• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.74-82
• /
• 2004

Planar laser-induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Acetone PLIF is chosen because fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone PLIF is applied to measure quantitative air excess ratio distribution in an engine fueled with LPG. Acetone is excited by KrF excimer laser (248nm) and its fluorescence image is acquired by ICCD camera with a cut-off filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile is suggested. Raw images are divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which is taken by a calibration process, are converted to air excess ratio distribution. This investigation shows instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• 한국연소학회지
• /
• 제15권4호
• /
• pp.43-52
• /
• 2010

A non-intrusive measurement, Planar Laser Induced Fluorescence was employed to visualize and measure the fuel distribution of the non-reacting field at the burner exit of gas turbine combustor. Measurement techniques, image processing method and quantification procedure were presented. Also, concentration measurement with gas analyzer was carried out to verify the propriety of PLIF result. The PLIF result coincides well with gas analyzer measurement result. PLIF test result for several other conditions are mentioned as well.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.353-356
• /
• 2002

Planar laser induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Preliminary investigation was performed to measure quantitative air excess ratio distribution in an engine fueled with LPG. It is known that fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone was excited by KrF excimer laser (248nm) and its fluorescence image was acquired by ICCD camera with a cut-of filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile was suggested. Raw images were divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which was taken by a calibration process, were converted to air excess ratio distribution. This investigation showed instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• 한국항공우주학회지
• /
• 제38권2호
• /
• pp.160-168
• /
• 2010

공명 주파수의 음파로 가진된 비예혼합 분류화염에서 가진 강도에 대한 영향을 실험적으로 조사하였다. 이를 위해 Mie 산란광 단면법, PLIF, PIV 등 광학적 가시화 방법이 사용되었다. 가진된 분류화염의 부상경로는 연료유량 및 가진 강도에 따라 크게 세 가지 영역으로 구분되는데, 비교적 큰 가진 강도에서 부상될 때 화염기저가 마치 난류화염처럼 부상되는 영역I과 작은 가진 강도에서 쉽게 부상되는 영역II 그리고 이 두 영역들 사이에서 부상된 화염기저가 부분 예혼합의 분젠화염과 같은 형태로 과도기적 영역이 존재함을 알았다. 본 연구에서는 영역I과 II로 구분되는 부상경로 차이에 대한 이해를 높이고자 가진 위상에 따른 노즐과 화염기저간의 유동 혼합과 속도 분포 특성을 아세톤 PLIF와 PIV 시스템을 사용하여 조사하였다.

• 한국추진공학회지
• /
• 제9권4호
• /
• pp.55-65
• /
• 2005

에어 터보 램제트 엔진 연소기에서 연료와 공기의 혼합성능은 연소 효율과 안정성에 중요한 요인이 된다. 에어 터보 램제트 축소모형의 연소기에서 혼합기에 따른 혼합성능을 파악하기 위하여 두개의 꽃잎형 혼합기를 제작하였고, 각각에 대하여 연료 분포를 측정하였다. 2차원 연료 분포 측정에는 평면 레이저 유도 형광 기법을 사용하였다. 획득한 아세톤 형광 이미지는 이미지 처리 기법을 사용하여 정량적 연료 분포로 나타내었다. 이러한 연료 분포 이미지를 바탕으로 연료와 공기의 혼합성능이 좋은 혼합기를 알아내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.529-532
• /
• 2002

In coflow jets with relatively large size nozzle and low fuel jet velocity, the buoyancy effect arises from the density difference between fuel and air streams. The present study investigated the behavior of such a buoyant cold Jet both numerically and experimentally, especially when the fuel stream has higher density than air. It has been demonstrated that the cold jet has a circular cone shape since upwardly injected fuel jet decelerates and forms a stagnation region, when the fuel jet was composed of propane highly diluted with nitrogen. When the fuel was moderately diluted, numerical results showed the Kelvin-Helmholtz type instability along the mixing layer of the jet. The stagnation height increases nonlihearly with fuel jet velocity with the power of approximately 1.64.