• Nuclear Engineering and Technology
• /
• v.7 no.3
• /
• pp.243-256
• /
• 1975

1. 기초실험 1) 안전성의 검토 대형고속로의 안전성확보를 위한 Doppler효과, Na void 효과 등의 검토 2) 노심의 제특성 측정 청계질양, 비균질효과, 중성자내분포, 중성자 energy 분포, 제물광의 반응도채치, 증식비, Doppler계수, Na의 void 계수 3) 중성자 energy 측정법의 확립 대형노심에 었어서의 중성자 spectrum을 정도높게 정하는 것은 고속노물리자험의 전제조건이 되는 동요한 역천이다, 현재로서는 측정기, 긴정법자체가 업분치 못하기 때문에 많은 연구가 필요하다. 4) 고원여심의 군정수 정비 고동로심의 군정수가 정비 확립 안된것이 계산신업가 낮은 원인이 되고 있기 때문에 제채험의 결과와 대조하여 신뢰성있는 군정수를 정비하여 고속노설계에 양지를 시공한다. 5) 동특성 및 Pulse 체험원자로 내전운전과 핵연료의 효율적인 연소관리를 위한 동특실험과 Pulse 실험을 행하여 동특성해석을 한다. 2. 핵적 Mock-up 실험 관발 건조하고져하는 책험노, 원형노, 책용노의 대심을 모남하여 제물리적인 Parameter를 측정, 최적화를 수행한다.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.149-156
• /
• 2008

A reliability model of Level II AFDA is developed to analyze the stability of armor units on the sloped coastal structures. Additionally, the partial safety factors of random variables related to armor units can be straightforwardly evaluated by applying the inverse-reliability method in which influence coefficients and uncertainties of random variables, and target probability of failure are combined directly. In particular, a design equation for armor units is derived in terms of the same criteria as deterministic design method in order to apply the reliability-based design method of Level I without some understanding to the reliability analysis. Finally, it is confirmed that several results redesigned by the reliability-based design method of Level I have satisfactorily agreement with results of CEM as well as those of Level II AFDA.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.157-165
• /
• 2008

Level II AFDA and Level III MCS reliability models are applied to analyze the stability of armor units on trading and coastal harbors in Korea. Hudson's formula and Van der Meer's formula are used in this reliability analysis. Also, probability density functions of reliability index and probability of failure are derived by the additional analysis. In addition, the partial safety factors of all harbors related to armor units can be straightforwardly evaluated by the inverse-reliability method. The upper and lower limits and average level of partial safety factors can be statistically investigated with the results of all cases applied in this paper. Therefore, it may be possible to design armor units of new breakwaters including the uncertainty of random variable and target level by using the present results.

• Journal of Korean Society of societal Security
• /
• v.2 no.4
• /
• pp.59-65
• /
• 2009

The rebound test using Schmidt hammer is most popular method to estimate strength of concrete. However, this method is inappropriate for Seoul Metro underground structures due to unsuitable aging effects. Consequently, the strength presumption equation of underground structures is proposed according to the correlation of uniaxial compressive strength, rebound test results and age of concrete. To achieve this, the results of in-depth inspection of Seoul Metro underground structures performed annually for last 8 years was anlayed.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.470-479
• /
• 1993

노심설계의 검증을 통하여 설계의 신뢰성이 확인되며 이는 발전소 운전의 안전성과 경제성을 향상시킬 수 있는 발판이 된다. 본 기고문은 국산핵연료가 장전되었던 영광 2호기 4주기의 운전자료 중에서 핵설계와 관련한 인자의 측정치를 설계치와 비교 분석하고 평가하였다. 비교대상이 된 핵 특성인자는 반응도 관련 자료인 임계붕소농도, 제어봉가, 등온온도계수 및 감속재온도계수 둥이고 출력분포 관련자료인 핵반응률 분포, 집합체 출력분포, 반경방향 첨두출력 F_ $\Delta$H/$^{N}$ , 축방향 출력분포, 축방향 첨두출력 Fq(z) 및 노심 평균 축방향 출력편차(AO)등이다. 이들 인자들에 대한 설계치는 측정치와 잘 일치하였으며, 모두 안전성 관련 제한치이내로 만족함을 확인하였다. 또한 운전자료의 비교 분석을 통하여 후속주기의 핵설계에 반영할 수 있는 근거를 마련하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.99-105
• /
• 2005

To evaluate structural safety factor of the jet vane for the thrust deflection system under the dynamic pressure and very high temperature($2700^{\circ}C$) of the combustion gas flow, the high temperature tension tests of refractory metals and 3-D nonlinear numerical simulations are performed. Through the analysis of high temperature structural behavior for jet vane, the structural safety of jet vane is evaluated, and numerical results are compared with static pound tests of jet vanes. It has been found that most of structural and thermal loading is concentrated on the vane shaft which worked as safe under $1400^{\circ}C$. From the comparison of static ground tests and numerical results, the evaluation criterion using the vane load and shaft displacement is more useful to estimate the structural safety than using the equivalent stress.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.983-988
• /
• 2009

When the railway vehicle passing through curves & transitions, the running speed must improve by proposing the practical standard about maximum running possibility speed of each section on existing line considering running safety. In this paper, when the railway vehicle passing through curves of actual track conditions (Namsunghyun-Chungdo up & down lines), the effect that has influence on running safety is examined to devise the high speed of vehicle which passing through curves which risk of derailment is high. The running safety analysis is performed that running speed by curve radius improves 5-20% compared with existing speed under actual track conditions. In result of the running safety analysis, in case the speed condition is fewer than 15% compared with existing speed, the derailment coefficient and unloading ratio are within acceptable level. so we could confirm possibility of speed improvement on the whole Namsunghyun-Chungdo up & down lines.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.3
• /
• pp.53-64
• /
• 2013

The car-following model is one of core models in Advanced Vehicle & Highway Systems (AVHS). The car-following model has been developed in aspects such as human factor and reduction error rates. However, the consideration of safety depending on weather condition has not been completed yet. In this paper, therefore, changes of driving condition for car-following due to different road condition were dealt with, and optimal safety distance corresponding to road condition such as dry, wet and snowy were computed. The GMIT(GM Model with Instantaneous T) model was picked over for simulation of adaptive cruise control applied the suggested optimal safety distance. As the results, the 1.7 times longer safety distance was required for wet road condition than dry road condition, and the 5.6 times longer safety distance was required for snowy road condition.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.18-24
• /
• 2005

To evaluate structural safety factor of the jet vane for the thrust deflection system under the dynamic pressure and very high temperature(2700$^{\circ}C$ ) of the combustion gas flow, the high temperature tension tests of refractory metals and 3-D nonlinear numerical simulations are performed. Through the analysis of high temperature structure behavior for jet vane, the structure safety of jet vane is evaluated, and numerical results are compared with static ground tests of jet vanes. It has been found that most of structural and thermal loading is concentrated on the vane shaft which worked as safe under 1400$^{\circ}C$. From the comparison of static ground tests and numerical results, the evaluation criterion using the vane load and shaft displacement is more useful to estimate the structural safety than using the equivalent stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3035-3043
• /
• 2015

This study evaluates the thermal structural safety of the three-way catalyst(TWC) substrate for domestic passenger cars. Thermal-fluid boundary conditions on the TWC substrate were determined by D-optimal DOE. The thermal stresses on the TWC substrate were calculated by the temperature distribution obtained from the CFD results. The safety factors of the TWC substrate were determined by statistical strength and stress distributions and estimated to be 0.275. The thermal stresses for TWC substrate exceeded the strength of the material. Therefore, it is necessary to redesign the TWC substrate because it has much shorter service life than design life.