• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.215-223
• /
• 2012

This study was performed to investigate hygienic behavior of food workers on the awareness of hand-washing, and the microbial load of their hands. This study focused on the comparison of fast food restaurant workers and full-service restaurant workers. A questionnaire survey and microbiological analysis were carried out for thirty fast food restaurant workers and forty full-service restaurant workers. Samples for microbiological analysis were collected through the glove-juice method from the hands of the food workers, and were analyzed for the presence of aerobic plate counts, total coliforms, fecal coliforms, Escherichia coli, Staphylococcus aureus, and Salmonella spp. Microbiological analysis was done according to the Food Code of Korea. In the survey, significant differences (p < 0.05) were found between the fast food restaurant workers and full-service restaurant workers in the use of hand washing tools and method of turning off water. More full-service restaurant workers responded to wash their hands after touching face, hair, or clothes; after handling raw food materials, and more fast food restaurant workers periodically (p < 0.05). Aerobic plate counts were higher in fast food restaurant workers while total coliforms were higher in full-service restaurant workers (p < 0.05). No remarkable difference was found between the two groups in the load of fecal coliforms, E. coli, S. aureus, and Salmonella spp. Poor hand hygiene practices were indicated by the positive results for E. coli, S. aureus, and Salmonella spp. on the hands of some food workers in both groups. The findings of this study emphasize the need for strict adherence to hand hygiene compliance among the food workers.

• Journal of the Korean Institute of Gas
• /
• v.14 no.1
• /
• pp.28-36
• /
• 2010

We have garnered 3,593 data of gas accidents reported for 12 years from 1995, and then analyzed the LPG vaporizer accidents according to their types and causes based on the classified database. According to the results the gas rupture has been the most common accident followed by the release, explosion and then fire accidents, the most frequent accident-occurring sub-cause is LPG check floater faults. In addition, we have applied the Poisson Probability Functions to predict the most-likely probabilities of fire, explosion, release and rupture with the LPG vaporizer in the upcoming 5 years. In compliance with Poisson Probability Functions results, in the item which occurs below 3 "LPG-Vaporizer-Fire", in the item which occurs below 5 "LPG-Vaporizer-Products Faults-Check Floater" and the item which occurs below 10 appeared with "LPG-Vaporizer-Products Faults". From this research we have assured the successive database updating will highly improve the anticipating probability accuracy and thus it will play a key role as a significant safety- securing guideline against the gas disasters.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.425-435
• /
• 2014

Objectives: This study was performed in order to establish reliable and relative selection criteria for hazardous substances requiring management(HSRM) in the Occupational Safety and Health Act in Korea. Methods: To determine the relative criteria and weight of evidence for HSRM, we analyzed the difference between the selection method of priority substances in studies by KOSHA(Korea Occupational Safety and Health Agency) and the European Union Risk Ranking Method(EURAM). In addition, 597 hazardous substances with exposure limit valueswereanalyzed and the posted health hazards classification by MOEL(Ministry of Employee and Labor), MOE(Ministry of Environment), and EU CLP(Classification, Labelling and Packaging regulation) were compared based on GHS(Globally Harmonized System of classification and labelling of chemicals) criteria. The existing HSRM(167 substances) were evaluated for suitability by the proposed criteria in this study. Results: As a result of this study, the criteria and procedures for selecting HSRM in the Occupational Safety and Health Act were arranged utilizing GHS health hazard classification results, occupational disease cases and domestic use situations. Conclusions: The applicability of the proposed criteria was proved via the evaluation of existing HSRM(167 substances). Most HSRM (161 substances) were found to correspond to a significant health effect or substantial health effect. The question of whether to include the six substances that have been found to have general health effects as HSRM would be require further research.

• Korean Journal of Agricultural Science
• /
• v.26 no.1
• /
• pp.6-11
• /
• 1999

This experiment was carried out to estimate the appropriate seedling stand and to find out the factors of good establishment and the reason of the reduction of yield by water foxtail. The seedling stands was improved by the ice straw mulching and treading by the tracks of combine. The effect of mulching was higher than the treading. The appropriate seedling stands for example yield were estimated about 507 plants per $m^2$ and its yield was 24kg/10a. The higher density of water foxtail, the less the grain yield; 21.8% by 17 to 22 water foxtail stands per $m^2$ and 11.0% by 6 to 11 plants.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.167-171
• /
• 2014

Hydrofluoric acid (HF), a typical inorganic acid, has been used in the industry for its various usage and classified as the toxic compound, because it can cause the pneumonia and pulmonary edema when it was exposed to respiratory organs. The official environmental analytical method for fluorine and its compound in waste has not been developed. For this reason, we have faced some problem to treat the contaminated wastes by the HF leakage from industrial process. In this study, prepared for analytical method for combustible waste (crop, trees, etc.) generated from HF leaking accident and to be applied as the official analytical method for fluorine contaminated waste when the fluorine and its compound will be regulated as a hazardous material by the waste management law later.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.137-147
• /
• 2013

Objectives: This study was conducted in order to evaluate the limitations of the regulations on the safety and health standards for special management materials(SMM) under the Industrial Safety and Health Act in Korea. Methods: Hazardous chemicals management systems in Germany(Hazardous Substances Ordinance), the UK(Control of Substances Hazardous to Health Regulations), Japan(Ordinance on Prevention of Hazards due to Specified Chemical Substances) and Korea(Regulation of Occupational Safety and Health Standards, ROSHS) were investigated and compared in terms of 14 items. Results: Among the 14 items, we eventually found seven items which should be amended: 1) definition and scope, 2) general duties clause, 3) principles of management, 4) preventive measures, 5) control measures, 6) risk assessment, and 7) record keeping. The principal limitations of Korean regulations in comparison with those of other countries were that there were no preventive measures such as substitution, and no principles of good practices for the control of exposure to SMM. In terms of control measures, there were no regulations on suitable workplace design, reducing the number of exposed workers, reducing the level and duration of exposure, and reducing the quantity of hazardous substances in ROSHS. Conclusions: Based on the results of this study, ROSHS should be complemented with preventive measures and the principles of management related to SMM. According to the suggestions, an employer who deals with SMM should preferably consider the possibility of substitution and perform substitution so far as is reasonably practicable.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.2
• /
• pp.86-94
• /
• 1996

In the life management safety evaluation of constructs base on a fracture mechanics, the size of defect is the very important parameter. ICFPD (Induced Current Focusing Potential Drop)technique has been developed for detecting and sizing of defects that exist not only on surface but also inside and interior of structural components. The principle of this technique is to induce a focusing current at an exploration region by a straight induction wire through which an alternating current (AC)flows that has constant amplitude and frequency. The potential distributed on the surface of metallic material is measured by potential pick-up pins that are settled on the probe. In this paper, this NDI technique was applied to the evaluation of surface cracks and blind cracks in plate specimens. The results of this study show that in the case of surface crack, the distribution of potential drop is varied with the inched angle of surface crack, and the potential drops in the crack region and the crack edge region are varied with the inclined angle and depth of crack. The distribution of potential drop for the blind crack is distingulished from that for the surface crack, and the potential drop in the crack region is varied with the depth of crack.

• Convergence Security Journal
• /
• v.14 no.3_2
• /
• pp.93-98
• /
• 2014

In a recent survey conducted among Seoul citizens, the demand for crime prevention in addition to settlement of environmental problem and traffic system improvement turned out to be the highest. In particular, the demand for prevention of crimes in residential areas was higher than any other items. The crime rates are especially high in deteriorated residential districts, which indicates the relation between crimes and physical environmental factors. In other words, proper measures for surroundings can prevent crimes. While there may be various ways to keep the residents from crimes safely, CPTED, a crime preventive method in a way of improving the physical surroundings is one of the most noteworthy solutions. The principles of CPTED involves the basic principles such as Natural Surveillance, access control, and securing of territoriality and additional principles of strengthening of Activity Support and Maintenance & Management. This study aims to present a method to lower and prevent crime occurrences by applying the principles of CPTED in deteriorated Apartment Housing in the middle of a city.

• Journal of the Korean Institute of Gas
• /
• v.15 no.4
• /
• pp.27-32
• /
• 2011

Management of gas safety is becoming important with increasing use of gas facilities. U-safety system is being promoted as part of national management of gas, and thus real-time and in-situ gas sensor should be developed. Detection method for When the gas sensor is installed in gas conduit, explosion may be likely, because hydrocarbon gases is usually used the difference of thermal resistance between reference and working electrode. Therefore, it is required to detect the hydrocarbons, such as $CH_4$ and CO, at room temperature via electrochemically catalytic reaction. In this study, Pt nanoparticle was doped on the porous gold powder by electrolytic plating method, and then it was used as catalytic electrode for CO oxidation. For Pt/PAu electrode, approximately 21% of CO conversion was obtained. It is noted that Pt/PAu electrode could be used to react the oxidation of hydrocarbon gases at room temperature via applying of external voltage.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1191-1202
• /
• 2013

The former researches on earthwork automation were mainly focused on GPS and sensor application, environment modelling, equipment path planning, work information management, and remote control etc. Recently, reducing $CO_2$ emission becomes one of main focuses for an automation research. In the case of earthwork operations, many kinds of construction machines or robots are involved, which can cause high level of $CO_2$ in a construction site. An effective earthwork plan and construction machine operation can both increase productivity and safety and decrease $CO_2$ emission level. In this research, some automation concepts for green earthworks are suggested such as a 3D construction site model, a 3D earthwork distribution based on two different earthwork methods, and an earthwork package construction method. A excel-based simulator is developed to generate the 3D earthwork distribution and to estimate the level of $CO_2$ emission for the given earthwork.