• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.68-75
• /
• 2015

Rock mass includes such discontinuities as fault, joint, bedding, crack, schistosity, cleavage. The rock mass behavior, therefore, is influenced by the discontinuity behavior. In this study, a stability and deformation analysis method considering discontinuities in rock mass is proposed, and then applied to the rock collapse disaster site. As the method, the stability analysis by the stereographic projection method was carried out in an actual site, the deformation analysis program by the finite element method including the joint element was developed, and performed. To demonstrate the applicability of this developed stability and deformation analysis method considering discontinuities in rock mass, the analysis results are examined and compared with the failure behavior at the rock mass.

• Journal of the Korea Computer Graphics Society
• /
• v.12 no.2
• /
• pp.39-44
• /
• 2006

컴퓨터 그래픽스 분야에서 변형체 애니메이션은 매우 중요한 기법으로 그 응용 범위가 매우 넓다. 본 논문에서는 큰 회전 변형에도 부피의 왜곡이 발생하지 않으며, 변형체의 어느 한 부위가 고정되어 있지 않고 자유롭게 움직일 수 있는 동적 탄성 변형을 실시간에 시뮬레이션 하는 기법을 제안한다. Choi와 Ko [3]가 제안한 모달 와핑 기법은 실시간에 부피의 왜곡이 없는 동적 탄성 변형을 생성할 수 있지만 탄성체의 어느 한 부위가 고정 되어 있어야 하며, Hauser 등 [9]이 제안한 임펄스 기반의 충돌 반응을 고려한 선형 모달 해석법은 안정적인 시뮬레이션 결과를 주지만 큰 변형에 있어서 부피 왜곡이 있다. 본 논문에서는 Choi와 Ko [3]가 제안한 모달 와핑 기법을 임펄스 기반의 충돌 반응을 포함하도록 확장하여 큰 회전 변형에도 부피의 왜곡을 방지하며 또한 자유롭게 움직이는 탄성체의 충돌 반응을 안정적으로 시뮬레이션 할 수 있게 한다.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.47-60
• /
• 2010

This study is focused on the analysis of tunnel behavior to estimate the stability on tunnel design. An estimation method was proposed as a hybrid consideration, which contains the displacement analysis by 3D numerical simulation, the maximum displacement obtained after field measurement, and an assessment of tunnel stability using a deformation analysis proposed by Sakurai(1988, 1997). The points of case study by Sakurai(1988, 1997) were replotted considering his analysis. From the new analysis of the tunnel case study, the trend line for analyzed points is analogized, which curve is divided into stable, unstable and failure zone. To evaluate the estimation method, a special shape of railway tunnel was selected, which are the Inchon international airport rail way connected to subway line 9 in Gimpo, Korea. The point s of upper and below track on the Inchon international airport rail way were satisfied to the stability of tunnel after reinforcing. Also the points shows the higher apparent Young's modulus, which resulted from improvement on shear strength by the micro silica grouting and the supporting of umbrella method. Therefore, if new analysis used, proper tunnel reinforcing method could be selected according to tunnel strain and geological property.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.339-347
• /
• 2008

This study was carried out to assess quantitatively the safety of a tunnel by using critical strains in the ground. Critical strain is a new material property of the ground. It can be applied as deformation limits in the ground due to excavation using the measured displacement at the tunnel construction site. To achieve this purpose, the critical strain concept was reviewed and applied to assess the tunnel safety. First of all, the calculated excavation displacements of a circular tunnel by commercial programs were investigated and inputted into a feedback analysis module to calculate strains in the ground. Then the safety of tunnels was evaluated based on the critical strain concept. Subsequently the measured displacements obtained in the field are utilized practically to assess the safety of tunnels using the critical strain concept. Through this study, it was confirmed that the critical strain concept is useful to assess the safety of tunnels quantitatively.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.151-159
• /
• 1998

디젤 엔진의 푸쉬로드 타입의 밸브 트레인에서의 힘의 전달 과정을 기구학적 응용을 통하여 구하였다. 이러한 힘의 최종 전달 단계인 캠과 평판 종동물의 접촉에서의 작용하중과 상대 운동 속도를 계산하였고 접촉면에서의 유막 두께를 고체면의 탄성변형을 고려하여 계산하였다. 특히 탄성 유체 윤활의 해석을 하는데 있어서 안정성과 수렴성이 우수한 멀티그리드 멀티레벨 기법을 사용하였으며 동하중 상태를 고려하여 유막 두께를 계산하고 기존의 정상상태의 해석해와 비교하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.73-82
• /
• 2010

The GFRP(Glass-Fiber Reinforced Plastic) pipe is designed to behave safely against the external forces and to secure stability of deformation and settlements of pipe, since it is laid under the ground. In this study, the evaluation for the pressure stability was carried out by performing the laboratory experiments to figure out the mechanical properties of Glass-Fiber Reinforced Plastic pipe, take a theoretical approach, and suggest the mechanical properties necessary for the analysis and design of GFRP. Numerical analysis is also conducted to evaluate on the field application through the comparison concerning relations between deformation and differential settlement in the GFRP and hume pipes when all and half sections are under the surcharge load.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.129-137
• /
• 2008

This paper intends to develop an assesment technique for the rapid and quantitative evaluation of tunnel safety during tunnel excavation by using displacement measurements. Control criteria for the field measurements are provided at tunnel construction sites in Korea and other countries. However, it was known that the criteria were not clear and varied depending on the construction sites. In order to make a reasonable support for guidelines, critical strain concept is introduced in this study. And the engineering meanings of the critical strain concept are investigated precisely. In order to do this, at first, the engineering meanings of the original concept from the previous researchers was investigated theoretically for the evaluation of tunnel safely. Subsequently displacement data were obtained by using the commercial program, then the evaluation of tunnel safely was conducted with the view point of previous researches. Additionally, strains are determined from the feedback analyses program by inputting measured displacements that were obtained from the commercial program, then the evaluation of tunnel safety was discussed with the critical strain concept. Consequently it can be concluded that the evaluation of tunnel safety can be determined quantitatively and rapidly in the field by introducing the critical strain concept.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.175-185
• /
• 1995

본 논문은 불확실한 환경에 접촉하는 매니플레이터의 강인 제어법을 제시하였다. 이 제어법은 고차수 보상기를 응용한 표적특성에 $H_{\infty}$ 강인제어 설계법을 적용하여 얻어졌다. 접촉중의 위치와 힘에 대한 강인 안정성과 강인 성능 조건을 유도하였다. 결과에 의하면, 위치제어기는 강인 안정성과 강인 성능 조건을 동시에 향상시킬 수 있으나, 힘 제어기는 그 둘 사이에 최적화가 요구되었다. 강인 성능 제어기를 얻기 위한 최적화 설계기법은 변형 해석 기법을 사용하였으며, 결과의 예를 제시하였다. 이 예에서는 힘제어기의 강인 성능이 설계될 수 있음을 보였다.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.13-22
• /
• 2006

The geotextile have been used in filtration and drainage for over 30 years in many applications of civil and environmental projects. Geotextile tube is compound technology of filtration and drainage property of geotextile. Geotextile have been used for various types of containers, such as small hand-filled sandbags, 3-dimensional fabric forms for concrete paste, large soil and aggregate filled geotextile gabion, prefabricated hydraulically filled containers, and other innovative systems involving containment of soils using geotextile. They are hydraulically filled with dredged materials. It have been applied in coastal protection and scour protection, dewatering method of slurry, and isolation of contaminated material. Recently, geotextile tube technology is no longer alternative construction technique but suitable desired solution. This paper presents the behavior of geotextile tube composite structure by 2-D limit equilibrium and plane strain analysis. 2-D limit equilibrium analysis was performed to evaluate the stability of geotextile tube composite structure for the lateral load and also the plane strain analysis was conducted to determine the design and construction factors. Based on the results of this paper, the three types of geotextile tube composite structure is stable. And the optimum tensile strength of geotextile is 151kN/m and maximum pumping pressure is 22.7kN/m.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.358-364
• /
• 2017

많은 공사 현장에는 개구부, 작업발판, 가설계단의 통로 등에서의 추락사고를 방지하기 위해 설치하는 가시설물 중 안전난간이 있다. 안전난간은 작업장에서 현장인부들의 생명과 직결되므로 반드시 적절한 기준에 맞춰 설계를 하는 것이 필요하다. 이러한 안전난간은 표준안전난간으로서 추락재해방지 표준안전작업지침[1]에 의해 설계 기준이 명확하게 명시되어 있으며 난간대와 기둥각 부분 접합부는 쉽게 변형, 변위를 일으키지 않는 구조를 가져야 한다. 본 연구에서는 지침에 지시된 표준안전난간을 실제 설계기준에 맞게 직접 구조물을 모델링하고 EDISON용 구조해석 프로그램인 CASADsovler를 통해 유한 요소 해석을 수행하여 안전난간에 가해지는 응력 및 변위 결과들을 통해 구조의 안정성을 시험해 보았다. 더하여 다구찌 기법과 최적설계에 기반하여 안전난간 무게의 경량 최적화를 위한 연구를 진행하였다.