• Review of KIISC
• /
• v.34 no.2
• /
• pp.5-12
• /
• 2024

양자 컴퓨팅 환경을 대비한 암호 시스템에 대한 중요성이 대두되면서 국내외로 양자 내성 암호 시스템 표준 알고리즘을 선정하려는 노력이 이루어지고 있다. AIMer는 MPCitH 기반 영지식 증명 시스템인 BN++을 개선하고 대칭키 프리미티브기반의 일반향 함수 AIM2를 결합하여 만들어진 전자서명으로, 현재 NIST의 양자 내성 전자서명 추가 라운드 및 양자내성 암호 국가 공모전(KpqC) 2라운드를 진행 중인 알고리즘이다. 많은 양자 내성 암호 시스템이 격자 문제에 안전성을 기반하고 있는 것에 비해 AIMer 전자서명은 사용하는 대칭키 프리미티브 기반 일방향 함수 AIM2의 일방향성에 안전성을 기반하고 있으며, 성능적인 측면에서도 현재까지 선정된 NIST 표준 알고리즘 및 KpqC 2라운드 후보 알고리즘 내에서는 비격자 문제 기반 전자서명 중 공개키 크기와 서명 크기를 합쳤을 때 가장 작은 크기를 가지고 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.254-260
• /
• 2017

The service life of civil infrastructure needs to be maintained or extended through appropriate inspections and maintenance planning, which results from the optimization process. A multi-objective optimization process can lead to more rational and flexible trade-off solutions rather than a single-objective optimization for the service life management of civil infrastructure. Recent investigations on the service life management of civil infrastructure were generally based on minimizing the life-cycle cost analysis and maximizing the structural performance. Various objectives for service life management have been developed using novel probabilistic concepts and methods over the last few decades. On the other hand, an increase in the number of objectives in a multi-objective optimization problem can lead to difficulties in computational efficiency, visualization, and decision making. These difficulties can be overcome using the objective reduction approach to identify the redundant and essential objectives. As a result, the efficiency in computational efforts, visualization, and decision making can be improved. In this paper, the multi-objective optimization using the objective reduction approach was applied to the service life management of concrete bridges. The results showed that four initial objectives can be reduced by two objectives for the optimal service life management.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.249-249
• /
• 2011

본 연구에서 AFDA(Approximate Full Distribution Approach)를 사용하여 하수관의 성능불능확률(Probability of capacity failure)을 정량적으로 산정할 수 있는 신뢰성 모형이 개발되었다. 전국 여러 도시의 연 최대강우강도(Yearly Maximum Rainfall Intensity)를 이용하여 그 확률분포함수를 규명하였고 우수관(Storm sewer)의 성능불능확률 산정을 위한 신뢰성모형에 적용하였다. 본 연구에서는 우수관의 성능불능확률을 산정하여 신뢰성 해석을 수행하였다. 먼저 적용도시의 강우자료를 면밀히 분석하고 연 최대강우강도의 통계적 특성을 분석하여 신뢰함수를 구축하였으며 우수관의 성능불능확률 산정을 위한 신뢰성 모형이 개발되었다. 그리고 우수관에 적체되는 토사의 깊이에 따라 우수관의 용량을 산정하였다. 재현기간별 강우강도를 사용하여 청주와 춘천의 원형우수관의 성능불능확률을 산정한 결과, 재현기간의 증가에 따란 성능불능확률을 급하게 상승하는 것을 알 수 있었다. 5년, 10년, 20년 재현기간에 따른 연 최대강우강도를 사용하여 청주와 춘천의 우수관의 성능불능확률을 산정하였다. 또한 토사의 적체에 따른 우수관 유효면적의 변화를 고려하여 두 도시의 우수관의 성능불능확률을 산정하였다. 원형 우수관의 성능불능확률을 산정한 결과, 토사의 적체에 따라 우수관의 용량은 감소하여 성능불능확률이 크게 증가하는 것을 확인 할 수 있었다. 따라서 우수관의 용량 감소를 막고 성능불능확률을 최소화하기 위해 우수관에 적체된 토사의 양을 예측할 수 있는 연구가 필요하며 적체된 토사와 콘크리트나 강관벽면이 복합된 우수관에 대한 조도계수를 보다 더 정확히 정량화 할 수 있는 연구가 수행되어야 할 것이다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.526-534
• /
• 2014

In this study, single-input transfer function model is applied to forecast monthly mean sea surface temperature(SST) in 2010 at Yeosu in Korean coastal waters. As input series, monthly mean air temperature series for ten years(2000-2009) at Yeosu in Korea is used, and Monthly mean SST at Yeosu station in Korean coastal waters is used as output series(the same period of input). To build transfer function model, first, input time series is prewhitened, and then cross-correlation functions between prewhitened input and output series are determined. The cross-correlation functions have just two significant values at time lag at 0 and 1. The lag between input and output series, the order of denominator and the order of numerator of transfer function, (b, r, s) are identified as (0, 1, 0). The selected transfer function model shows that there does not exist the lag between monthly mean air temperature and monthly mean SST, and that transfer function has a first-order autoregressive component for monthly mean SST, and that noise model was identified as $ARIMA(1,0,1)(2,0,0)_{12}$. The forecasted values by the selected transfer function model are generally $0.3-1.3^{\circ}C$ higher than actual SST in 2010 and have 6.4 % mean absolute percentage error(MAPE). The error is 2 % lower than MAPE by ARIMA model. This implies that transfer function model could be more available than ARIMA model in terms of forecasting performance of SST.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.423-433
• /
• 2017

During recent 5 years, it was recorded that 20% of total accident frequency and 30% of total number of death have been occurred due to drowsy driving. Drowsy driving accident is result from the loss of driving ability due to driver's accumulated fatigue. Continuous driving time can be measured as a surrogate variable to quantify the level of fatigue. The main purpose of this research is to investigate statistical correlation between the proportion of continuous driving vehicle (more than 2 hours) and the number of drowsy accidents. To carry this out, continuous driving time was measured using GPS route-guidance trajectory data. Also, accident frequency, traffic volume and segment length were collected to estimate safety performance function (SPF) for Jungbunearuk expressway in Korea. Through various types of estimated SPFs, statistical correlation was analyzed based on estimated statistical indices. This research can provide theoretical background for enforcement to regulate commercial vehicle driver's continuous driving time. In addition, throughout the trajectory data expansion, it is expected that strategy for anti-drowsy driving facilities installation can be established based on the suggested methodology.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.112-121
• /
• 1999

An MR(Magneto-Rheological) fluids damper is designed and applied to vibration suppression of a 1/4 car model. The damping constant of MR damper changes according to input current which is controlled in a semi-active way. Several control algorithms are compared in simulations and experiments. The advantage of the proposed Frequency shaped LQ control is that passenger comfort is emphasized in the range of 4~8Hz and driving safety is emphasized around the resonance frequency of unsprung mass.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.711-714
• /
• 2000

본 논문에서는, 기존의 멀티캐스트 그룹 키 관리 기법들을 고찰하여 멀티캐스트의 보안성의 필수 요건들을 살펴보고, 이를 기준으로, 안전한 IP 멀티캐스트 구조의 구성 요소들과 단방향 함수를 사용하는 상향식 키 트리를 결합한 안전한 인터넷 멀티캐스트 그룹키 관리 기법을 제안한다. 기존 IPSEC 인터넷 프로토콜의 표준안을 그대로 따르면서 그룹 인증 및 회원 개인 인증이 가능하며, 그룹 구성의 유동성에 대해 확장성이 보장되고, 효율적인 키 재구성 비용과 전방(forward) 및 후방(backward) 보안성이 지원되는 것이 특징이다. 그리고, 새로운 인터넷 멀티캐스트 기법의 성능을 분석하고, 다른 멀티캐스트 기법들과 성능상의 차이점을 비교해 본다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1013-1020
• /
• 2009

This paper proposes an authentication protocol using the key server in the ECPglobai RFID system. The proposed authentication protocol uses the key server and the time-out mechanism to resist various attacks including DoS(Denial of Service) attack. For easy implementation, the proposed protocol also uses the function existing in EPCglobal class 1 gen2 protocol without additive function such as hash function. The proposed protocol is evaluated through two analytical methods. The correctness of the proposed protocol is proved using the GNY analysis. By the security analysis, this paper showed that the proposed protocol is resistant to various attacks including DoS attack. The analytical results demonstrated that the proposed protocol offered a secure RFID system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.37-43
• /
• 2010

In this paper, a reliability-based design optimization is developed for the topology design of linear structures using a performance measure approach. Spatial domain is discretized using three dimensional Reissner-Mindlin plate elements and design variable is taken as the material property of each element. A continuum based adjoint variable method is employed for the efficient computation of sensitivity with respect to the design and random variables. The performance measure approach of RBDO is employed to evaluate the probabilistic constraints. The topology optimizationproblem is formulated to have probabilistic displacement constraints. The uncertainties such as material property and external loads are considered. Numerical examples show that the developed topology optimization method could effectively yield a reliable design, comparing with the other methods such as deterministic, safety factor, and worst case approaches.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.77-83
• /
• 2001

In recent years, the AES in North America and the NESSIE project in Europe have been in progress. Six proposals have been submitted to the NESSIE project including the LILI-128 by Simpson in Australia in the synchronous stream cipher category. These proposals tend towards a design with parallelism of the algorithms in order to facilitate speed-up. In this paper, we consider the PS-LFSR and propose the effective implementation of various nonlinear combiners: memoryless-nonlinear combiner, memory-nonlinear combiner, nonlinear filter function, and clock-controlled function. Finally, we propose m-parallel SUM-BSG and LILI-l28's parallel implementation as examples, and we determine their securities and performances.