• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.105.1-105.1
• /
• 2009

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.2
• /
• pp.115-131
• /
• 2011

Recently, considering the aspects of disaster prevention and environmental damage, the construction of a twin tunnel is increasing. When constructing a twin tunnel, the stresses are concentrated at the pillar so that stability of the tunnel is decreased. Since the previous studies on the behavior of a twin tunnel pillar are mainly restricted to the estimation of the tunnel behavior and the analysis of surface settlement, there is a limit to a quantitative stability estimation of the pillar. Therefore, it was quantitatively investigated how the pillar width of a twin tunnel affects its stability. To ensure this end, global tunnel safety factors obtained numerically using shear strength reduction technique, local safety factors of a pillar using the equation that Matsuda et al. suggested, and strength/stress ratios of the pillar were estimated and their results were analyzed for two sections with different rock covers. For a reasonable design of a twin tunnel pillar, it was turned out that strength/stress ratio, the local pillar safety factor, and global tunnel safety factor should be used interrelatedly rather than independently.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.130-136
• /
• 2010

Astaxanthin is an unsaturated compound with a double bond. So it is easily decayed by heat and oxidation (light) during its storage and processing of it. Nanoliposome formulation technology was utilized to improve the stability of astaxanthin. Nanoliposome preparation conditions were established and the stability of astaxanthin encapsulated nanoliposome and free astaxanthin was investigated. Thermal stability and UV-stability of astaxanthin encapsulated nanoliposome increased up to two times and tree times, respectively. Astaxanthin encapsulated nanoliposome could be used as a stable functional material for industrial purposes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1867-1873
• /
• 2008

호안은 제방 및 저수로 하안을 강수와 유수에 의한 파괴와 침식작용에 대하여 직접 보호할 목적으로 설치하는 것이다. 최근에는 자연형.생태하천 등 하천의 친수성.경관.생태계의 보전.재생 등이 중요시 되면서 이런 기능을 가진 많은 호안공법들이 개발 및 시공되고 있다. 하지만 이러한 호안공법에 대한 홍수시의 수리적 안정성 검토 등의 기술적인 검토가 충분치 않은 실정이다. 따라서 호안공법이 적용된 호안에 대해 홍수시의 수리적 안정성에 대한 분석이 필요하다. 본 연구에서는 호안 조사결과 우리나라에서 가장 많은 시공사례가 있는 콘크리트 식생블록에 대해서 개수로 수리모형실험을 통하여 호안의 수리적 안정성을 분석하였다. 분석에 이용된 모형은 실제 하천에 많이 적용되고 있는 H형 식생블록을 1/10 축소모형을 제작하여 사용하였다. 호안경사 1:2에 대해 식생이 없는 경우, 식생이 0.08m, 0.04m 간격으로 있는 경우에 대해 유량을 변화시키면서 식생밀도에 따른 유속 저감 및 소류력 저감 효과에 대한 수리적 안정성을 분석하였다. 그 결과 호안경사 및 식생밀도는 호안부에서 흐름의 에너지 및 유속을 감소시키며, 식생이 없는 호안에 비해 식생이 있는 호안에서는 식생밀도가 증가함에 따라 소류력이 최대 62.24%까지 감소하였다. 호안부에서의 식생의 발달은 유속 및 소류력을 감소시켜 호안부의 안정화에 크게 기여하고 있음을 알 수 있었다.

• Geotechnical Engineering
• /
• v.4 no.4
• /
• pp.5-18
• /
• 1988

A series of CU triaxial compression tests were conducted to investigate the variation of -untrained shear strength of underconsolidated clay at different degrees of consolidation. The soil samples were artificially made by one-dimensional consolidation using soft Bangkok Clay. The test results showed that the undrained shear strength of clay parabolically increased convoking downward with increasing degrees of consolidation. However, all the measured shear strength were unanimously related to the effective stress. These experimental results were used in the numerical analysis. A finite element computer program was developed to investigate the stability of submarine .slope undergoing rapid deposition taking into account the variation in soil compressibility and permeability during the consolidation process. The relationships of degree of consolidation with time as a function of rate of deposition and angle of slope were established. A method of predicting the time of slope failure and the volume of moving mass of soil was also made.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.105-110
• /
• 2011

Recently, a deep mixture method as a soil improvement method of marine soft ground, which causes less noise and vibration than other methods, are widely used. In this study, for DCM(Deep Cement Mixing) method, one of the deep mixture method, optimum mixing ratio of clay-cement was suggested using uniaxial compression tests on specimens with various mixing ratio of claycement. In addition, the stability of a caisson on tangent circle-type and wall-type DCM treated ground was evaluated using centrifuge tests. As a result, optimum mixing ratio of clay-cement was 28.5% and the stability of the caisson on DCM treated ground was confirmed. However, the lateral displacement of the caisson on the wall-type DCM treated ground was 7% less and the settlement of that was 39% less than the case of the tangent-circle-type DCM method.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.71-82
• /
• 1999

Irregular motions of nonlinear dynamic system are the result of an intrinsic characteristics that the system have, and sometimes occur unpredictable large motion. For a ship in a regular seaway, the capsizing occur because of this unexpectable motion. So, from the safety's point of view, nonlinear ship motions should be treated carefully. In this study, stable and unstable regions are investigated firstly under the variation of a control external force. Secondly, we consider the attractors to know how ship motions of the stable region that does not undergo capsizing change. Thirdly, bifurcation diagram is considered to study the range in detail where nonlinear chaotic motions are occurred.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.615-622
• /
• 2002

Weather-resistant coatings were prepared by mixing a synthesized mill-base and let-down silicone/acrylic resin in weight ratios of 4 : 6, 3 : 7, and 2 : 8. The weatherability of the prepared coatings was tested. The thermal stability, general physical properties, and weatherability of the films of the coatings were improved with silicone content. Among the three mixing ratios mentioned, the ratio of 2 : 8 was the most suitable for the preparation of weather-resistant Coatings. The coatings containing 30 wt% of silicone proved to be a high weather-resistant coating.

• Journal of Convergence Society for SMB
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2013

This study examine the relation between small and medium firm's stability and tax avoidance. We use some financial data of small and medium IT firms in KOSDAQ during 2001 to 2009. Following previous research(Desai and Dhamapala 2006), we estimate corporate tax avoidance. And we use quick ratio and current ratio as a short-term stability and equity ratio as a long-term stability. Empirical results follows as. First, It was not significant statistically between short-term stability and corporate tax avoidance. Second, it was significant statistically between the long-term stability and corporate. As corporate tax avoidance increases, the long-term stability(equity ratio) was low. Our analysis provides the empirical evidence between long-term stability and tax avoidance. It offers implications of corporate tax avoidance to small and medium IT firms in KOSDAQ. But this results is difficult generalization because of sample limits.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.139-139
• /
• 2010

금속 실리사이드 나노입자는 열적 및 화학적 안정성이 뛰어나고, 절연막내에 일함수 차이에 따라 깊은 양자 우물구조가 형성되어 비휘발성 메모리 소자를 제작할 수 있다. 그러나 단일 $SiO_2$ 절연막을 사용하였을 경우 저장된 전하의 정보 저장능력 및 쓰기/지우기 시간을 향상시키는 데 물리적 두께에 따른 제한이 따른다. 본 연구에서는 터널장벽 엔지니어링을 통하여 물리적인 두께는 단일 $SiO_2$ 보다는 두꺼우나 쓰기/지우기 동작을 위하여 인가되는 전기장에 의하여 상대적으로 전자가 느끼는 상대적인 터널 절연막 두께를 감소시키는 방법으로 동작속도를 향상 시킨 $SiO_2/Si_3N_4/SiO_2$ 및 $Si_3N_4/SiO_2/Si_3N_4$ 터널 절연막을 사용한 금속 실리사이드 나노입자 비휘발성 메모리를 제조하였다. 제조방법은 우선 p-type 실리콘 웨이퍼 위에 100 nm 두께로 증착된 Poly-Si 층을 형성 한 이후 소스와 드레인 영역을 리소그래피 방법으로 형성시켜 트랜지스터의 채널을 형성한 이후 그 상부에 $SiO_2/Si_3N_4/SiO_2$ (2 nm/ 2 nm/ 3 nm) 및 $Si_3N_4/SiO_2/Si_3N_4$ (2 nm/ 3 nm/ 3 nm)를 화학적 증기 증착(chemical vapor deposition)방법으로 형성 시킨 이후, direct current magnetron sputtering 방법을 이용하여 2~5 nm 두께의 $WSi_2$ 및 $TiSi_2$ 박막을 증착하였으며, 나노입자 형성을 위하여 rapid thermal annealing(RTA) system을 이용하여 $800{\sim}1000^{\circ}C$에서 질소($N_2$) 분위기로 1~5분 동안 열처리를 하였다. 이후 radio frequency magnetron sputtering을 이용하여 $SiO_2$ control oxide layer를 30 nm로 증착한 후, RTA system을 이용하여 $900^{\circ}C$에서 30초 동안 $N_2$ 분위기에서 후 열처리를 하였다. 마지막으로 thermal evaporator system을 이용하여 Al 전극을 200 nm 증착한 이후 리소그래피와 식각 공정을 통하여 채널 폭/길이 $2{\sim}5{\mu}m$인 비휘발성 메모리 소자를 제작하였다. 제작된 비휘발성 메모리 소자는 HP 4156A semiconductor parameter analyzer와 Agilent 81101A pulse generator를 이용하여 전기적 특성을 확인 하였으며, 측정 온도를 $25^{\circ}C$, $85^{\circ}C$, $125^{\circ}C$로 변화시켜가며 제작된 비휘발성 메모리 소자의 열적 안정성에 관하여 연구하였다.