• Journal of the Korean Society of Marine Environment & Safety
• /
• 제19권4호
• /
• pp.397-402
• /
• 2013

In this study, numerical hull form development of a platform supply vessel, a full scale with the overall length of 26.75m, was performed to predict a bare-hull resistance and a large scale of model tests with a 1/10 scaled model were conducted to verify the success of numerical results. Numerical analysis on heave and pitch motion as a function of encounter frequency and ship's speed for the prediction of seakeeping characteristics are also presented. The experiment results of resistance agreed well with numerical analysis. As a result in the motion response characteristics, the heave RAO indicates high values with the range of encounter frequency 1.8~2.0. The Pitch RAO indicates high motion response characteristics at Beaufort scale No. 3 and 4 in rough seas.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제17권4호
• /
• pp.429-434
• /
• 2011

Bulk cargo loaded into ship can be damaged by various kinds reasons. This paper aims to analyze about cargo damage of coil carrier ship due to condensation. Condensation is the formation of liquid drops of water from water vapor. Condensation consists of small drops of water which form when warm water vapour or steam touches a cold surface such as a window. In general, condensation have occurred by temperature difference at large building and ship's tank. It is phenomenon that can occur often to oceangoing vessel moving temperature difference places in similar time. This paper proposes a new method using dehumidification device and fan heater to prevent bulk cargo damage of coil carrier ship from condensation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제21권1호
• /
• pp.103-108
• /
• 2015

Recent global warming has been recognized as the world economy development from fossil fuel use is the culprit. This study was reduce the fossil fuel has been developed in a number of alternative energy, As a fuel that can be produced in our country is a biofuel. Biofuels is a sustainable fuel having economically benefits and decreasing environmental pollution problems caused due to fossil fuel. A lot of research is progressing about the conversion of diesel biofuel as renewable clean energy. In this experiment were remodel the institution that has been used in fishing engine again produced an experimental apparatus were installed directly, were studied using various bio fuel like to help the economically and environmentally sound operation of the vessel. rapeseed oil, soybean oil, comprehensively analyzing the results the effects of the exhaust emission characteristics of the waste rapeseed oil is available in a marine engine with similar physical and chemical components of the fuel, and the fuel consumption ratio, NOx is slightly increased, but soot was confirmed a tendency to decrease much.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.26-27
• /
• 2010

Illegal aquaculture farms that cause marine pollution and ship accidents are managed and controlled by local organizations, but they experience many difficulties due to the vast waters and insufficient human resources. This study aims to utilize new IP-RFID technology to propose an efficient aquaculture farm facility management system This system attaches Ip-Tags to aquaculture farms that can provide facility information and location in real-time through IP communications. This allows for efficient management of facilities and the restriction of illegal farms. This system can also provide locations of farm facilities that sink to the ocean floor, reducing marine pollution caused by lost farms.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.11-21
• /
• 1996

선박은 화물 및 여객을 수송하는 해상교통 수단으로써 여객 및 승무원의 안락성, 탑재장비, 기기의 성능 보전 상, 화물 및 구조부재의 안전성 차원에서 진동제어가 주요 해결 기술의 하나이다. 또한 최근 선박의 대형화, 고속화로 인해 엔진과 프로펠러의 기진력은 커지는데 반해 구조 강도계산 기술의 발달로 인해 선체구조 경량화가 촉진되어 선체의 유연성이 커질 뿐 아니라 전통적인 선체 구조와 기관, 축계 강성사이의 균형이 깨어짐으로 선박의 진동제어는 더욱 중요시 되고 있다. 선박의 경우 건조 후에 진동제어를 위한 조치를 취하는 일은 매우 제한적이고 많은 비용이 들기 때문에 설계단게에서 선박진동제어를 위한 사전 노력이 충분히 이루어지는 것이 중요하다. 따라서 선박의 주 기진원인 프로펠러, 주기관 등의 기진력 자체를 적정화하는 노력과 함께 그로 인한 응답을 극소화하기 위해 설계 단계부터 인도까지 단게별로 많은 노력을 기울이고 있다. 단계별 진동제어의 한 예를 Fig.1에서 보여주고 있다[1]. 선체와 같이 복잡한 대형구조물의 진동특성 및 응답을 계산함에 있어서 컴퓨터의 발달과 유한요소법과 같은 해석기술의 발달로 실제 구조와 매우 유사한 3차원 모델링이 가능하게 되어 해석의 정도를 높일 수 있게 되었다. 그러나 프로펠러 기진력, 유체와의 연성효과, 감쇠특성 등을 정도 높게 산정하는 데는 아직도 많은 어려움이 있다. 이와같은 문제는 진동응답의 계산정도를 저하시키는 주요 요인이 되어 설게단계에서 충분히 진동 제어가 이루어졌다 하더라도 건조 후 실제운항 시 진동문제가 발생되는 경우가 있다. 건조 후 진동문제 발생시 구조변경을 통한 해결은 한계가 있기 때문에 각종 진동제어 장치의 연구개발이 최근에 활발히 이루어지고 있다[2]. 본 고에서는 설계단계에서부터 건조 후까지의 선박진동제어 과정[1,2,5,6]을 단계별로 고찰하여, 점점 까다로워져 가는 선박 진동규제[3,4]에 대처하고 승무원의 안락성에 대한 욕구, 구조물의 안전성, 장비의 성능보존이 만족되는 저진동 선박의 건조를 위해 향후 해결해야할 과제들을 도출하여 선박진동분야이 연구개발 방향을 제시하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제38C권4호
• /
• pp.371-377
• /
• 2013

Fishing boats more than 5 tons is obliged to VHF DSC by Fishing Vessels Act and Vessel Safety Act. The owner of the fishing vessel is equipped to the automatic position reporting device in accordance with the Notice of the Minister of Land, Transport and Maritime Affairs to regulations, shall be ensure to navigations safety and in order to respond quickly in the event of maritime accidents on fishing vessels. East sea set up to start in 2012, which is now underway the annual install plain to the yellow sea and the south sea for VHF coast stations. It is web-based remote operation of DSC on the remote control and monitoring in Fishery Information Communication Station for the coastal VMS construction project. All fishing vessels is VHF DSC in conjunction with the GPS that location information transmitted to the coast station. automatically by the DSC call. This paper has been studied on the communications coverage set up and traffic operation for realization a roaming service by navigation route tracking and RSSI techniques in parallel algorithm refer to VHF DSC coast stations in east sea.

• Journal of Advanced Navigation Technology
• /
• 제22권1호
• /
• pp.13-19
• /
• 2018

In this paper, we classified a flight pattern of unmanned aerial vehicle(UAV) which will be operating in UTM system and analyzed its flight pattern by purpose of use. Flight patterns of UAV are sorted into three patterns which are circling, monitoring and delivery. We considered four cases of industry areas using UAV which are agriculture, infrastructure monitoring, public safety & security(p.s.s) and delivery. It is necessary to build a simulation model as a verification tool for applying the flight pattern according to the use of UAV to the real UTM system. Therefore, we propose the simulation model of UAV with updating states over time. We applied simulation to UAV monitoring flight pattern, and confirmed that the flight was done by the given input data. The simulation model will be used in the future to verify that the UAV has various flight patterns and can operate safely and efficiently for the intended use.

• Journal of Navigation and Port Research
• /
• 제43권6호
• /
• pp.437-443
• /
• 2019

Aid to navigation is a navigational aid facility that informs a sailing vessel of its location and direction as well as a location of a specific obstacle by means of a light, shape, color, sound, radio wave, etc. It can be valuable in improving the safety of day and night vessel navigation at sea. For the safety of the tug boat, the minimum equipment requirements for each type of tug boat are arranged. Despite these preparations, the collision accidents between tug boats, barges, and light buoys can occur when the tug boat turns due to the length of the tow-line, tidal current, and the barge's momentum etc. The purpose of this study was to propose the basic system that analyzes the physical relationship between two vessels regarding the tug boat-barge-light buoy dynamics and propagate the corresponding data through the aid to navigation management & operation systems in use at each regional oceans and fisheries.

• Journal of Korea Port Economic Association
• /
• 제34권1호
• /
• pp.1-18
• /
• 2018

Philippines as one of the developing countries in Asia which is compose of more than 7000 islands. Air, Water and Land transportation are the means of travel in the country, however, transportation of goods and services between islands takes place through RoRo ships. There are about 154 RoRo routes connecting the islands in the Philippines and since its establishment, the incomes of the municipalities near the ports have increased by 7%. It is because of the increase of tourist, decrease of cost of transportation and travel time. In order to improve some of the routes in the Philippines, the researcher would like to suggest that the shipping companies should consider to upgrade some vessels. That is to have a vessel with a high-capacity storage for vehicles and goods so that mass transportation made. Another is that the ports need to be upgraded as well.

• Journal of Navigation and Port Research
• /
• 제42권3호
• /
• pp.187-194
• /
• 2018

Aids to Navigation (AtoN) is a marine traffic safety facility used to facilitate the safe and efficient movement of shipping and enhance the protection of the marine environment by the regulations or guidelines of The International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). Our country is managing AtoN to provide consistent services for AtoN users, although an average of 141 AtoN accidents occur annually. An AtoN accident forces non-planned work on the managers to resort the function, and causes psychological anxiety for its users, ultimately resulting in economic losses. This study developed the Social Cost evaluation model of AtoN accidents. The model can be used to quantify the manager's economic activities related to the shutdown and recovery, as well as the cost associated with the inconvenience to AtoN users. The Social Cost evaluation model of AtoN accidents is proposed as the sum of the encounter cost, administration cost and risk cost.