• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.599-602
• /
• 2002

A novel rapid prototyping (RP) process, an automated transfer type variable lamination manufacturing process (Automated VLM-ST) has been developed. In Automated VLM-ST, a vacuum chuck and linear moving system transfer the plate type material with two pilot holes to the rotation stage. A four-axis synchronized hotwire cutter cuts the material twice to generate Automated Unit Shape Layer (AUSL) with the desired width, side slopes, length, and two reference shapes in accordance with CAD data. Each AUSL is stacked on the stacking plate with two pilot pins using the pilot holes in AUSL and the pilot pins. Subsequently, adhesive is supplied to the top surface of the stacked AUSL by a bonding roller and pressure is simultaneously applied to the bottom surface of the stacked AUSL. Finally, three-dimensional shapes are rapidly fabricated. This paper describes the procedure for generating the cutting path data (AUSL data) f3r automated VLM-ST. The method for the generation of the Automated Unit Shape Layer (AUSL) in Automated VLM-ST was practically applied and fabricated for a various shapes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.274-278
• /
• 2002

Surface finishing is still indispensable for most rapid prototyping (RP) processes because of the inherent stair-stepped surface and shrinkage of the parts. These problems can be minimized in the $VLM-_ST$ Process, because it uses expandable polystyrene foam sheets, each of which has a thickness of3.9 mm and a linear-interpolated side slope. The use of thick layers, however, limits the process capability of constructing fine details. This study focuses on the design of post-processing tool for fine details of $VLM-_ST$ parts and investigation of thermal characteristics during EPS foam cutting using the post-processing tool. To calculate the heat flux from the tool into the foam sheet, the tool was modeled as a heat source of radiation for finite element analysis. Results of the analysis agreed well with those of the experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.176-180
• /
• 2002

All types of VLM-s process include the linear heat cutting of EPS foam to generate a layer with 3D shape. The dimensional accuracy and part quality of the cut part are dependent on the thermal characteristics in the EPS foam. The thermal characteristics are determined by operating parameters such as an effective heat input and cutting angle. The objective of this study is to investigate into the influence of cutting angle on the kerfwidth and the melted length of the cut part using the numerical analysis and the experiments in generally sloped cutting with two cutting angles. In order to estimate an accurate temperature field, the transient thermal analysis using moving coordinate system, the fully conformed mesh and the heat flux model with two cutting angles is carried out. From the results of the analysis and the experiments, it has been found that the influence of the rotational angle about x-axis in which the rotational axis is normal with hotwire cutting direction is appreciably negligible in comparison with that of the rotational angle about y-axis.

• Journal of Korean Society on Water Environment
• /
• v.30 no.5
• /
• pp.477-485
• /
• 2014

Imha Reservoir is connected to Andong Reservoir via a diversion tunnel allowing water to pass between. The diversion tunnel is equipped with screens to exclude exotic largemouth bass due to their predatory impacts on prey assemblages resulting in a degradation of species richness of local fish fauna and extinction of local fish populations in Korea. Flow pattern changes resulting from the fish screens and trash racks were investigated using a computational fluid dynamics (CFD) model. Numerical simulations showed that the decrease in the discharge capacity of the tunnel is approximately 8.6% and the headloss coefficient for fish screen at Andong intake tower was determined to be 1.5. In order not to allow the small fishes enough to pass through the wire openings enter into Imha Reservoir through tunnel, the velocity in the tunnel should be greater than 1.48 m/s which is a critical ascending velocity of the bass. This study suggests that it can keep the velocity higher enough to exclude largemouth bass when a gate opens with the condition of 1.0m difference in water stage between two reservoirs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2184-2196
• /
• 1998

Admission control is one of the most important congestion control mechanism to be executed at the call set up phase by regulating traffic into a network in a preventive way. An efficient QOS evaluation or bandwidth estimation method is required for call admission to be decided in real time. In this paper, we spropose a computtionally simple approximation method of estimating cell loss probability and mean cell delay for admission control of both delay sensitive and loss sensitive calls. Mixed input queueing system, where a new call combines with the existing traffic, is used as a queueing model for QOS estimation. Also traffic parameters are suggested to characterize both a new call and existing traffic. Aggregate traffic is approximated by a renewal process with these traffic parameters and then mean delay and cell loss probability are detemined using appropriate approximation formulas. The accuracy of this approximation approach is examined by comparing their results with exact analysis or simulation results of vrious mixed unput queueing systems. Based on this QOS estimation method, call admission control scheme which is traffic independent and computable in yeal time are proposed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.16-19
• /
• 2001

Rapid Prototyping (RP) and Rapid Tooling (RT) were introduced to reduce time-to-market and cost by shortening not only the development phase but also the production phase of the manufacturing process. RP generally builds up a prototype layer by layer, rapidly generating a fully three-dimensional free form shape. RT enables the manufacture of production tools. The integration of RP and RT has the potential for rapid net shaping of thee-dimensional parts, which have geometrical complexity. In this study, net shaping techniques for making three-dimensional parts using RP and RT are described and a sample part are shown. A three-dimensional metal part is manufactured by a new RP process, Variable Lamination Manufacturing by using Expandable Polystyrene Foam (VLM-S), and its application to RT for making a clover punch. In addition, we discussed the technology fusion between metal forming md RP/RT.

• Journal of Aquaculture
• /
• v.22 no.1
• /
• pp.16-22
• /
• 2009

Life history of Korean crayfishes Cambaroides similis (Koelbel) was studied 8 month from March to October, 2006 from the Gwanak mountain, Seoul, South Korea. By capture and recapture method, 551 crayfishes were collected analyzed during the experimental period. Based on the distribution pattern of body lengths, the local population putatively divided into four age groups. The sex ratio of male and female was almost equal. However, their growth rates varied by water temperature. Early juveniles seen during June became adult during August. The study findings suggest that late autumn is mating season.

• The KIPS Transactions:PartB
• /
• v.11B no.5
• /
• pp.537-544
• /
• 2004

The Web is rich with various sources of information. Due to the massive and heterogeneous web document collections, users want to find various types of target pages. Each type of information for Web search has designated queries. If a user query is not a designated query, then we cannot have good result documents. Different strategies are needed to utilize the goodness of each type of information for a search engine. If we know the property of information, then we can refine candidate pages and rank them delicately. Various experiments are conducted to show the properties of each type of information. Therefore, we show an appropriate combining formula to utilize the properties of each type of information. In addition, for a service finding task, we propose Service Link Information that utilizes the existence of mechanisms for a user interaction.

• KSBB Journal
• /
• v.7 no.1
• /
• pp.27-31
• /
• 1992

Xylose represents a major component of cellulosic materials. This paper describes patterns of ethanol fermentation by Saccharomyces cerevisiae from xylulose, which is an isomer of xylose. Special emphasis was placed on the effects of xylulose concentration and growth temperature on cell growth and ethanol yield. The maximum specific growth of $0.087 1/hr^{-1}$ was obtained at an initial xylulose concentration of 5 g/1. The ethanol yield was propotional to initial xylulose concentrations. A xylulose concentration of 16 g/l resulted in the maximum ethanol yield of 0.49 g EtOH/g xylulose, which corresponds to 90% of a theoretical value. It is interesting to nota that xylulose metabolism was accelerated by the presence of glucose as a carbon source.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.3
• /
• pp.148-156
• /
• 2002

Most Rapid Prototyping (RP) processes adopt a solid Computer Aided Design (CAD) model, which will be sliced into thin layers of constant thickness in the building direction. Each cross-sectional layer is successively deposited and, simultaneously, bonded onto the previous layer; and eventually the stacked layers from a physical part of the model. A new RP process, the transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), has been developed to reduce building time and to improve the surface finish of parts with the thick layers and a sloping surface. This paper describes the generation of Unit Shape Layer (USL), the cutting path data of the linen. hotwire cutter for the VLM-ST process. USL is a three-dimensional layer with a thickness of more than 1 mm and a side slope, and it is the basic unit of cutting and building in the VLM-ST process. USL includes data such as layer thickness, positional coordinates, side angles of each layer, hotwire cutting speed, the heat input to the hotwire, and reference shape. The procedure of generating USL is as follows: (1)Generation of the mid-slice from the CAD model, (2)Conversion of the mid-slice into a simply connected domain, (3)Generation to the reference shape for the mid-slice, (4)Calculation of the rotation angle of the hotwire of the cutting system.