects of various geometrical parameters and balun on the antenna characteristics are examined. An antenna, as an design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.759-766
• /
• 2022

In this paper, we propose a multi-band small antenna with CPW(Coplanar Waveguide) feeding structure WLAN(Wireless Local Area Network) and WiMAX (Worldwide Interoperability for Microwave Access) bands. The proposed antenna is designed two slit in the modified monopole type radiator and FR-4 substrate, which is thickness 1.0 mm, and the dielectric constant is 4.4. The size of proposed antenna is 15.1 mm⨯16.41 mm, and total size of proposed antenna is 17.5 mm⨯16.4 mm. From the fabrication and measurement results, From the fabrication and measurement results, bandwidths of 439 MHz (2.06 to 2.499 GHz), 840 MHz (3.31 to 4.25) and 1,315 MHz (5.23 to 6.545 GHz) were obtained on the basis of -10 dB impedance bandwidth. Also, 3D radiation pattern characteristics of the proposed antenna are displayed and measured gains 2.24 dBi, 2.83 dBi, and 2.0 dBi shown in the three frequency band, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1767-1773
• /
• 1993

In this paper, the coupling characteristics as well as the self and the mutual Impedance of a two-element probe-fed stacked circular microstrip array antennas are presented. A full wave analysis for the structure is performed In the spectral domain using the vector Hankel transform(VHT). Also, we presented measured results for the impedance, the coupling characteristics of the antenna and the variation of the coupling with the distance between the two elements. Finally, the calculated and measured results are shown to agree well wlth each other through comparisons.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.73-78
• /
• 2021

To minimize the resonance frequency error when design Inset-Fed Microstrip Patch Antenna using current formulas. Especially It is found that a constant relation between Antenna patch width and frequency error. Using this relation, calculation frequency and simulation frequency are compared. Finally the comparison induced a formula of revised antenna patch width for accurate frequency in 2-10 GHz. And this formula reduced 2.54% of average frequency error. Last, the Antenna which has same variation with the simulation was producted and measured. It proved the formula's validity.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.297-301
• /
• 2002

본 논문에서는 광대역 원형 링슬롯 안테나의 광대역 특성이 일어나는 메커니즘 연구를 통해 새로운 광대역 안테나 설계 및 분석에 도움을 줄 수 있도록 하였다 먼저 기존의 광대역 안테나 및 공진회로 개념을 이용하여 새로운 광대역 안테나의 이론적인 분석을 하도록 하였으며, 기존의 광대역 안테나를 설계하는 방법(자기유사구조, 자기상보구조, 길이보다 각을 강조한 구조, 두꺼운 도체를 사용하는 구조 등)외에 최근들어 많이 연구되고 있는 안테나의 Q값을 줄이는 방법에 대해 분석 및 정리하고 본 원형 링슬롯 안테나의 복사기와 급전선사이에서 광대역이 일어나는 메커니즘에 대해서 연구하였다.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.211-214
• /
• 2007

In this paper, we have designed microstrip antenna if 800[MHz] band It will be able to integrate TRS(Trunked Radio System), GSM(Global System for Mobile telecommunication) band including the CDMA(Code Division Multiple Access) band we designed repeater and a base station antenna which is possible at the ship and marine of safety. It is improves a narrow bandwidth problem of microstrip antenna. It had U-shaped feeding structure at a rectangular patch And ground or feeding structure used between dielectric constant(${\varepsilon}_T$ = 2.1), patch or feeding structure used between dielectric constant(${\varepsilon}_T$ =1). So it used a duplex resonance effect Designed frequency bandwith(V5WR 2:1) if the antenna showed good characteristic of $780[MHz]{\sim}1.83[GHz]$ to 2.61[GHz]. Also the E-plan and H-plan all profit 9.4[dBi] above, the 3[dB] beam width showed the characteristic over the E-plan and H-plan $60^{\circ}$ to be improved.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.965-971
• /
• 2001

In this paper, the triangular u-slot patch antenna for the PCS & IMT-2000 dual band are studied. The frequency bandwidth of a triangular u-slot patch antenna can be increased by L-strip fed structure. The impedance bandwidth(VSWR$\leq$2) of the fabricated single element is 590 MHz(30.18 %). Using the frequency bandwidth of PCS & IMT-2000, we confirm VSWR below 1.65, which is a good characteristic. Thus the wideband characteristic of the L-strip fed structure is confirmed experimentally.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.107-115
• /
• 2005

This paper presents the structure of a broadband coplanar waveguide(CPW) fed square slot antenna with a impedance bandwidth tuning patch. The designing method of the antenna suggests that two resonant frequencies are excited as a dual-frequency dipole antenna following the dimensions of the square slot. In other words, the lower resonant frequency mainly depends on the slot width and the higher one its length. A CPW fed square slot antenna with a impedance tuning patch was measured to $20GHz^\~33GHz$, $50\%$, VSWR=2 impedance bandwidth by adjusting the dimensions of the tuning patch when the slot length had $70\%$ of its width. This result shows that a medical CPW fed antenna is easily implemented with a simple square slot structure including a bandwidth tuning patch in the center.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.101-107
• /
• 2003

In this study, we provide a single element log-periodic antenna that the feeding networks and array structures are aperture coupled and series dipole array type. We made the antenna for direct receiving the Moogoongwha satellite broadcasting signal. The transmission power was able to feed the patch dipole in series due to lay perpendicularly 8 series patch dipole on tapered slot. The patch dipole radiation pattern which fed in series power, make the main beam direction up $37^{\circ}{\sim}42^{\circ}$ within the BS/CS bandwidth. The main beam gain was measured 9.31~11.03 dBi. Using 32 elements to array the elements properly, we acquire $4{\times}8$ array structure on limited PCB board. As a result, it has been found that the new planar DBS antenna structure have high gain over 10dBi and acceptable elevation angle over 42 degree, and we can apply this result to commercial DBS reception antenna manufacturing.