• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.249-258
• /
• 1998

This study was researched the state and problem of the soft contact Lens wear by the history and inverted microscopy. The results was as follows; 1. The first use of contact lens wear was the 15 years and the last use was the 26 years. The first age of most contact lens wear was the 19 years. 2. In the almost contact lens wearers, the first visual test was the optical shop. 3. At present, almost soft contact lens purchase the optical shop 4. At present, most contact lens wearer like a soft type. 5. At present, most soft contact lens were a domestic production, and some subjects were foreign country production, but some subjects were unknown. 6. After contact lens wear, most subjects don't known the corrected visual acuity, especially, almost people don't known the binocular visual acuity. 7. At present, on soft contact lens color, the teens like the non-color contact lens, twenties like the color contact lens, but thirties was not known. 8. On the advantage of soft contact lens knowledge, most teens and twenties were only one, thirties was unknown. 9. On the disadvantage of soft contact lens knowledge, most teens and thirties were only one, twenties were two. 10. On the side effect of soft contact lens wearer, teens was one, and twenties and thirties don't known. 11. On the main symptoms of soft contact lens wearer, total kinds were seven, On these kinds, most subjects were not symptoms, the next order was unknown on the symptom. But, On the symptoms, the main symptoms was the pain and dry eye. 12. At present, the research on the surface morphology of soft contact lens by inverted microscope, the lens repture, lens folding, foreign body immersion and etc were present. Above the study, most contact lens was soft lens, and the purchase was the optical shop, on the other hand, the knowledge of soft contact lens and visual acuity was few. As a results, On the practical problems of soft contact lens wear, the optician have to the soft contact lens treatment and aftercare by law and educational supporting.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.217-223
• /
• 2006

The purpose of this study is to provide improvements and standards of trial lens, in a situation that there is a lack of standards of trial lens set that have been used for self-conscious refraction test after helm refraction test at about 5,000 opticians, ophthalmologic clinics and hospitals, and contact-lens shops, that there is a lot of discrepancies between refraction specified and the actual power, and that there is no regulation of optical tolerance error. For the study, opticians who have used Trial lens set were asked to participate in a questionnaire survey through continuing education, and divided into those who have used domestic lens and those who have used imported lens, 5 opticians each for less than 5 years, 5 to 10 years, more than 10 years. The measurement of both refraction specified and the actual diopter was compared to Japan Industrial Standards(JIS T4402). As a result of comparative analysis, more than 80% of respondents have had reliability on the refraction of trial lens they had used, indicating that they have never measured the refraction specified and the actual diopter after buying them. Besides, Korean Industrial Standards(KS P4402) has been imperfect in diopter range since it was legislated in 1979. More than 95% of respondents have been unsatisfied with optometry. Also, it has indicated that refraction error is more frequent in long-term-used trial lens. The conclusion is that it is necessary to standardize trial lens set and that it is required to add lens to lens set provided under KS P4402. Moreover, it is necessary to have supervisory agency for a standardization of trial lens. I hope that both domestic lens and imported lens, as in German and Japan, will be tested to find whether they meet optical tolerance error and standard trial lens will be distributed. Good optic inspection is required for the improvement and management of eye health and optical function, and the same standard trial lens set should be used. whoever is tested. Also, I hope that trial lens set will be specified within standards and tolerance error.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.145-150
• /
• 1998

To 160 persons(90 men, 70 women) who went to the national hospital of Solok-island with Hansens's disease, I tested the objective refracts test with the product of Cannon Ltd. Co. which RK-3 Auto Ref-keratometer's auto ophthalmoscope. The results were like these. Visual acuity of above 0.7 that can live without glasses was contained 44 men's eyes(24.4%) and 19 women s eyes(13.6%). These result are indicated that men have had more good visual acuity than women. Visual acuity of below 0.6 that cannot do normal life was contained 80.3% of the total patients. And amblyopia of below 0.3 and eyes which cannot be corrected were shown 44.4%(80 men's eyes and 55.7% 78 woman's eyes). Myopia was contained 119 eyes(43), hyperopia was contained 139 eyes (50.4%) and emmetropia was 6.5%. Astigmatism was shown 136 men s eyes (86.6%) and 97 women's eyes(81.5%). These results are indicated what many people accompany with astigmatism. And these ratio had some high percentages men rather than women. Direct astigmatic was contained 37 eyes (11.6%), Indirect astigmatic 81 eyes(25.3%) and Oblique Astigmatic 115 eyes(35.9%). As a of distributed result oblique astigmatic occupied best high point as 49.4% in 233 astigmatism and distributed the opposite direction as compared with normal irregular emmetropia not patient.

• Korean Journal of Ichthyology
• /
• v.19 no.2
• /
• pp.128-131
• /
• 2007

Head length, snout length, postorbital length, and eye diameter were measured in 209 brown croaker, Miichthys miiuy, ranging from 3.0 to 650.0 mm in total length (TL). All of the four head dimensions were regressed against the TL respectively and were increased linearly with the relative size of the head. The determination coefficients ($r^2$) ranged from 0.9823 to 0.9916, and all analysis of variance values were significant (P<0.0001). Those results suggest that these head dimensions may be useful indicators for detecting morphological deformities or for individual and population growth histories to aid in the successful rearing of brown croaker fingerlings.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.434-443
• /
• 2011

The purpose of this paper is to suggest more effective interpretation method to enrich visitors' satisfaction and attitudes on cultural heritage. The paper examined the difference of interpretation effectiveness and the relationship of interpretation attributes and visitors' satisfaction and attitudes on cultural heritage according to the type of interpretation media. The result of empirical analysis shows that there is significant difference of interpretation attributes, visitors' satisfaction and attitudes on cultural heritage according to interpretation media type. Also the different interpretation attributes have effects on visitors' satisfaction, and the degree of effect of each attribute on attitudes on cultural heritage are different according to interpretation media. Most important and meaningful finding is that educational interpretation is also necessary to enhance visitors' behavior to cultural heritage preservation as well as interesting and effective interpretation have strong impacts on visitors' satisfaction. Other implications are also suggested.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.3
• /
• pp.162-168
• /
• 2017

Shallow-water bathymetry survey has been conducted using high definition color images obtained at the altitude of 100 m above sea level using a drone. Shallow-water bathymetry data are one of the most important input data for the research of beach erosion problems. Especially, accurate bathymetry data within closure depth are critically important, because most of the interesting phenomena occur in the surf zone. However, it is extremely difficult to obtain accurate bathymetry data due to wave-induced currents and breaking waves in this region. Therefore, optical remote sensing technique using a small drone is considered to be attractive alternative. This paper presents the potential utilization of image processing algorithms using multi-variable linear regression applied to red, green, blue and grey band images for estimating shallow water depth using a drone with HD camera. Optical remote sensing analysis conducted at Wolpo beach showed promising results. Estimated water depths within 5 m showed correlation coefficient of 0.99 and maximum error of 0.2 m compared with water depth surveyed through manual as well as ship-board echo-sounder measurements.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.227-235
• /
• 2021

The purpose of this study was to investigate the association factors of dental infection control by applying the health belief model in the dental hygienists. This study subject was 142 dental hygienists from 15 to July 5, 2020. Data were analyzed by chi-square test ANOVA, correlation analysis, and multiple regression analysis using SPSS version 23.0. The performance of dental infection control in accordance with the general characteristics of research subjects was high in case when they had educational experiences of infection control, and when they 'always' did medical examinations by interview about infectious diseases(p<0.01). The group of dental hygienists working for dental clinics with less than average 50 patients a day showed the highest rate of wearing a mask and latex gloves as personal protective gears(p<0.05),(p<0.01). When the wearing of protective goggles(face shield) and the frequency of exchanging masks after the outbreak of COVID-19 were more, the performance for infection control was increasing(p<0.05),(p<0.01),(p<0.001). In this study, it is difficult to generalize the results of the study because the research area and the subject are limited by selecting the subjects by convenience extraction, and focusing on the degree of awareness of infection control by dental hygienists, the actual status of infection control in dentistry is carefully illuminated. What you didn't do can be seen as a limitation. Considering the results of this study, the performance of infection control could be increased by removing obstacles and increasing the importance and perceived benefits of infection control of dental hygienists.

• Journal of the Korean Vacuum Society
• /
• v.7 no.4
• /
• pp.403-409
• /
• 1998

In this study, the effects of multi-dipole type of magnets on the characteristics of the inductively coupled plasmas and $SiO_2$ etch properties were investigated. As the magnets, 4 pairs of permanent magnets were used and, to etch $SiO_2, C_2F_6, CHF_3, C_4F_8, H_2$, and their combinations were used. The characteristics of the magnetized inductively coupled plasmas were investigated using a Langmuir probe and an optical emission spectrometer, and $SiO_2$ etch rates and the etch selectivity over photoresist were measured using a stylus profilometer. The use of multi-dipole magnets increased the uniformity of the ion density over the substrate location even though no significant increase of ion density was observed with the magnets. The use of the magnets also increased the electron temperature and radical densities while reducing the plasma potential. When $SiO_2$ was etched using the fluorocarbon gases, the significant increase of $SiO_2$ etch rates and also the increase of etch uniformity over the substrate were obtained using the magnets. In case of gas combinations with hydrogen, $C_4F_8/H_2$ showed the highest etch rates and etch selectivities over photoresist among the gas combinations with hydrogen used in the experiment. By optimizing process parameters at 1000 Watts of inductive power with the magnets, the highest $SiO_2$ etch rate of 8000 $\AA$/min could be obtained for 50% $C_4F_8/50% H_2$.

• The Journal of Society for e-Business Studies
• /
• v.13 no.3
• /
• pp.121-135
• /
• 2008

Railroad logistics transporting freight by train takes charge of 10 or 20 percent of domestic cargos. Railroad logistics users such as transport companies including shippers or Inland Container Depot(ICD) use electronic document(EDI or XML) or input data through WEB to process railroad logistics business. However, as business environments evolving into e-business, it is required to upgrade the legacy railroad logistics process. As the increase of using ebXML-based schema format, it is also needed to improve the electronic documents based on DTD format into those of XML schema format. This study deals with information standard for railroad logistics to improve the railroad logistics business. To this purpose railroad business processes were re-defined through the standard business process modeling methodology. Information model was also derived by defining railroad logistics activities from business process model. And Business Information Entities(BIEs) were defined to design new electronic documents according to the extracted information model. An improved system architecture for railroad logistics was proposed as well. The results of this study will provide an effective and flexible business flow to railroad logistics business.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.123-130
• /
• 2016

High-frequency induction heating equipment can heat the metal by applying a High-Frequency power to the resonant circuit. The resonance circuit is composed of the work coil and the conduction-cooled power capacitor, it influences the performance of the heat treatment equipment according to the characteristics of the capacitor. However, dependence on conduction-cooled power capacitor's import is high due to lack of core technology research and development. Minimizing the generation of internal heat transmitted inside during LC resonance, reduce the reactive power loss, there is a need for a capacitor within the voltage characteristic outstanding. To implement localization it is vital that prior study of the analysis on the frequency response characteristic for the finished capacitor advanced manufacturer be implemented. Studying the interpolation method to read the value at any point of the characteristic curve for a given log-log scale was applied to the analysis tool of the capacitor by my proposed algorithm. The simulation for reproducing frequency response curves was attempted by assuming a capacitor in a simplified series equivalent RC circuit to obtain the equivalent series resistance value. It was confirmed that the reproduction rate was the result value above 83% as compared to the simulation of the properties and characteristics on the actual reactive power for Peak value, and that the algorithm can be applicable when analyzing and predicting the characteristic curves of a simpled model capacitor.