• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.209-216
• /
• 2004

In A bridge which connects Mokpo North Harbor and Com Island is going to be constructed until 2009. For the bridges being built in the navigable water area, it is indispensible to carry out vessel traffic safety assessment from the viewpoint of shiphandlers, however, there exist no specific guidelines for the necessary conditions whim the bridge designers can rely on. In this paper, traffic safety assessment procedures for the layout of the bridge is briefly introduced, and the conditions whim should be taken into account at the initial design stage of the bridge is surveyed. For the safety assessment of the bridge design, ship navigation simulations, such as RTS(real time simulation} and FTS(fast time simulation), are carried out, the results of which are statistically analysed to estimate the probability of collision between the ship and the pier of the bridge.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.735-743
• /
• 2004

A bridge which connects Mokpo North Harbor and Goha Island is going to be constructed until 2009. For the bridges being built in the navigable water area, it is indispensible to carry out vessel traffic safety assessment from the viewpoint of shiphandlers, however, there exist no specific guidelines for the necessary conditions which the bridge designers can rely on. In this paper, traffic safety assessment procedures for the layout of the bridge are briefly introduced, and the conditions which should be taken into account at the initial design stage of the bridge are surveyed For the safety assessment of the bridge design, ship navigation simulations, such as RTS( real time simulation) and FTS(fast time simulation), are carried out, the results of which are statistically analysed to estimate the probability of collision between the ship and the pier of the bridge.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.887-892
• /
• 2023

Vessel traffic service(VTS) centers are equipped with RADAR, AIS(Automatic Identification System), weather sensors, and VHF(Very High Frequency). VTS operators use this equipment to observe the movement of ships operating in the VTS area and provide information. The VTS data generated by these various devices is highly valuable for analyzing maritime traffic situation. However, owing to a lack of compatibility between system manufacturers or policy issues, they are often not systematically managed. Therefore, we developed the VTS Bigdata Platform that could efficiently collect, store, and manage control data collected by the VTS, and this paper describes its design and implementation. A microservice architecture was applied to secure operational stability that was one of the important issues in the development of the platform. In addition, the performance of the platform could be improved by dualizing the storage for real-time navigation information. The implemented system was tested using real maritime data to check its performance, identify additional improvements, and consider its feasibility in a real VTS environment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.263-271
• /
• 2005

The most important point when we engage on waterway dredging work is supplying safe navigational passage to the vessels underway by narrowing dredge work area and removing submerged dangers. In order to meet this end it is neccessary to use auxiliary equipment for shifting actively and mooring and adopt automation of dredging work by integrating information on real time position, dredging depth, and work information. The danger with a spud control system in this study, by the way, is able to employed on continuous dredging work with the narrowest working area allowing wide and safe passages to vessels underway, by moving the dredger to the working zone with the spud controlled automatically. Furthermore, it has been improved definitely compared with the existing dredging proccess management system such that it shows the track of spud and working depth on the electronic navigation chart of window, together with the final outcome of dredging work. The test dredging work at the entrance of Busan North Port for system evaluation showed that actual working time available was twice of the one by the existing anchor system, and that it reduced 38% of time for preparation work and one man power.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.145-157
• /
• 2017

Currently, the height of ships that can pass under Busan Harbor Bridge is limited to 60m or shorter, so that large-sized ships of 60m or taller cannot use Busan Harbor international passenger terminal. Accordingly, this study has developed a service which measures continuously the change of bridge height by water level changes and provides such in real-time for safe bridge passage of large-sized ships of 60m or taller. The measurement system comprised of high-precision laser distance measurement device, GPS sensor, optical module, and damping structure is used to measure the bridge height change according to tide level changes, and the measured information is provided in real-time through cloud-based mobile app. Also, in order to secure objective bridge height data for changes to height limits and navigation supports, the observation data was analyzed and forecast model was drawn. As a result, it became an objective evidence to revise the passage height rules of the Busan Port Bridge from 60 meters to 63 meters.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.445-450
• /
• 2017

It is necessary to set a route to reflect the traffic flow for the safety of the traffic vessels. This ongoing analysis is needed to ensure that the vessels comply with a route. The purpose of this study is to discover the problems of the recommended route vicinity for Wando Harbor and suggest an improvement plan. We used a support vector machine based on the ship's trajectory to establish an efficient route center line. Since the vessels should navigate to the starboard side, with reference to the center line of the recommended route, the trajectories of the vessels were divided into two clusters. The support vector machine is being used in many fields such as pattern recognition, and it is effective for this binary classification. As a result of this study, about 79.5 % of the merchant eastbound ships in a 2.4 NM distance to Jangjuk Sudo did not observe the recommended route, so the risk of collision always existed. The contraflow traffic rate of the route of the eastbound ships decreased from 79.5 % to 30.9 % when the recommended route was reset about 300 meters to the north, from its present position. The support vector machine applied in this study is expected to be applicable, to effectively set the route center line because the ship trajectories can be classified into two clusters.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.209-215
• /
• 2022

On the Jeju coast, international cruise ships, passenger ships, and other ships pass frequently, as well as many fishing boats. Thus, there is a high risk of marine accidents and frequent ship collisions. Accordingly, it is urgent to establish a coastal VTS for systematic safety management of ships passing through the coastal waters of Jeju. The purpose of this study was to set the area of the VTS to be newly established. In this study, to calculate the workload of the VTS operators, a formula was proposed that reflects the monitoring workload considering the monitoring frequency and required time for target as well as non-target ships and the workload for ship collision situations. The proposed formula was applied to the newly established VTS area in Jeju. Three control sectors were set up in each VTS center. The average number of workstations per hour was approximately 1, so the division between sectors was appropriate. Thus, it was deduced that there would be no workload for the VTS operators. It is expected that the method proposed in this study can be used as primary data for calculating the appropriate number of workstations for the current VTS, and setting the VTS area for a new coastal VTS in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.980-991
• /
• 2023

To prevent accidents near the quay caused by a ship, ports are generally designed and constructed through navigation and berthing safety assessment. However, unpredictable accidents such as ship collisions with the quay or personal accidents caused by ropes still occur sometimes during the ship berthing or mooring process. Automatic mooring systems, which are equipped with an attachment mechanism composed of robotic manipulators and vacuum pads, are designed for rapid and safe mooring of ships. This paper deals with a displacement and velocity measurement system for the automatic mooring device, which is essential for the position and speed control of the vacuum pads. To design a suitable system for an automatic mooring device, we first analyze the sensor's performance and outdoor environmental characteristics. Based on the analysis results, we describe the configuration and design methods of a displacement and velocity measurement system for application in outdoor environments. Additionally, several algorithms for detecting the sensor's state and estimating a ship's velocity are developed. The proposed method is verified through some experiments for displacement and speed measurement targeted at a moving object with constant speed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.138-144
• /
• 2013

Large and small marine accidents which are related to vessel's navigation are happening continuously and these maritime accidents have caused loss of lives and properties, and serious maritime environmental pollution damage. It is also true that maritime pollution damage is increasing due to these accidents, probability of growth of seaborne volume and complicated maritime traffic environment. Korea, recently, is developing an evaluation index which can assess sea risk through the evaluation of maritime traffic environment and provide danger and general information with relation to maritime traffic environment on target sea area to evaluate maritime traffic safety. In this paper, we intend to confirm the validity of maritime traffic safety on the basis of vessel navigator's risk consciousness and various sailing conditions by using the ship handling simulator. To confirm the validity of sailing vessel's maritime traffic safety, we use analysis of variance. By using analysis of variance, we analyze vessel navigator's characteristics, distance, speed and encounter type between vessels. Through multiple comparison of each factor's risk difference, we can confirm the change of numerical value of risk difference in statistical aspect.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.213-220
• /
• 2012

International Maritime Organization made International Convention for the Safety of Life at Sea to require all ships to carry official charts, both paper and electronic, and is especially encouraging the use of Electronic chart display and information system (ECDIS). Recently, the argument that all Electronic Charts(ENC) displayed in ECDIS should be distributed through Regional ENC Coordinating Center is being raised within the IHO. The use of ECDIS was generalized, but the existing two RENCs in Europe are thought to be not enough. Especially, East Asian region, due to its rapid growth in economy and marine traffic, RENC is found necessary. This research establishes the legitimacy and strategy of East Asian RENC by defining the roles of RENC based on the IMO ECDIS Mandatory Carriage Requirement and RENC operation status through suggesting a "Phase-In" RENC model, which was built upon the strategy of East Asian Hydrographic Commission(EAHC).