• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.84-91
• /
• 1997

Diamond film was deposited on Mo substrate at atmospheric pressure using a combustion flame apparatus with the addition of $H_2$. With the substrate temperature, the nucleation density of the substrate was increased. At temperatures above $1000^{\circ}C$, some of diamond was partly converted into graphite and etched by hydrogen atoms. With an increase of the $C_2H_2/O_2$ ratio, the nucleation density was increased. But crystals were cauliflower-shaped and a large number of amorphous carbon were deposited. With the addition of $H_2$, the nucleation density of diamond was increased by the improvement of surface activity. Diamond film of high crystallinity was deposited by etching amorphous carbon. With an increase of deposition time, the thickness of diamond film was increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.779-782
• /
• 2003

Hot filament 플라즈마 화학기상 증착법 (HFPECVD)를 사용하여 전처리 조건에 따른 탄소나노튜브의 성장 특성을 관찰하였다. 암모니아 ($NH_3$)를 희석가스로 사용하였고, 아세틸렌 ($C_2H_2$)를 탄소 원료가스로 각각 사용하였다. 암모니아 가스 플라즈마를 사용하여 전처리 된 니켈 촉매 층의 SEM (Scanning Electron Microscopy) 이미지를 관찰하여 본 결과, 나노 사이즈의 촉매 그레인(grain)을 발견할 수 있었다. 그리고 탄소 나노튜브의 직경과 성장 밀도 또한 전처리 된 촉매 층에 따라 다른 양상을 보였다. TEM (Transmission Electron Microscopy)를 사용하여 탄소나노튜브를 관찰한 결과 공동구조(hollow)를 한 다중벽 탄소 나노튜브(MWCNT)를 관찰할 수 있었다. 성장된 나노튜브는 끝에 금속팁을 가지고 있으며, 나노튜브의 팁은 촉매로 사용한 것과 같은 물질로 구성되어 있었다. Raman spectroscopy를 사용하여 측정된 B-밴드와 G-밴드의 피크들은 각각 $1360cm^{-1}$와 $1598cm^{-1}$ 부근에서 나타났으며, 전처리 조건을 달리하여 성장시킨 탄소나노튜브 필름에서 이들 두 피크의 위치는 이동하지 않았고, 두 피크의 강도 비율 ($I_G/I_D$)은 전처리 조건에 따라 변하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.133-133
• /
• 1999

비정질 탄소막 제조에 있어서 수소가 포함된 반응성 가스를 사용할 경우 제작된 탄소막 내부에는 수소가 포함되게 되며, 이러한 수소원자들은 막의 특성에 중요한 영향을 주는 것으로 알려져 있다. 따라서, 본 연구에서는 비정질 탄소막(a-C:H) 내부에 존재하는 수소가 탄소막의 특성에 미치는 영향을 알아보고, 막 내부에 포함된 수소의 함량과 공정조건 사이의 함수계를 조사함으로써 수소의 함량을 인위적으로 통제할 수 있는 가능성을 제시하고자 한다. 수소가 포함된 비정질 탄소막은 2.45 GHz의 전자기파를 사용하는 electron cyclotron resonance plasma enhanced chemical vapor deposition (ECR-PECVD) 방법과 DC magnetron sputtering 법을 사용하여 제작하였다. 기판으로는 Si(001) wafer를 사용하였으며, 아세톤과 에탄올을 사용하여 표면의 유기성분을 제거하고, 진공챔버속에서 Ar 플라즈마를 발생시켜 sputter etching 방법으로 표면을 세척하였다. ECR-PECVD 방법에서는 반응가스로 메탄(CH4)과 수소(H2)의 혼합가스를 사용하였으며, 혼합가스의 비는 5~50% 범위내에서 변화를 주었다. 수소가스의 유량은 100SCCM으로 고정하였으며, 마이크로웨이브의 power는 360~900W였고, 기판에 가해준 negative DC bias 전압은 0~-500V이었다. DC magnetron sputtering 방법에서는 반응가스로 아세틸린(C2H2) 가스를 사용하였으며, 플라즈마 발생을 용이하게 하기 위해서 Ar 가스와 혼합하여 사용하였다. Ar 가스의 유량은 10SCCM으로 고정하였으며, 아세틸렌 가스의 유량은 5~20SCCM 범위내에서 주입하였다. 이때, 기판에 가해준 negative DC bias 전압은 0~-100V이었다. 제작된 탄소막의 수소 함량을 조사하기 위하여 Fourier Transform Infrared (FTIR) 분광법과 Elastic Recoil Detection Analysis (EFDA) 법을 사용하였으며, 증착율은 SEM 단면촬영과 a-step을 이용하여 측정하였고, 막의 경도는 Micro-Hardness Testing 법을 사용하여 측정하였다.

• Journal of Korea Foundry Society
• /
• v.16 no.2
• /
• pp.158-164
• /
• 1996

In copper continuous casting, the soot, which is the incomplete pyrolitic product of acetylene, has been used as a mold coat. In this work, under constant acetylene pressure, the characteristics of soot and the optimum condition of sooting were investigated with different acetylene and oxygen flow rate. The soot particles deposited on the mold surface had mainly spherical shape and their sizes were about 20nm. After reaction with melt, their shapes were changed into polygonal type due to the graphitization. With increasing oxygen flow rate up to $0.6{\ell}/min$, the amount of residues of soot after heat treatment were kept nearly constant. But the amount of residues increased rapidly with further increasing oxygen flow rate. Degree of graphitization was maximum at $0.4{\ell}/min$ and $5{\ell}/min$ of oxygen and acetylene flow rate, respectively.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.240-244
• /
• 1998

Cavity ring-down spectroscopy (CRDS) is a high-sensitive laser spectroscopic technique capable of measuring concentrations of trace gases. We have demonstrated a new design of the CRDS spectrometer with a continuous wave (CW) laser. The ring-dwon signal is produced through blocking the incident CW laser by scanning the cavity length fast toward off-resonance iwth PZT (piezoelectric transducer). We have also measured an absorption spectrum of acetylene overtone transitions near 570 nm at the pressure of 2700 Pa, and the minimum detectable absorption coefficient has been found to be about $3{\times}10^{-9}\cm^{-1}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.565-565
• /
• 2012

그래핀(Graphene) 기반의 전계효과 트랜지스터(Field effect transistor) 응용에 있어, 가장 핵심적인 도전과제중 하나는 에너지 밴드갭(Energy bandgap)을 갖는 그래핀 채널의 제작이다. 그래핀은 에너지 밴드갭이 존재하지 않는 반금속(semi metal)의 특성을 지니고 있어, 그 본래의 물리적 특성을 지니고서는 소자구현에 어려움이 있다. 그러나 폭이 수~수십 나노미터인 그래핀 나노리본(Graphene nanoribbon)의 경우 양자구속효과(Quantum confinement effect)에 의하여 에너지 밴드갭이 형성되며, 갭의 크기는 리본의 폭에 반비례한다는 연구결과가 보고된 바 있다. 이러한 이유에서, 효과적이며 실현가능한 그래핀 나노리본의 제작은 필수적이다. 본 연구에서는 은 나노 와이어(Ag nanowire)를 기반으로 한 그래핀 나노리본의 합성을 연구하였다. 은 나노와이어를 열화학 기상증착법(Thermal chemical vapor deposition)을 이용, 아세틸렌(Acetylene, C2H2) 가스를 탄소공급원으로 하여 그래핀을 나노와이어 표면에 합성하였다. 합성과정에서 구조에 영향을 미치는 요인인 합성온도와 가스의 비율, 압력 등을 조절하여 최적화된 합성조건을 확립하였다. 합성된 나노리본의 특성을 라만분광법(Raman spectroscopy)과 주사전자 현미경(Scanning electron microscopy), 투과전자현미경(Transmission electron microscopy), 원자힘 현미경(Atomic force microscopy)를 통하여 분석하였다.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.778-784
• /
• 2002

Chemical modification of a dextran film to improve its physical properties was carried out by addition of plasticizers and crosslinking agents. Moreover, low-temperature plasma treatment with acetylene gas was done. The dextran film showed high mechanical strength but was brittle and vulnerable to moisture. When plasticizer was added, it became very soft but with large reduction of mechanical strength. However, a flexible film with fairly high mechanical strength and water resistance was prepared when the film was crosslinked by adding crosslinking agent with or after the addition of plasticizer. Treatment with an acetylene plasma changed the dextran film surface from hydrophilic to hydrophobic with little influence on the bulk properties of the film.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.3
• /
• pp.247-257
• /
• 2003

To investigate the effect of preparing condition on the physical properties of carbon nanotubes suitable for optical applications, carbon nanotubes were synthesized by thermal chemical vapor deposition using Ni particles as a catalyst on stainless steel substrate and acetylene as a reactant gas. To examine the physical and optical properties, SEM, TEM, Ram an, UV-visible, and photoluminescence spectroscopy were used. The physical properties of carbon nanotubes such as diameter, degree of growth density and morphology were closely related to such experimental conditions as Ni particle size, growing pressure, and etching condit on of Ni particles, it appeared from the light absorbance and photoluminescence spectra of carbon nanotube mixture prepared with an addition of a photopolymer, P3HT(Poly(3-hexylthIop hene)) that carbon nanotube could do a role as a kind of electron acceptor for solar cell application.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2692-2695
• /
• 2008

Polydiacetylene (PDA) is chemosensor materials that exhibit non-fluorescent-to-fluorescent transition as well as blue-to-red visible color change upon chemical or thermal stress. They have been studied in forms of film or microarray chip, so far. In this paper, we provide a novel technique to fabricate continuous micro-fiber PDA sensor using in-situ laser-polymerization technique and 3-D hydrodynamic focusing on a microfluidic chip. The flow of a monomer solution with diacetylene (DA) monomer is focused by a sheath flow on a 3-D microfluidic chip. The focused flow is exposed to 365 nm UV laser beam for in-situ polymerization which generates a continuous fiber containing DA monomers. Then, the fiber is exposed to 254 nm UV light to polymerize DA monomers to PDA. Preliminary results indicate that the fiber size can be controlled by the flow rates of the monomer solution and sheath flows and that a PDA sensor fiber successively responds to chemical and thermal stress.

• Korean Journal of Crystallography
• /
• v.8 no.1
• /
• pp.59-63
• /
• 1997

A method for the calculation of the idealized hydrogen positions in the following seven different kinds of compounds has been shown: (1) tertiary C-H, (2) secondary C-H, (3) $CH_3$ group with tetrahedral angles, (4) aromatic C-H or amide N-H, (5) O-H group with X-O-H angle tetrahedral, (6) terminal $X=CH_2$ or $X=NH_2^+$ with the hydrogen atoms in a plane and (7) acetylenic C-H with X-C-H linear.