• Korean Journal of Remote Sensing
• /
• v.40 no.1
• /
• pp.19-31
• /
• 2024

Ports are vital social infrastructures that significantly influence both people's lives and a country's economy. In South Korea, the aging of port infrastructure combined with the increased frequency of various natural disasters underscores the necessity of displacement monitoring for safety management of the port. In this study, the time-series displacements of Yeongilman Port and surrounding areas in Pohang, South Korea, were measured by applying Permanent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR) to Sentinel-1 SAR images collected from the satellite's ascending (February 2017-July 2023) and descending (February 2017-December 2021) nodes, and the displacement associated with the 2017 Pohang earthquake in the port was analyzed. The southern (except the southernmost) and central parts of Yeongilman Port showed large displacements attributed to construction activities for about 10 months at the beginning of the observation period, and the coseismic displacement caused by the Pohang earthquake was up to 1.6 cm of the westward horizontal motion and 0.5 cm of subsidence. However, little coseismic displacement was observed in the southernmost part of the port, where reclamation was completed last, and in the northern part of the oldest port. This represents that the weaker the consolidation of the reclaimed soil in the port, the more vulnerable it is to earthquakes, and that if the soil is very weakly consolidated due to ongoing reclamation, it would not be significantly affected by earthquakes. Summer subsidence and winter uplift of about 1 cm have been repeatedly observed every year in the entire area of Yeongilman Port, which is attributed to volume changes in the reclaimed soil due to temperature changes. The ground of the 1st and 2nd General Industrial Complexes adjacent to Yeongilman Port subsided during the observation period, and the rate of subsidence was faster in the 1st Industrial Complex. The 1st Industrial Complex was observed to have a westward horizontal displacement of 3 mm and a subsidence of 6 mm as the coseismic displacement of the Pohang earthquake, while the 2nd Industrial Complex was analyzed to have been little affected by the earthquake. The results of this study allowed us to identify the time-series displacement characteristics of Yeongilman Port and understand the impact of earthquakes on the stability of a port built by coastal reclamation.

• Journal of Service Research and Studies
• /
• v.13 no.4
• /
• pp.131-141
• /
• 2023

Changes in consumer needs and behaviors according to lifestyle changes lead to consumption culture, affecting the automobile market. However, research and research to provide options tailored to the lifestyle of consumers in related markets are still insufficient. Focusing on pickup truck accessories applied to pickup trucks that reflect lifestyle the most among vehicle types, this study first examined the theoretical background of the aftermarket market and lifestyle of pickup trucks. Second, through image mapping, the market possibilities and opportunity factors of pickup trucks were discovered through market size analysis and possibilities, and through this, user types could be classified. Third, interviews were conducted with those representing user types, the contents were organized, and interviews were conducted centering on related groups to create a persona of a user group, and what needs each group's persona wanted. Finally, a design concept suitable for the issue keywords and insights derived for each user lifestyle type was presented. In this study, the user type was divided into ① outdoor activity type, ② hobby activity type, and ③ small-scale work type, and a design case study was conducted by applying the concept suitable for the keyword for each group. For the outdoor activity type, a variable storage structure and a living space-type accessory design were presented, and for the hobby type, a modular decktop design and a sports coupe-type hardtop design were presented. For the small business type, a partition that is easy to fix the load and a stepper design that is easy to board the cargo box were presented. It is expected that the size of the pickup truck aftermarket will be expanded by diversifying the option designs that users want by lifestyle by applying them to the development of pickup truck accessories that fit the lifestyle of pickup truck users in the automobile market, which is currently mass customized.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.3
• /
• pp.106-113
• /
• 2023

We examined the heading responses of rice varieties over two years in Dandong, China to select the varieties that are adaptable to the bordering northwestern plains of North Korea. Dandong had slightly lower mean temperature than Sinuiju, North Korea but slightly higher than Supung, but it had almost the same day-length as the two regions in North Korea. In the two experimental years and two transplanting-date treatments, eight varieties (Jinbuol, Baegilmi, Joun, Jinok, Jopyeong, Jinbu, Sanhomi, and Odae) from South Korea and five varieties (Olbyeo2, Sonbong9, Onpo1, Gilju1, and Pyongdo5) from North Korea reached the heading stage not later than the latest heading dates of Dandong domestic varieties and the safe marginal heading dates of Dandong. We examined the basic vegetative phase (BVP), photoperiod-sensitivity (PS), and thermo-sensitivity (TS) of rice heading in a phytotron study to characterize the heading ecotypes of rice varieties adaptable to Dandong. For the rice varieties grown in Dandong experimental field, number of days to the heading stage was highly positively correlated with PS and, except middle and mid-late maturing three varieties, it was significantly positively correlated with BVP. Two-dimensional distribution plotting revealed that both 35 days or less BVP and 25 days or less PS were the characteristic heading ecotypes of the rice varieties adaptable to Dandong.

• Journal of Life Science
• /
• v.33 no.11
• /
• pp.923-935
• /
• 2023

Rubus crataegifolius (RC), Ulmus macrocarpa (UM), and Gardenia jasminoides (GJ) are well-known folk medicines in Asia used to treat various gastrointestinal disturbances. The present study evaluated the gastroprotective effect of LS-RUG-com, a mixture of commercially prepared powders of RC, UM, and GJ with a ratio of 3:1:2(w/w/w) against HCl/ethanol-induced gastritis, indomethacin-induced ulcers, and esophageal reflux-induced esophageal mucosal damage and Helicobacter pylori infections. In addition, TNF-α and IL-1β expressions were also determined and measured in esophageal tissue. As to HCl/ethanol-induced gastritis, the LS-RUG-com treatment at a dose of 150 mg/kg showed a remarkable anti-gastritis effect. Regarding indomethacin-induced gastric ulcers, the LS-RUG-com treatment had a significant anti-gastric ulcer effect. Furthermore, in the gastroesophageal reflux disease (GERD) model experiment, the LS-RUG-com treatment resulted in the histological recovery of stomach damage and mucosal injuries. Furthermore, the LS-RUG-com treatment led to an increase in gastric content pH, an increase in mucus protection, and a decrease in gastric pepsin output with a significant decrease in TNF-α and IL-1β. As to the Helicobacter pylori infected animal model, LS-RUG-com had a notable inhibitory effect on Helicobacter growth. The use of RC, UM, or GJ in isolation or the LS-RUG-com treatment as whole had good effects in terms of anti-oxidation, anti-neutralization, gastric acid secretion inhibition, and anti-lipid peroxidation, which supported the use of natural products as systemic gastric protective agents. Our results suggest that the LS-RUG-com might be a significant systemic gastroprotective agent that could be utilized for the treatment and/or protection from gastric disturbances and related damage.

• Korea Trade Review
• /
• v.48 no.3
• /
• pp.131-150
• /
• 2023

The purpose of this study was to find a countermeasure to the U.S. import refusals for the Korean healthcare and life sciences industry. To this end, an analysis of trends during the pandemic was conducted using the KITA Border Rejection Database, which includes information on items and types of import refusals. The reason for rejection was also analyzed according to the FDA violation codes. The degree of countermeasure for import refusals was identified by measuring the unit rejection rate (URR). The results of the analysis showed that the major U.S. import refusals for the Korean healthcare and life sciences industry had expanded from contact lenses to COVID-19 diagnostic kits and drugs after the pandemic broke out. The major reasons for import refusals were non-compliance with the Predicate Device and Drugs Act and non-approval by the FDA for products and facilities. On the other hand, the unit rejection rate (URR) of major items in the Korean healthcare and life sciences industry was measured higher than the industry average. The results therefore showed a low level of response to U.S. import refusals. The results of the analysis of reasons for import refusals by item according to FDA violation codes were as follows. First of all, the main violation for contact lenses and COVID-19 diagnostic kits corresponded to misbranding. This was often due to the fact that Korean companies did not provide the relevant notices and information required by the FDA. Many cases also failed to demonstrate a substantial equivalency compared to predicate devices already on the market. On the other hand, applications for new unapproved drugs were not accepted as they had yet to pass relevant regulations that would prove their safety and efficacy. In conclusion, import refusals for the Korean healthcare and life sciences industry were found to be closely related to technical barriers to trade (TBT).

• Analytical Science and Technology
• /
• v.36 no.6
• /
• pp.267-280
• /
• 2023

This study investigated the contents of Pb, Cd, As, and Hg for 4333 samples with 2 09 types of herbal medicines distributed in Seoul area from 2019 to 2021, and evaluated risk assessment according to medicinal part used and origin. The contents of heavy metals were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) and mercury analyzer. The average contents (mg/kg) of heavy metals by medicinal parts were 0.123 to 1.290 for Pb, 0.018 to 0.131 for Cd, 0.034 to 0.290 for As, and 0.003 to 0.015 for Hg. The contents of Pb were higher in Leaves and Whole Herbs (above-ground part) than underground part (Radix & Rhizoma) (ANOVA-test, p < 0.05). The contents of Cd were high in Leaves, Radix & Rhizoma, and Stems & Woods (ANOVA-test, p <0 .05), and exceeded regulatory limits in various types. Levels of Pb, Cd concentrations exceeding regulatory limits were observed in 8, 22 samples (8, 14 types). No sample exceeded regulatory limits of As and Hg. In the comparison between countries of origin, the contents of Cd, As, and Hg were high in imported herbal medicines (t-test, p < 0.05). As a result of the risk assessment, except for Thujae Orientalis Folium and Spirodelae Herba, the MOE values of Pb were all 1 or more, and most samples were safe. The Hazard Index (HI) for Cd, As, and Hg were evaluated to be less than 100 % even if the risk (%) of each heavy metal was added, and the risk from taking herbal medicines was evaluated to be safe.

• Analytical Science and Technology
• /
• v.36 no.6
• /
• pp.291-299
• /
• 2023

The benzo[a]pyrene in edible oils is extracted using methods such as Liquid-liquid, soxhlet and ultrasound-assisted extraction. However these extraction methods have significant drawbacks, such as long extraction time and large amount of solvent usage. To overcome these drawbacks, this study attempted to improve the current complex benzo[a]pyrene analysis method by applying the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method that can be analyzed in a simple and short time. The QuEChERS method applied in this study includes extraction of benzo[a]pyrene into n-hexane saturated acetonitrile and n-hexane. After extraction and distribution using magnesium sulfate and sodium chloride, benzo[a]pyrene is analyzed by liquid chromatography with fluorescence detector (LC/FLR). As a result of method validation of the new method, the limit of detection (LOD) and quantification (LOQ) were 0.02 ㎍/kg and 0.05 ㎍/kg, respectively. The calibration curves were constructed using five levels (0.1~10 ㎍/kg) and coefficient (R²) was above 0.99. Mean recovery ratio was ranged from 74.5 to 79.3 % with a relative standard deviation (RSD) between 0.52 to 1.58 %. The accuracy and precision were 72.6~79.4 % and 0.14~7.20 %, respectively. All results satisfied the criteria ranges requested in the Food Safety Evaluation Department guidelines (2016) and AOAC official method of analysis (2023). Therefore, the analysis method presented in this study was a relatively simple pretreatment method compared to the existing analysis method, which reduced the analysis time and solvent use to 92 % and 96 %, respectively.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.94-101
• /
• 2023

In this study, the development performance of the head bars, which is SD700, was experimentally evaluated at the RC (reinforced concrete) or SFRC (steel fiber reinforced concrete external beam-column joint. A total of 10 specimens were tested, and variables such as steel fibers, length of settlement, effective depth of the beam, and stirrups of the column were planned. As a result of the experiment, the specimens showed side-face blowout, concrete breakout, and shear failure depending on the experimental variables. In the RC series experiments with development length as a variable, it was confirmed that the development strength increased by 26.5~42.2% as the development length increased by 25-80%, which was not proportional to the development length. JD-based experiments with twice the effective depth of beams showed concrete breakout failure, reducing the maximum strength by 31.5% to 62% compared to the reference experiment. The S-series experiment, in which the spacing of the shear reinforcement around the enlarged head reinforcement was 1/2 times that of the reference experiment, increased the maximum strength by 8.4 to 9.7%. The concrete compressive strength of SFRC was evaluated to be 29.3% smaller than the concrete compressive strength of RC, but the development strength of SFRC specimens increased by 7.3% to 12.2%. Accordingly it was confirmed that the development performance of the head bar was greatly improved by reinforcing the steel fiber. Considering the results of 92% and 99% of the experimental maximum strength of the experiment arranged with 92% and 110% of the KDS-based settlement length, it is judged that the safety rate needs to be considered even more. In addition, it is required to present a design formula that considers the effective depth of the beam compared to the development length.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.426-441
• /
• 2023

This study investigated the predictive accuracy of a model of landslide displacement in Jecheon-si, where a great number of landslides were triggered by heavy rain on both natural (non-clear-cut) and clear-cut slopes during August 2020. This was accomplished by applying three flow direction methods (single flow direction, SFD; multiple flow direction, MFD; infinite flow direction, IFD) and the degree of root cohesion to an infinite slope stability equation. The application assumed that the soil saturation and any changes in root cohesion occurred following the timber harvest (clear-cutting). In the study area, 830 landslide locations were identified via landslide inventory mapping from satellite images and 25 cm resolution aerial photographs. The results of the landslide modeling comparison showed the accuracy of the models that considered changes in the root cohesion following clear-cutting to be improved by 1.3% to 2.6% when compared with those not considered in the area under the receiver operating characteristics (AUROC) analysis. Furthermore, the accuracy of the models that used the MFD algorithm improved by up to 1.3% when compared with the models that used the other algorithms in the AUROC analysis. These results suggest that the discriminatory application of the root cohesion, which considers changes in the vegetation condition, and the selection of the flow direction method may influence the accuracy of landslide predictive modeling. In the future, the results of this study should be verified by examining the root cohesion and its dynamic changes according to the tree species using the field hydrological monitoring technique.

• Journal of Venture Innovation
• /
• v.4 no.2
• /
• pp.97-108
• /
• 2021

Labor contracts appear in form as an exchange relationship between labor products and wages, but since they transcend the level of simple barter, they can be economically identified as "trading" and can be identified as "rental." From a legal point of view, a legal device that legally supports and imposes binding force on commodity exchange relations is a contract. Such a labor contract led to a relationship in which wages were received and a certain amount of time was placed under the direction and supervision of the employer as a counter benefit to the receipt of wages. Since working hours are subordinate hours with one's labor under the disposition authority of the employer, long hours of work can be done for the health and safety of workers and furthermore, it can be an act that violates the value to enjoy as a human being. The reduction of working hours needs to be shortened in terms of productivity and enjoyment of workers' culture so that they can expand and reproduce, but users' corporate management labor and production activities should also be compatible compared to those pursued by capitalist countries. Working hours can be seen as individual time and time in society as a whole, and long hours of work at the individual level are reduced, which is undesirable at the individual level, but an increase in products due to an increase in production time at the social level can help social development. It is necessary to consider working hours in terms of finding the balance between these individual and social levels. If the regulation method of working hours was to regulate the total amount of working hours, flexibility and elasticity of working hours are a qualitative regulation method that allows companies to flexibly allocate and organize working hours within a certain range of up to 52 hours per week. Accordingly, it is necessary to shorten working hours, but expand and implement the flexible working hours system according to the situation of the company. To this end, it is necessary to flexibly operate the flexible working hours system, which is currently limited to six months, handle the selective working hours by agreement between employers and workers, and expand the target work of discretionary working hours according to the development of information and communication technology and new types based on the 4th industrial revolution.