• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.55-63
• /
• 1998

Among the position sensing methods available, the arc sensor which utilizes the electrical signal obtained from the welding arc itself is one of the most prevalently used methods, because it has an advantage that no particular sensing device is necessary and real-time sensing of a groove position is possible directly under the arc. The authors have already developed a seam tracking system that contains a new arc sensor algorithm, which uses the relative welding current variation according to the tip-to-workpiece distance in GMA welding. In this study a torch height control algorithm for automatic weld seam tracking was proposed for completing the previous system, which uses an on-off control technique. To implement the torch height control algorithm during weld seam tracking the system parameters which include 2nd averaging range, weighting factor for 2nd moving averaging, and Z-directional basic compensation distance were determined by experimental analysis. Finally the two different height control methods, one is simple on-off control and the other on-off control using a reference current value , were compared in their tracking abilities.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.129-140
• /
• 1998

An interface system was developed to offer the welding capability to a robot controller which had not any embedded function for arc welding before, and also an arc sensor algorithm was proposed for weld seam tracking of the welding robot. For the interface system between the robot controller and welding equipments, data communication software and interface connections were composed. The interface system was mae to correspond welding condition, correction data, operation sequence and current status with the robot controller by mutual had shaking and digital signal transfer. Graphic user interface program developed under the environment of windows made it easy to monitor data communication and operation status, and to control welding and sensing sequence. Arc sensing algorithm proposed in this study to compensate torch position error was based on a fuzzy logic with the variables of current difference and current differenced change at torch weaving extremities. The developed interface system could be successfully implemented in between welding equipments and the robot controller, and showed normal status and exact function in data and signal communication between the systems. The whole robot welding system was then examined to verify its welding and seam tracking capabilities in horizontal fillet, vertical fillet, and 3-dimensional fillet weldment. The experiments revealed sound weld bead shapes and also good seam tracing results.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.1-3
• /
• 2020

본 논문은 주파수 분석 방법 중 하나인 Discrete Wavelet Transform (DWT)을 활용하여 태양광 직렬 아크 사고를 검출하는 방법에 관하여 다룬다. DWT 알고리즘은 주파수 도메인에서도 시간 축 정보를 표현할 수 있어 기존의 Fast Fourier Transform (FFT) 주파수 분석 알고리즘과 차이점이 있으며, 대용량 태양광 시스템의 직렬 아크 사고 검출에 최적화 되도록 DWT 알고리즘의 속도를 향상시켜 태양광 DC 아크 사고 안전규격인 UL1699B의 요구 조건을 만족시켰다. DWT 알고리즘의 경우 TMS320F28033 기반으로 구현 되었으며 대용량 PV 시스템 적용을 위해 로고스키코일을 전류 센서로 사용하였다. 또한, 모의 DC 직렬 아크 발생 회로를 구축하여 제작한 사고 검출기의 성능을 실제 아크 발생 조건에서 검증하였다.

• Journal of Welding and Joining
• /
• v.13 no.1
• /
• pp.115-126
• /
• 1995

Vision sensors using the optical triangulation have been widely used for automatic welding systems in various ways, but their reliability is seriously affected by presence of the arc noise. The reliability of vision sensors was analyzed with variation of the arc noise by considering the reflectance of the base metal. first, the properties of the base metal's reflection were modelled by using the Bidirectional Reflectance-Distribution Function(BRDF), and then the variation of the reflected arc intensity was formulated for various configurations of the torch, base metal, and sensor. The experimental data of the gray level of the reflected arc light were obtained for two materials, mild steel and stainless steel. It was found that the results calculated from the proposed model were in good agreement with the experimental data.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.122-131
• /
• 1995

An automatic welding equipment for thick plates requires the capability of the seam tracking of the weld line which often includes misalignment of the workpiece and variation of groove width. In this study, an automatic welding equipment and control algorithms based on the arc sensor were proposed for the GMA welding of thick plates which had misalignment and gap variation. The developed system being constituted with 5 axis can be automatically controlled by computer and also automnatically set the welding conditions such as welding current, and voltage. The proposed algorithms for the seam tracking in multi-pass welding of the thick plates were constituted as follows : the detection of weaving-end point for findng the variation of groove width, the control of welding velocity for acquiring a constant thickness deposition of weld metal, and the calculation of groove width and height of an arbitrary pass in the multi-pass weld. As results of the application of the system, it was revealed that the system had a good capability in seam tracking and made an excellent weld quality in V groove butt joint.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.319-324
• /
• 2001

This paper presents the motion control of a mobile robot with arc sensor for lattice type welding. Its dynamic equation and motion control method for welding speed and seam tracking are described. The motion control is realized in the view of keeping constant welding speed and precise target line even though the robot is driven along a straight line or corner. The mobile robot is modeled based on Lagrange equation under nonholonomic constraints and the model is represented in state space form. The motion control of the mobile robot is separated into three driving motions of straight locomotion, turning locomotion and torch slider controls. For the torch slider control, the proportional integral derivative (PID) control method is used. For the straight locomotion, a concept of decoupling method between input and output is adopted and for the turning locomotion, the turning speed is controlled according to the angular velocity value at each point of the comer with range of $90^{\circ}$ constrained to the welding speed. The experiment has been done to verify the effectiveness of the proposed controllers. These results are shown to fit well by the simulation results.

• Journal of Welding and Joining
• /
• v.14 no.1
• /
• pp.15-23
• /
• 1996

용접은 힘든 작업환경 때문에 심한 인력난을 겪고 있는 3D 업종 중의 하나이 다. 특히 아크용접을 위해서는 숙련된 작업자가 필요하기 때문에 인력난은 더욱 심각 하다. 현장에서 젊은 작업자는 보기 힘들고 대부분의 작업자는 중년이상의 나이이다. 따라서 머지않아 많은 업체들이 인력난으로 조업을 중단해야 할 사태도 우려하지 않을 수 없는 형편이다. 이러한 문제점들을 해결할 수 있는 용접자동화는 최근 많은 관심을 끌고 있으며 이제 세계적인 추세가 되었다. 용접자동화의 이점은 무엇보다도 일정한 수준의 품질과 생산성에서 찾아볼 수 있다. 용접자동화에서는 가공자동화와는 달리 시스템의 자율성이 특히 중요하다. 작업조건의 설정, 용접봉의 위치와 방향 등은 전적 으로 컴퓨터와 센서시스템을 장착한 로봇에 의해 결정되어야 한다. 따라서 작업자들이 용접에 이용하는 각종 지능적인 능력을 습득하고 이를 각종 제어기와 센서로 모방하여 자율적으로 제어하는 인공지능기술을 응용하는 용접을 로봇의 개발에 관한 각종 연구 가 활발히 진행되고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.248-248
• /
• 2000

본 연구는 조선 소조립, 판넬조립 등의 공정에서 발생되는 필렛 용접 부위의 용접 자동화를 위한 로봇 시스템 개발에 관한 연구이다. 조선등의 중공업 분야에서는 작업이 중량이고 대형임에 따라 로봇이 부재의 특정위치로 이동하여 작업해야 한다. 또한 작업대상의 형상이나 치수가 매번 변경됨에 따라 이에 능동적으로 대처할 수 있어야 한다. 본 연구에서는 두 대의 로봇(2대x6축=12축)이 다축 문형 캔트리(4축)에 장착된 조선용 필렛용접 로봇 시스템(16축)을 개발하였다. 필렛용접부재를 중심으로 두 대의 로봇이 양쪽을 동시에 용접하는 방식으로 고속회전토치를 적용하여 위빙동작없이 원하는 용접각장(Leg Length)을 생성할 수 있다. 캔트리 시스템은 PC 기반의 별도 제어기로 구성하여 두 대의 로봇 제어기와 신호 입출력에 의해 동시동작이 가능하도록 하였으며, 작업장에 놓인 부재의 위치오차를 보장하기 위하여 시각센서를 적용하였다. 용접시작점의 위치보정을 위한 시작점 검출을 위해접촉센서(Touch Sensor)를 적용하였으며, 용접선 추적을 위해서 아크센서(Arc Sensor)를 적용하였다. 본 시스템 2000년 1월 제작 설치가 완료되어 현재 성능 테스트가 완료된 상태로 향후 생산현장에 적용될 계획이다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.95-100
• /
• 2008

Conventional Earth Leakage Circuit Breakers (ELCBs) have defects of a breaking failure or a long breaking-time against parallel arc current. In this paper, breaking characteristics of conventional ELCBs were analyzed by simulation of parallel arc in a low-voltage indoor wiring system, and an air-core current sensor and a signal converter being most available for parallel arc detection were developed and applied to a conventional ELCB. The proposed tripped the ELCB regardless of the location of parallel arc. The breaking-time was in ranges of $1.74{\sim}8.3[ms]$ depending on the phase of arc generation, which is about 5 times as fast as conventional ELCBs with the breaking-time of 50[ms].

• Proceedings of the KWS Conference
• /
• 2000.04a
• /
• pp.117-120
• /
• 2000