• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.182-185
• /
• 2014

In this paper, the ADC performs research and development for high speed data transfers to minimize the optical delay. Have more $6{\mu}s$ delay in the data signal converting optical repeater transmission system existing there has been a limit on the high-speed data transmission, and signal conversion. The need to develop a new technique to reduce the delay in time within $2{\mu}s$ data signal converted by using this direct conversion system. It is desired the development of the core technologies necessary for the signal transduction component, such as mobile communications LTE, LTE advanced service transport network is established, the delay time $3{\mu}s$ technology for reducing the delay time in the signal converting a revolutionary step is applied in this paper we have developed an ADC.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.422-426
• /
• 2005

초고속통신, 고 정밀 위치정보 시스템 등을 구현하기 위해 광 대역 특성을 요구하는 UWB(Ultra Wideband) 시스템에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 DS-CDMA(Direct Sequence - Code Division Multiple Access)를 근간으로 하는 3 GHz $\sim$ 5GHz의 주파수 대역을 갖는 UWB 시스템에서 아날로그 QPSK(Quadrature Phase Shift Keying) 변복조, 주파수 변환 및 전력 증폭 기능을 수행하는 RF 트랜시버 설계 방안을 제시하였고, 광 대역 특성을 만족하는 주요 구성 성분들의 설계 방법 및 성능 특성을 분석하였다. 상용 부품 및 제작된 부품 들을 이용하여 구현된 RF 트랜시버에 대한 성능평가를 통해 DS-CDMA 방식의 UWB 시스템을 위한 RF 트랜시버 설계 및 구현 접근 방법을 검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.656-659
• /
• 2017

In this paper, we propose a digital method for transmitting audio signals using LED visible light communication system. In the proposed method, we compare the method for transmitting audio signal in analog signal and the method for transmitting by digital signal. When amplifying the audio sound and transmitting the analog signal using the LED visible light communication, attenuation corresponding to the transmission distance occurs, and there is a disadvantage that it is noisy. In order to overcome this, we propose a method for transmitting digital audio signals. The proposed method has the advantage of reducing the influence of noise, but it turned out that it is affected much by the LED blinking speed. Various methods to overcome this need to be continuously studied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.240-245
• /
• 2015

This paper presents an impact of flicker for various binary modulations of visible light communication (VLC) under dimming requirement. While previous approaches consider the statistics of the signal that cannot capture contributions of dynamic impacts of flicker, the power spectral density is evaluated for various VLC transmission schemes of dimming support. This enables to compare transmission schemes with the contribution of low and intermediate frequency components to flicker. Numerical results show that analog dimming has advantages over other techniques in terms of flicker and signal processing with waveforms and symbol distribution allows to mitigate flicker effects.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.96-102
• /
• 2009

We investigate the characteristics of RJ (random jitter) in an analog fiber-optic link employing a MZM (Mach-Zehnder modulator) and an EDFA (Erbium-doped fiber amplifier). RJ has been measured using two methods, one of which derived from the noise spectrum of a RF spectrum analyzer and the other from the histogram data of a sampling oscilloscope. If the optical power and/or the RF power input to the MZM increase, RJ decreases due to the output signal power increase. For the optical link without EDFA, the minimum RJ is about 1 ps at an RF power of 10 dBm and an optical power of 8 dBm measured using the noise spectrum method. For the optical link with an EDFA, RJ decreases toward a jitter floor as the EDFA gain increases. If the gain increases further, it has been observed that RJ increases from the minimum. If the EDFA gain is fixed, RJ is smaller for the case of larger optical input power. As the EDFA gain increases, RJ reduction rate becomes greater for the case of lower optical input power.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.166-169
• /
• 2005

고속 데이터 전송을 함에 있어서 레이저 다이오드(LD)를 이용한 광접속 시스템은 최근 중요한 화두가 되고 있다. LD에 의하여 변조된 광신호는 광자와 캐리어의 동역학적 특성에 영향을 받으며, 이와 같은 LD의 동작 특성을 위해하기 위해서는 율방정식(Rate Equation)을 분석해야만 한다. 본 논문에서는 유한차분법(FDM)을 이용하여 율방정식을 분석하기 위한 모델을 제시하였으며, 이때 주입되는 전류부분에 디지털 혹은 아날로그 신호를 인가함으로써, 광접속 시스템에서 LD의 대역폭, SFDR (Spurious Free Dynamic Rage) 그리고 비선형 특성을 분석하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.36-42
• /
• 2007

In this paper, we have studied temperature compensation architecture for a bust mode optical transmitter to convert the electric burst mode date signal to a optical one through the laser diode. In order to get stable high speed data transmission, we used digital sampling technique with a microprocessor for the temperature compensation of the laser diode, not the previous real time analog technique. Though the digital automatic power control circuit should be complemented the previous analog one with accuracy and effectiveness. So the digital technique will be more effective in further future in development for the over Gb/s transmitting speed.

• Photonics industry news
• /
• s.38
• /
• pp.24-29
• /
• 2007

CCTV 산업은 보안산업의 일종이며 종래에는 CCTV 카메라에서 찍은 영상정보를 아날로그 방식으로 VCR에 저장하여 사용하였으나, 테이프 교체의 불편함과 반복사용에 따른 화질의 열화 등 많은 문제점을 안고 있어 최근에는 DVR로 대체되고 있는 추세이다. 현재 국내시장에서 아날로그 VCR 대 DVR의 비율은 70:30 정도로 추정되고 있으며, 통신기술의 발전으로 인한 네트워크망 확대 및 인터넷의 급속한 보급으로 인해 DVR의 보급이 급속히 높아지고 있는데, J.P Freeman 보고서에 따르면, 세계 DVR 시장규모는 2002년 7억 2천만 달러에서 2005년도 24억 달러로 확대되어 연평균 47%의 고성장 하고 있다고 발표하였다. 그리고, DVR의 VCR 대체율 역시 2002년 13%에서 2005년 45%에 이른 것으로 보고 있으며, 앞으로 설치하거나 교체하는 시스템은 VCR 대신 DVR을 선택할 것을 예측할 경우 2010년에는 전체 VCR의 90% 이상이 DVR로 교체될 것으로 전망되고 있다.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.475-477
• /
• 2005

We simulated 3rd order intermodulation distortion (IMD3) induced Carrier-to-Intermodulation Ratio (CIR) of laser diodes over a wide range of optical modulation index, and compared the results with commercial IMD3 induced CIR specification such as Composite Triple Beat (CTB) of DFB laser transmitter for CATV networks. It shows that the simulation results are in good agreement with the CATV CTB specification within 3dB margin. The results can be used to predict IMD3 induced CIR performance for various analog optical transmission systems with given optical modulation index and the number of transmission channels.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.915-919
• /
• 2014

Since smart phones are widely used globally, the demand for high-speed mobile communications are increasing. To accommodate the increased communication demand, the next-generation mobile communication services such as LTE-Advanced are deployed. In the LTE-Advanced base stations, the base station schemes of Digital Unit (DU) and Radio Unit (RU) are widely used. Here, the link between DU and RU is called fronthaul link. In the current fronthaul link, a digital optical communication interface is used, which is called Common Public Radio Interface (CPRI). However, the CPRI link cannot support the increased mobile traffic efficiently. Therefore, in this paper, we investigate an alternative technology based on the Radio over Fiber (RoF) to accommodate the increased mobile traffic economically.