• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.2
• /
• pp.127-133
• /
• 2016

In this study, water-in-oil (W/O) nanoemulsions of water/Span 80-Nikkol BL 25/oil system were prepared by the PIC method at elevated temperature. This method allows the formation of finely dispersed W/O nanoemulsions with low viscosity in this system. However, macroemulsions rather than nanoemulsions were prepared by PIC method at room temperature. As a result of the significant change of interfacial tension with temperature, the emulsion droplet size decreases from $2{\mu}m$ to 100 nm with the increase in temperature from $30^{\circ}C$ to $80^{\circ}C$. The droplet size of nanoemulsions prepared at $80^{\circ}C$ was in the range of 50 ~ 200 nm and the internal phase content could reach as high as 15 wt%. The most stable nanoemulsion was formed in the vicinity of 7.0 of optimum HLB of the emulsifier mixture. The obtained nanoemulsions were stable without obvious change in droplet size in one month. This study provides valuable information for optimizing the formation of W/O nanoemulsions with low viscosity. These results suggest that W/O nanoemulsions of low viscosity could be useful for cosmetics with soft feeling.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.4
• /
• pp.265-269
• /
• 2010

In this study, we varied emulsifiers and oils for obtaining nano-emulsions with low viscosity using solubilization method. We obtained the stable nano-emulsions with 100 nm droplet size composed with hexyl laurate, ceteareth-20, PEG-40 hydrogenated caster oil, glyceryl stearate, and stearic acid. This nano-emulsion was stable against time. The stability of nano-emulsions was measured through the change of particle size. The cooling process was an important factor for obtaining stable emulsions by solubilization method. Stability of nano-emulions was maximum only when cooled rapidly.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.417-423
• /
• 2015

Oil-in-water(o/w) nanoemulsions were prepared in the system of water/Span 80-Tween 80/long-chain paraffin oil via PIC method. With the increase of preparation temperature from 30 oC to 80 oC, the diameter of emulsion droplets decreased from 150 nm to 40 nm. By varying the HLB of mixed surfactants, we found that there was an optimum HLB around 13.0~14.0 corresponding to the minimum droplet size. The size of emulsion droplets increased upon increasing the ratio of oil/emulsifying agent. At $f{\leq}0.15$, the size of nanoemulsions could be kept constant more than 2 months. The increase in preparation temperature makes it possible for producing monodisperse nanoemulsions. Once the nanoemulsion is produced, the stability against Ostwald ripening is outstanding due to the extremely low solubility of the liquid paraffin oil in the continuous phase.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.3
• /
• pp.221-226
• /
• 2014

IIn this study, O/W type nano-emulsions were prepared by phospholipid-nonionic surfactant mixtures and octyldodecylmyristate using the phase transition low-energy emulsification method. The nano-emulsions were formed only in the very narrow area of the concentration of mixed surfactant and oil molar ratio of around 1 : 1. The particle size of the emulsions was decreased as adding the aqueous phase into the emulsions after phase inversion point unlike the emulsions formed only with nonionic surfactant. Nano-emulsion was stable at room temperature for more than a month. Thus, the nano-emulsions containing phospholipids can be widely used as a cosmetic formulations.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.339-347
• /
• 2013

Nano-emulsions are submicron sized emulsions that are under extensive investigation as drug carriers for improving the delivery of therapeutic agents. The aim of this research is to investigate the stability of nano-emulsions containing polymers. Nano-emulsions containing high concentrations of Carbopol 941, Aristoflex AVC, Aronbis M, Permulen TR 2 and Aculyn 44 were unstable compared with macroemulsions with polymers. The size of emulsion droplet manufactured by adding polymer before emulsification were larger than that of emulsion manufactured by adding polymer after the emulsification. The stability of nano-emulsion containing a low concentration of polymer was also decreased, however the effect was lower than that in the high concentration of polymer. Under similar viscosity of polymer, the sequence of unstability was Aristoflex AVC < Carbopol 941 < Permulen TR2 < Carbopol 941 + Aculyn 44 < Aronbis M.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.51-61
• /
• 2013

Researches on the oil recovery enhancement using the nanotechnology has recently been studied in the United States. The previous researches has focused mainly on the flow characteristics of nanoparticles in porous media, and the stability of the nano-emulsion itself. However, the analysis did not deal with the size effects between a nano-emulsion and the pore size which has an important role when nano-emulsion flows in the porous media. In this research, nano-based emulsion was fabricated which is able to be applied for the enhanced oil recovery techniques and its characteristics was analyzed. In addition, in order to identify the characteristics of nano-emulsions flowing through the porous media, the size effect was analysed by filtering test. According to the results, when the emulsion was fabricated, SCA(Silane Coupling Agent) or PVA(Poly Vinyl Alcohol) are added to improve the stability of emulsion. As the ratio of the decane to water increased, the viscosity of emulsion and the droplet size also increased. For the filtering test at the atmospheric conditions, the droplet did not go through the filter; only the separated water from the emulsion was able to be filtered. This phenomenon occurred because the droplet was not able to overcome the capillary pressure. At the filtering test by suction pressure, most of the emulsion was filtered over the filter size of $60{\mu}m$. However, the ratio of filtration was rapidly degraded at less than $45{\mu}m$ filters. This is caused due to deformation and destruction of the droplet by strong shear stress when passing through the pore. The results from the study on the basic characteristic of nano-emulsion and filtering test will be expected to play as the important role for the fabrication of the stable nano-emulsion or the research on the recovery of residual oil in porous media.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.260-265
• /
• 2013

In this study, nano-emulsions containing 0.01, 0.03, 0.05, and 0.10% ethyl acetate fraction of Hippophae rhamnoides (H. rhamnoides) leaf extracts were prepared. The particle size, particle size distribution and skin permeability of the nano-emulsions were evaluated for five weeks. Nano-emulsion was prepared by the sequential use of homogenizer and microfluidizer. Nano-emulsion containing the ethyl acetate fraction exhibited a monodispersed form. Nano-emulsion containing 0.03% ethyl acetate fraction was the most stable for five weeks. The in vitro skin permeation study of nano-emulsion containing 0.03% ethyl acetate fraction was carried out using Franz diffusion cell. The nano-emulsion showed a better skin permeability than that of O/W emulsion. These results indicate that the nano-emulsion containing the ethyl acetate fraction of H. rhamnoides leaf extract showed a remarkable stability and skin permeability than that of O/W emulsion.

• Korean Journal of Food Science and Technology
• /
• v.42 no.5
• /
• pp.565-570
• /
• 2010

A coenzyme Q10 nanoemulsion was prepared using high pressure homogenization with different valve type conditions (A, B, and C) and cycle numbers (1, 2, and 3). The particle size, transmittance, zeta potential, and coenzyme Q10 content of the prepared coenzyme Q10 nanoemulsion were measured. The stability of the prepared coenzyme Q10 nanoemulsion was evaluated on heating ($95^{\circ}C$), freezing ($-20^{\circ}C$), and different pH (2-10) conditions. Also, the prepared coenzyme Q10 nanoemulsion was stored at different temperatures of 4, 25, and $40^{\circ}C$ for 12 weeks to evaluate its storage stability. In this study, the optimal conditions of high pressure homogenization for the preparation of a coenzyme Q10 nanoemulsion were identified to be 150 MPa, C valve, and a cycle number of 3. The results showed that the prepared coenzyme Q10 nanoemulsion had an average particle size of 40 nm, generated no deposits or floating matter when stored at either 4 or $25^{\circ}C$ for 12 weeks, and displayed excellent dispersibility and transparency when processed at different pHs (4-10) or heating ($95^{\circ}C$) and, freezing ($-20^{\circ}C$) conditions. Our results indicated that a coenzyme Q10 nanoemulsion prepared by high pressure homogenization can be used for preparing beverages in the food industry.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.35 no.2
• /
• pp.79-89
• /
• 2009

The objective of this study was to find out the stable formulation of nano-emulsion containing high concentration of quercetin and to investigate the effect of an ethanol on the nano-emulsion prepared by POE (30) hydrogenated castor oil (HCO-30)/oil/quercetin/ethanol/water system. Nano-emulsion was prepared using emulsion inversion point (EIP) method as low-energy method plus homogenizer as high-energy method. To evaluate effect of ethanol and other components on the nano-emulsion, physical properties such as droplet size, morphology, and size distribution were determined. The optimal quercetin concentration was 0.2 % on the nano-emulsion. The droplet diameter was below 300 nm at the HCO-30 concentration below 2.00 %. Nano-emmulsion containing 4.75 % HCO-30 was the most stable and its mean droplet size was 172.40 nm. Finally, the size of nano-emulsion containing 4.00 % ethanol was 128.15 nm and size distribution was also narrow. The results showed that the breakdown process of this nano-emulsion could be attributed to Ostwald ripening. This study about effect of ethanol on the nano-emulsion showed that loading capacity of drug could be increased by using a small amount of ethanol. As prepared stable nano-emulsion, this study showed that these results could be applied to pharmaceutics, cosmetic including skin-care products, perfume and etc.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.4
• /
• pp.273-279
• /
• 2017

In this study, low viscous O/W (oil-in-water) nano-emulsion with fatty acid and fatty alcohol was prepared by phase inversion emulsification method using Tween 80 and Span 80 widely used in cosmetic products. The particle size of the nano-emulsion was increased as increasing the concentration of fatty alcohol in oil phase. Adjusting the HLB of mixed surfactants, a stable nano-emulsion with a narrow size distribution was produced. Similar change in viscosity and electrical conductivity in both systems containing fatty acid and fatty alcohol was shown in the vicinity of the phase inversion point. However, high viscosity was shown in a wide range of different aqueous fraction unlike the system consisting only oils and surfactants. The low viscous nano-emulsion with less than 100 nm droplet size was stable for one month or more at room temperature. O/W nano-emulsions with low viscosity containing fatty acid or fatty alcohol produced by low-energy emulsification method can be widely used as formulations of cosmetics.