• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.155-157
• /
• 2010

선박운항자는 주위의 통항하는 선박과 적절한 거리를 두고 항과를 하고 있다. 지금까지는 30년전의 외국 자료를 이용하여 해상교통안전진단제도의 중요한 평가 지표로 우리나라에서 사용되고 있다. 또한 항과 거리에 대한 이전 연구에서는 선박 종류, 시정 등과 같은 외부 요인에 관계없이 항과거리가 조사되어 사용되고 있다. 하지만 선박운항자의 안전의식에는 외부 요인에 의하여 안전 의식에 상당한 차이가 있을 것으로 사료되며 이에 대한 분석이 필요할 것으로 사료된다. 이 분석 결과를 이용하여 제한수역에서의 선박 항과거리에 대한 가이드라인을 책정하여 해상교통관제에 이용할 수 있을 것이다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.5-7
• /
• 2006

항행하는 선박은 자기선박 주변을 하나의 영역으로 생각하여 그 영역안에 타선박의 허가하지 않는 자기만의 영역을 가지고 있다. 지금까지 우리나라에서는 선박간의 항과거리를 일본의 자료를 이용하여 해상교통 환경평가의 하나인 해상교통혼잡도를 평가하고 있다. 이 일본의 자료는 30년전의 자료이며 선박의 고속화${\cdot}$대형화로 인하여 선박간 항과거리는 선박의 통항형태, 항로의 종류, 선박의 크기에 따라 상이할 것으로 사료된다. 하지만, 상기의 모든 요소를 다 가미하여 일반화한 연구는 찾아보기 힘들며 상당한 자료를 이용하여야 하므로 분석하는데 시간이 많이 걸릴 것으로 판단된다. 이 연구에서는 해상교통량이 대단히 높은 중국 상해항을 입출항하는 선박간의 항행거리를 기초로 선박간의 최소 항과거리를 모델화함으로써 우리나라 실정에 맞는 해상교통혼잡도 평가에 이용하고자 하며, 선박운항자들의 항행에 최소 항과거리를 제공함으로써 안전항행에 도움을 주고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.77-78
• /
• 2007

The aim if the present research is to develop a guideline if a safe conducting distance according to separated distance and velocity if the two vessels to navigate safely in restricted waterways. The authors studied the hydrodynamic forces between two vessels running closely and calculated safe conducting distances according to separated distances and speeds if the vessels under the condition if wind and strong current.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.11-16
• /
• 2005

When a vessel passes near a channel boundary, the boundary creates forces and moments acting on the vessel. With the same reason passing of two vessels closely gives same effects to each other. The principal. difference between the above two cases is that the channel boundary is long and constant shape compared to those of vessels. The interaction forces and moments between two vessels could be assumed to be functions of the longitudinal distance $x_0$, transverse distance $y_0$ and speeds of the two vessels. Passage of one vessel close to another is important operationally from the viewpoint of replenishment at sea, avoidance of collisions and passage of two vessels in restricted channels. The authors studied the interactions between two vessels running closely and calculated safe conducting distances according to separated distances and speeds of the two vessels.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.735-740
• /
• 2010

This paper focuses on the effects of hydrodynamic forces between overtaking and overtaken vessels moving under the influences of external forces, such as strong wind and current in shallow water, in which condition the ship handling may become very complex. The purpose of this paper is to develop a guideline for safe conducting distance between two ships according to the velocity and the significance of external disturbances.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.647-652
• /
• 2005

When a vessel passes near a channel boundary, the boundary creates forces and moments acting on the vessel. With the same reason passing of two vessels closely gives same effects to each other. The principal difference between the above two cases is that the channel boundary is long and constant shape compared to those of vessels. The interaction forces and moments between two vessels could be assumed to be functions of the longitudinal distance $chi_0$, transverse distance $y_0$ and speeds of the two vessels. Passage of one vessel close to another is important operationally from the viewpoint of replenishment at sea, avoidance of collisions and passage of two vessels in restricted channels. The authors studied the interactions between two vessels running closely and calculated safe conducting distances according to separated distances and speeds of the two vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.660-670
• /
• 2016

This study expresses the necessity of recognizing Pyeongtaek Port as a specific traffic safety area to ensure the safety of the vessels that navigate there using quantitative data. The number of foggy days, pilotage distance, the number of large vessels and the number of fishing vessels that traveled between Pyeongtaek Port and 6 ports chosen as comparative study objects were compared and analyzed. The results showed that Pyeongtaek Port was more frequently affected by restricted visibility. With these perverse conditions, Pyeongtaek Port has a longer pilotage distance than Busan, Busan Newport, Ulsan or Pohang Ports by as much as 3.5-6 times. Especially from May to July, when fisheries were most functional, large vessels were required to navigate in an opposite direction to avoid 35 fishing vessels that were observed, creating an increased possibility for collisions among vessels. Therefore, the navigational safety of Pyeongtaek Port should be further secured by defining the approaching waters as specific traffic safety areas, giving large vessels legal priority over fishing vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.798-807
• /
• 2021

In the era of the fourth industrial revolution, Maritime Autonomous Surface Ship(MASS) are expected to emerge in the shipping industry. There has been much active research on collision avoidance systems regarding MASSs, but most of it has focused on merchant ships. A study of collision avoidance systems in fishing vessels is also essential, because Maritime Autonomous Surface Ships will encounter all type of vessels. In this study, the minimum passage distance between small-medium-sized fishing vessels and other vessels was investigated for the Ship's domain analysis. Based on the AIS data of Busan port and the adjacent area, the separation distances of fishing vessels were analyzed. The results indicated that as the speed of fishing vessels increased, the distance increased from 4L to 8L, and as length of the fishing vessels increased, the distance decreased from 10L to 6L. It is believed that the results of this study can be applied in the future to collision avoidance models for MASSs that reflect the domain of fishing vessels.

• Journal of Navigation and Port Research
• /
• v.42 no.3
• /
• pp.201-206
• /
• 2018

The purpose of this study is to estimate a proper Domain Watch between anchored vessels in order to propose a method for the efficient management of VTS(Vessel Traffic Service) of the N-anchorage in Busan harbor, which is the largest port in Korea. For this purpose, we proposed the calculation method of Domain Watch and investigated the ship length(L), the distance between anchored vessels ($D_{ij}$), the domain radius(R), and the domain radius vs L(R/L) during the peak time of the vessels in the latest usage of anchorage. As a result of technical analysis for the surveyed data, the minimum R/L for securing the safety distance between anchored vessels was selected based on 2.85 corresponding to the 70th percentile of the total data. This result was applied to the N-anchorage of Busan and compared with the 'Guidelines of Port and Harbor Design(2014)', and we have confirmed that it is reasonable to set the Domain radius with the minimum 2.85L or more in VTS. This study considers the safety management of anchorage for VTS. This study could contribute to the safety of vessels using anchorage and the safety management plan of VTS when it is applied to other ports in operation such as it was in Busan.

• Journal of Korea Port Economic Association
• /
• v.31 no.3
• /
• pp.107-120
• /
• 2015

International logistics systems for cross-border trading aim not only to reduce costs and time, but also to maximize added value. For accuracy of shipping time, cost reduction, rapidity, and safety improvement, demand for Ro-Ro shipping as a global supply chain operating system has increased. To anticipate these demands, this study estimates the optimal demand and scale of Ro-Ro berth construction by analyzing shipping volumes between Korea and Japan. Based on Ro-Ro shipping speeds and distances between Korea and Japan, the shipping volume (container and general cargo) of Busan port is sorted into two separate zones. After analyzing the ratio of items that have great potential benefits from using Ro-Ro shipping, we estimate possible shipping volumes using Ro-Ro berth provision. The results reveal that two berths for 20,000t vessels are additionally required to accommodate the estimated volume. Results suggest the construction of an exclusive Ro-Ro berth in Busan port. This would not only accommodate the demand between Korea and Japan, but also provide a way to avoid the lean-to-one-side port policy.