• Title/Summary/Keyword: 안전성 등급

Search Result 426, Processing Time 0.028 seconds

Risk Assessment Technique for Gas Fuel Supply System of Combined Cycle Power Plants (II) : Based on Piping System Stress Analysis (복합화력발전의 가스연료 공급계통에 대한 위험도 평가 기법 연구 (II) : 배관 시스템 응력 해석을 이용한 위험도 평가)

  • Yu, Jong Min;Song, Jung Soo;Jeong, Tae Min;Lok, Vanno;Yoon, Kee Bong
    • Journal of Energy Engineering
    • /
    • v.27 no.2
    • /
    • pp.14-25
    • /
    • 2018
  • The combined cycle power plant has a cycle of operating the gas turbine with fuel, such as natural gas, and then producing steam using residual heat. The fuel gas is supplied to the gas turbine at a level of 4 to 5 MPa, $200^{\circ}C$ through a compressor and a heat exchanger. In this study, the risk assessment method considering the piping system stress was carried out for safe operation and soundness of the gas fuel supply piping system. The API 580/581 RBI code, which is well known for its risk assessment techniques, is limited to reflect the effect of piping stress on risk. Therefore, the systematic stress of the pipeline is analyzed by using the piping analysis. For the study, the piping system stress analysis was performed using design data of a gas fuel supply piping of a combined cycle power plant. The result of probability of failure evaluated by the API code is compared to the result of stress ratio by piping analysis.

The Underwriting of Cancer (악성종양의 언더라이팅)

  • Park, Ip-Sae;Park, Sung-Soo
    • The Journal of the Korean life insurance medical association
    • /
    • v.25
    • /
    • pp.9-24
    • /
    • 2006
  • 지속적으로 증가 하고 있는 악성 종양 발병률의 증가, 생존률의 향상, 조기발견의 증가 등이 암 기왕자의 보험 수요 상승을 가져오고 있으며, 보험시장에서 더 이상 암 기왕자를 도외시하기 어렵게 만들고 있다. 그러나, 현재 국내에서는 암 기왕자를 인수할 수 있는 상품과 언더라이팅 인수 기법이 부족한 실정이다. 본 논문은 이러한 상황 하에서 기존에 거절체로 인식되었던 암 기왕자의 적극적인 인수를 위해 악성종양에 대한 보험 의학적인 고찰과 사망률, 위험도에 대해 분석하고, 국내에서 암 기왕자의 보험 인수 시 문제점과 그 해결방안을 모색해 보았다. 종양은 종양세포의 성장과 확산의 정도를 나타내는 병기와 조직학적 등급에 의해 그 예후와 경과가 예측 가능하며, 이 병기를 표준화하려는 국제적 시도로 1977년 American Joint Committee on Cancer(AJCC)는 TNM system 을 제시하였다. 병기를 기초로 치료의 결정도 함께 이루어지는데, 주요 치료법을 수술, 방사선치료, 항암치료, 면역요법이 있다. 이러한 치료법들은 후기 부작용을 일으키거나 이차성 암(Secondary malignant neoplasm)의 원인이 되기도 한다. 병기에 따른 암환자의 사망률을 살펴 보면, 암은 일정시기 동안 사망률이 급격히 증가하다가 이후에 점차 사망률이 감소하고, 그 이후에는 사망률에 영향을 미치지 않는다. 이러한 사망률 변화의 특성은 암 기왕자에게 평준식 정액 할증법(Per mille flat extra)의 적용이 적절함을 보여준다. 그러나, 현재 국내에서는 악성 종양 기왕자를 위한 상품이 전무한 상태이며, 암의 병리적 병기와 치료에 관련된 정보를 얻을 수 있는 도구도 부족하고, 명확한 인수 기법이 없다. 또한, 자체의 경험통계의 부족으로 위험에 대한 부담감이 큰 것이 현실이다. 하지만, 병기에 따른 사망률의 변화에서도 알 수 있듯이 평준식 정액 할증법의 도입이나, 악성종양의 병기(Stage)별 정액 할증률을 삭감법으로 전환하는 기준을 개발한다면, 종신보험은 충분히 인수가 가능하다. 또한, CI 보험도 암에 대한 부담보를 하는 선진사의 인수 기법을 도입하거나, 암 기왕자만을 위한 CI 상품을 개발하는 등 새로운 인수 기법을 모색한다면, 암기왕자 인수의 폭은 넓어질 것이다. 이와 같은 노력과 함께, 언더라이팅의 정보 획득을 위한 암 기왕자만의 고지서를 개발하고, 전문 언더라이터의 양성을 위한 노력을 게을리 하지 않는다면, 암기왕자를 적극적으로 인수할 수 있을 것이다. 앞으로 국내 보험사가 위와 같은 노력을 지속적으로 해 나가고, 비교적 예후와 경과가 양호한 0기와 1기 암 기왕자부터 단계적으로 종신보험의 인수를 시도한다면, 비교적 안전하게 경험치를 축적할 수 있을 것이다. 뿐만 아니라 국내 보험업계는 새로운 시장의 확보와 보험에 대한 대외 이미지 개선이라는 효과도 함께 얻게 될 것이다.

  • PDF

Effect of Light Transmittance Control on the Root Yield and Quality during the Growing Season of Panax ginseng (생육시기별 광량조절이 인삼의 수량 및 품질에 미치는 영향)

  • Cheon, Seong-Ki;Lee, Tae-Su;Yoon, Jong-Hyuk;Lee, Sung-Sik;Mok, Sung-Kyun
    • Journal of Ginseng Research
    • /
    • v.28 no.4
    • /
    • pp.196-200
    • /
    • 2004
  • This study was conducted to compare the root weight, yield, quality of fresh and red ginseng roots and crude saponin content in roots between fixing light transmittance(Control) and changing light transmittance(C.L.T.) during the ginseng growing seasons. The root weight in C.L.T. was higher than control by $35{\%}$ in early growth stage, $28{\%}$ in middle growth stage and $26{\%}$ in late growth stage in 6 years old ginseng plant. Root yield per 10a in C.L.T. was increased about $40{\%}$ as compared with that of control, also 1st and 2nd grade of fresh ginseng roots in C.L.T. was higher $(50.3{\%})$ compared with that $(12.9{\%})$ of control. The specific gravity of ginseng roots grown under the C.L.T. was exhibited the sig­nificant difference than control during the growing season in 4 and 6 years old ginseng plants. Red ginseng quality in C.L.T. was not only improved remarkably due to the increasement of heaven and earth grade red ginseng but also increased in crude saponin content than control. Therefore it needs to change the light transmittance(increasing light dur­ing low temperature periods and decreasing light during high temperature period) during the growing season for high yield and good qualities of ginseng roots.

Analysis of IoT Open-Platform Cryptographic Technology and Security Requirements (IoT 오픈 플랫폼 암호기술 현황 및 보안 요구사항 분석)

  • Choi, Jung-In;Oh, Yoon-Seok;Kim, Do-won;Choi, Eun Young;Seo, Seung-Hyun
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.7 no.7
    • /
    • pp.183-194
    • /
    • 2018
  • With the rapid development of IoT(Internet of Things) technology, various convenient services such as smart home and smart city have been realized. However, IoT devices in unmanned environments are exposed to various security threats including eavesdropping and data forgery, information leakage due to unauthorized access. To build a secure IoT environment, it is necessary to use proper cryptographic technologies to IoT devices. But, it is impossible to apply the technologies applied in the existing IT environment, due to the limited resources of the IoT devices. In this paper, we survey the classification of IoT devices according to the performance and analyze the security requirements for IoT devices. Also we survey and analyze the use of cryptographic technologies in the current status of IoT open standard platform such as AllJoyn, oneM2M, IoTivity. Based on the research of cryptographic usage, we examine whether each platform satisfies security requirements. Each IoT open platform provides cryptographic technology for supporting security services such as confidentiality, integrity, authentication an authorization. However, resource constrained IoT devices such as blood pressure monitoring sensors are difficult to apply existing cryptographic techniques. Thus, it is necessary to study cryptographic technologies for power-limited and resource constrained IoT devices in unattended environments.

LOCAL ANESTHESIA IN CHILDREN USING JET INJECTION INSTRUMENT (분사식 주사기를 이용한 소아환자의 국소마취)

  • Lee, Jae-Chun;Kim, Dae-Eop;Lee, Kwang-Hee;Kim, Seong-Hyeong;Yang, Kye-Sik
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.28 no.4
    • /
    • pp.633-637
    • /
    • 2001
  • Local anesthesia procedure in pediatric dentistry using needle-tipped syringes is stressful and painful for the child patients The Syrijet Mark II (Mizzy Inc. USA) is a jet injection instrument, which uses high pressure to propel fluids into soft tissue without the use of a hollow neeldle, so it seems to be able to reduce the injection phobia of the child patients. The authors compared the Syrijet with the conventional syringe by assessing the pain level after local anesthetic procedures using CAS(color analogue scale) which was developed from VAS(visual analogue scale). The result showed that the pain was reduced by the use of syrijet. The advantages of syrijet were no use of neeldes, the reuse of the anesthetic cartridge, and the safety to nerves and vessels. The disadvantages were the large size, the high price, and the need of skill to use.

  • PDF

A Study on Developing the Compliance for Infringement Response and Risk Management of Personal Information to Realize the Safe Artificial Intelligence Services in Artificial Intelligence Society (지능정보사회의 안전한 인공지능 서비스 구현을 위한 개인정보 침해대응 및 위기관리 컴플라이언스 개발에 관한 연구)

  • Shin, Young-Jin
    • Journal of Convergence for Information Technology
    • /
    • v.12 no.5
    • /
    • pp.1-14
    • /
    • 2022
  • This study tried to suggest crisis management compliance to prevent personal information infringement accidents that may occur in the process because the data including personal information is being processed in the artificial intelligence (AI) service process. To this end, first, the AI service provision process is divided into 3 processes such as service planning/data design and collection process, data pre-processing and purification process, and algorithm development and utilization process. And 3 processes are subdivided into 9 stages following to personal information processing stages to infringe personal information. All processes were investigated with literature and experts' Delphi. Second, the investigated personal information infringement factors were selected through FGI, Delphi, etc. for experts. Third, a survey was conducted with experts on the severity and possibility of each personal information infringement factor, and the validity and adequacy of the 94 responses were verified. Fourth, to present appropriate risk management compliance for personal information infringement factors in AI services, a method for calculating the risk level of personal information infringement is prepared by utilizing the asset value of personal information, personal information infringement factors, and the possibility of infringement accidents. Through this, the countermeasures for personal information infringement incidents were suggested according to the scored risk level.

A Survey on the Soil Environments of Alpine Vegetable Housing in Honam Area (호남지역(湖南地域) 고냉채소단지(高冷菜蔬團地)의 토양환경연구(土壤環境硏究))

  • Yoo, Chul-Hyun;Cho, Guk-Hyun;Choi, Jeong-Weon;Park, Keon-Ho
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.21 no.3
    • /
    • pp.246-253
    • /
    • 1988
  • This survey was carried out to obtain the basic information for the stable high yield of income-crops. Cropping systems, soil morphological and chemical properties were investigated. The obtained results were summarized as follows: 1. In Jinan and Jangsu, cultivated area of radish was 76.5% and.65.4%, respecitively, but in Unbong Chinese Cabbage, 71.1%, by second Crop. 2. In topographycal distribution, the mountain foot slope area in Jinan, Jangsu and Unbong was 69, 77 and 85%, respectively. In the distribution of elevation, semi-Alpine region in Jinan and Unbong was 85 and 69%, respectively, but Alpine region in Jangsu was 62%, of cultivated area. 3. Ploughing depth was 0 to 10 cm in Jinan and Jangsu, and 11 to 15cm, in Unbong. Gravel content class was 4th class in Jinan and 3rd class in Jangsu and Unbong. 4. For the distribution of soil types, normal upland came to 69.2% in Unbong, sandy and skeletal upland, 46.1 % and normal and sandy upland, 39 and 38%, respectively, in Jangsu. 5. The uplands soil classified as the 5th class, with improper for adequate cropping were. 6. For the chemical properties according to topography available phosphate $(-0.344^*)$, Ca $(-0.398^*)$, K $(-0.485^{**})$ and CEC $(-0.325^{**})$ showed the negative significancy with the elevation. 7. Among the variations of chemical properties by continuous cropping, the soil pH $(-0.491^{**})$ and the content of organic matter $(-0.434^{**})$, Ca $(-0.705^{**})$, CEC $(-0.512^{**})$, total nitrogen $(-0.559^{**})$ showed the high negative correlations, while the contents of available phosphate $(0.671^{**})$ and K $(0.543^{**})$ showed the high positive correlations, with the number of years of continuous cropping.

  • PDF

Effects of the Additives on the Quality of Alfalfa Silage (첨가제 처리가 알팔파 사일리지의 품질에 미치는 영향)

  • Kim, J.G.;Chung, E.S.;Kang, W.S.;Ham, J.S.;Kim, J.D.;Seo, S.;Lee, J.K.
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.19 no.2
    • /
    • pp.115-120
    • /
    • 1999
  • This experiment was carried out to investigate the effects of additives on the quality of alfalfa(Medicago sativa L.) silage at the forage experimental field, National Livestock Research Institute, RDA, Suwon in 1996. The experiment was arranged in a randomized block design with three replications. The treatments consisted of different additives(control, formic acid, molasses, inoculant A and inoculant B). Crude protein(CP) and Nitrogen free extract(NFE) content of alfalfa silage with additives were higher compared with those obtained control, but Crude ash(CA) and Crude fiber(CF) content of control(11.5 and 39.6%) were higher than those of additive treated plots. ADF and NDF contents of control silage were the highest as 36.2 and 48.6%, respectively, and increased by 4% compared with those obtained before ensiling. The acidity(pH) of control was the highest(5.45), but the lowest in inoculant A(4.32). Inoculant teratment significantly reduced acidity of silage compared with control. DM content of control silage was the lowest but DM loss of control silage was higher than that of additive treated silage. Ammonia-N content was the highest at formic acid treatment and level of Lactobacillus was decreased at control and formic acid treated silage. Total organic acid and lactic acid content of inoculant A and inoculant B were higher than those of other treated plots. The results of this study indicate that the treatment of LAB(Lactic acid bacteria) could be recommended as producing high quality of alfalfa silage.

  • PDF

Development of flow measurement method using drones in flood season (II) - application of surface velocity doppler radar (드론을 이용한 홍수기 유량측정방법 개발(II) - 전자파표면유속계 적용)

  • Lee, Tae Hee;Kang, Jong Wan;Lee, Ki Sung;Lee, Sin Jae
    • Journal of Korea Water Resources Association
    • /
    • v.54 no.11
    • /
    • pp.903-913
    • /
    • 2021
  • In the flood season, the measurement of the river discharge has many restrictions due to reasons such as budget, manpower, safety, convenience in measurement and so on. In particular, when heavy rain events occur due to typhoons, etc., it is difficult to measure the amount of flood due to the above problems. In order to improve this problem, in this study, a method was developed that can measure the river discharge in a flood season simply and safely in a short time with minimal manpower by combining the functions of a drone and a surface velocity doppler radar. To overcome the mechanical limitations of drones caused by weather issues such as wind and rainfall derived from the measurement of the river discharge using the conventional drone, we developed a drone with P56 grade dustproof and waterproof performance, stable flight capability at a wind speed of up to 36 km/h, and a payload weight of up to 10 kg. Further, to eliminate vibration which is the most important constraint factor in the measurement with a surface velocity doppler radar, a damper plate was developed as a device that combines a drone and a surface velocity Doppler radar. The velocity meter DSVM (Dron and Surface Veloctity Meter using doppler radar) that combines the flight equipment with the velocity meter was produced. The error of ±3.5% occurred as a result of measuring the river discharge using DSVM at the point of Geumsan-gun (Hwangpunggyo) located at Bonghwang stream (the first tributary stream of the Geum River). In addition, when calculating the mean velocity from the measured surface velocity, the measurement was performed using ADCP simultaneously to improve accuracy, and the mean velocity conversion factor (0.92) was calculated by comparing the mean velocity. In this study, the discharge measured by combining a drone and a surface velocity meter was compared with the discharge measured using ADCP and floats, so that the application and utility of DSVM was confirmed.

A Study on Estimating Shear Strength of Continuum Rock Slope (연속체 암반비탈면의 강도정수 산정 연구)

  • Kim, Hyung-Min;Lee, Su-gon;Lee, Byok-Kyu;Woo, Jae-Gyung;Hur, Ik;Lee, Jun-Ki
    • Journal of the Korean Geotechnical Society
    • /
    • v.35 no.5
    • /
    • pp.5-19
    • /
    • 2019
  • Considering the natural phenomenon in which steep slopes ($65^{\circ}{\sim}85^{\circ}$) consisting of rock mass remain stable for decades, slopes steeper than 1:0.5 (the standard of slope angle for blast rock) may be applied in geotechnical conditions which are similar to those above at the design and initial construction stages. In the process of analysing the stability of a good to fair continuum rock slope that can be designed as a steep slope, a general method of estimating rock mass strength properties from design practice perspective was required. Practical and genealized engineering methods of determining the properties of a rock mass are important for a good continuum rock slope that can be designed as a steep slope. The Genealized Hoek-Brown (H-B) failure criterion and GSI (Geological Strength Index), which were revised and supplemented by Hoek et al. (2002), were assessed as rock mass characterization systems fully taking into account the effects of discontinuities, and were widely utilized as a method for calculating equivalent Mohr-Coulomb shear strength (balancing the areas) according to stress changes. The concept of calculating equivalent M-C shear strength according to the change of confining stress range was proposed, and on a slope, the equivalent shear strength changes sensitively with changes in the maximum confining stress (${{\sigma}^{\prime}}_{3max}$ or normal stress), making it difficult to use it in practical design. In this study, the method of estimating the strength properties (an iso-angle division method) that can be applied universally within the maximum confining stress range for a good to fair continuum rock mass slope is proposed by applying the H-B failure criterion. In order to assess the validity and applicability of the proposed method of estimating the shear strength (A), the rock slope, which is a study object, was selected as the type of rock (igneous, metamorphic, sedimentary) on the steep slope near the existing working design site. It is compared and analyzed with the equivalent M-C shear strength (balancing the areas) proposed by Hoek. The equivalent M-C shear strength of the balancing the areas method and iso-angle division method was estimated using the RocLab program (geotechnical properties calculation software based on the H-B failure criterion (2002)) by using the basic data of the laboratory rock triaxial compression test at the existing working design site and the face mapping of discontinuities on the rock slope of study area. The calculated equivalent M-C shear strength of the balancing the areas method was interlinked to show very large or small cohesion and internal friction angles (generally, greater than $45^{\circ}$). The equivalent M-C shear strength of the iso-angle division is in-between the equivalent M-C shear properties of the balancing the areas, and the internal friction angles show a range of $30^{\circ}$ to $42^{\circ}$. We compared and analyzed the shear strength (A) of the iso-angle division method at the study area with the shear strength (B) of the existing working design site with similar or the same grade RMR each other. The application of the proposed iso-angle division method was indirectly evaluated through the results of the stability analysis (limit equilibrium analysis and finite element analysis) applied with these the strength properties. The difference between A and B of the shear strength is about 10%. LEM results (in wet condition) showed that Fs (A) = 14.08~58.22 (average 32.9) and Fs (B) = 18.39~60.04 (average 32.2), which were similar in accordance with the same rock types. As a result of FEM, displacement (A) = 0.13~0.65 mm (average 0.27 mm) and displacement (B) = 0.14~1.07 mm (average 0.37 mm). Using the GSI and Hoek-Brown failure criterion, the significant result could be identified in the application evaluation. Therefore, the strength properties of rock mass estimated by the iso-angle division method could be applied with practical shear strength.