• Journal of Ocean Engineering and Technology
• /
• v.16 no.1
• /
• pp.46-51
• /
• 2002

Fatigue life estimation by the theoretical stress concentration factors are, in general, considerably different from test results. And in calculating stress concentration factor, it is very difficult to consider actual geometry and material property which are the notch shapes, imperfections or defects of materials such as porosities inclusions and casting defects, etc. Therefore, the paper deals with the experimental method to find out the more exact stress concentration factors by measuring the strain distributions on each specimen by 3D-ESPI(Electronic Speckle Pattern Interferometry) System. Then the fatigue lives are compared between theoretical calculations using stress concentration factors determined by 3D-ESPI system and fatigue test results.

• 대한한약신문
• /
• s.120
• /
• pp.1-8
• /
• 2007

'제7회 산청한방약초 축제' 성황/한의학연구원, 기술이전 설명회 개최/'2007 대구약령시 한방문화축제'/한약재수급조절소위원회 개최/시중 유통 한약재 허용치 이상 중금속 검출/한약재품질인증센터 기공/올해 한방치료기술개발사업에 21억 투입/한약 포제규격화 전문가 회의 개최/한약재 '포' 제품 규격제정 추진/위해의약품 자진회수 의무화/복지부, 심천사혈요법연수원 고발조치/불법 한방식품 판매업자 검거/신생아 태반, 건강원 '중탕' 단속/KIOM, 지식정보자원 디지털화 사업 추진/양산시, 첨단의료복합단지 유치 '본격화'/한도협, "한약도매상 영세성 가속화" 주장/산청 한의학 박물관 개관/식.의약품 안전관리 연구 141억원 투입/흑삼농축액 발암물질 벤조피렌 검출/비증 이야기/명칭이 비슷하여 감별하기 어려운 한약재/지부탐방-지부장에게 듣는다/우리 약초를 찾아서-천마

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.689-692
• /
• 2011

본 논문에서는 해양작업 상태의 하중조건을 고려한 부유식 원유생산 저장 하역 장치에 설치된 라이져 보강구조의 강도설계에 관련하여 다양한 근사화 기법 기반 설계 최적화 및 그 성능을 비교하고자 한다. 설계 최적화 문제는 하중조건별 구조강도의 제한조건 하에서 중량을 최소화하여 설계변수인 구조 부재치수가 결정되도록 정식화 된다. 비교 연구를 위해 사용된 근사화 기법은 반응표면법 기반 순차적 근사최적화(RBSAO), 크리깅 기반 순차적 근사최적화(KBSAO), 그리고 개선된 이동최소자승법(MLSM) 기반 근사최적화 기법인 CF-MLSM와 Post-MLSM이다. 본 연구에 적용한 MLSM 기반 근사최적화 기법들은 제한조건의 가용성을 보장할 수 있도록 새롭게 개발되었다. 다양한 근사화 모델 기반 설계 최적화 기법에 의한 결과는 설계 해의 개선 및 수렴속도 등의 수치적 성능을 기준으로 실제 비근사 설계최적화 결과와 비교검토 하였다.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.112-114
• /
• 2005

Direct nonlinear finite element analysis was carried out using nonlinear kinematic hardening model which was calibrated based on the experimentally determined material properties to obtain notch stress-strain state under cyclic load. By comparing numerical results and experimental data, conclusion was made on how well analysis results match physical phenomenon. Also, suggestion was made on what material curve should be used in conjunction with traditional Neuber/Glinka's rule to take into account the effect of material heterogeneity in its application to welded joint.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.3
• /
• pp.45-53
• /
• 2003

Ships and ocean structures are subjected to random loads caused by irregular waves. The irregularity of amplitude from random loading affects on fatigue crack growth and fatigue life. However the effects of irregularity of loading on fatigue including random loading have not been explained exactly. Therefore in this paper crack growth tests on DENT specimens under constant-amplitude loading including a single tensile overload are conducted to investigate the effect of overload on crack growth rate. The size of plastic zone and crack growth rate before and after a single tensile overloading are measured using ESPI system. Crack growth retardation model that is characterized by crack growth length and the size of plastic zone was proposed and compared with test result. From the research, the validity of proposed model is examined on crack growth retardation, and consequently fatigue life.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.3
• /
• pp.129-138
• /
• 2014

After global economic crisis, China has become one of the two pillars in the global economies and the country contributing to the Korean economy. Nevertheless, the research on Chinese financial market, particularly capital market, is rare to date. This study examined the growth enterprise market that emergedat the Shenzhen stock exchange and made comparative analysis on before and after listing for the Chinese small and medium sized firms and venture firms. The listing requirements at the Chinese growth enterprise market for the technologically innovative venture firms and fast-growing small and medium sized firms with financing purpose were more alleviated than the main board of Shenzhen stock exchange. Moreover, the listing procedures are simplified as well. Accordingly, many Chinese enterprises tend to list and the competition for listing is also intense. In particular, with the 36 initially listed firms at growth enterprise market as the research target, the investigation for the business performance before and after listing reveals that the three indexes including return on common equity, debt ratio and operating profit growth rate dropped dramatically for most all the firms. That is, the profitability and growth for the venture firms and small and medium sized firms listed on the Chinese growth enterprise market decreased rapidly after going public, only the stability improved due to the great financing. Taking a step forward, this phenomenon may result from the exaggerated reporting for the business performance before listing with the purpose of going public by the venture firms and small and medium sized firms. Thus, Chinese Securities Regulatory Commission should strengthen the accounting evaluation standard and regulation for the listing firms before going public. In addition, strict sanctions should be imposed on the firms with fraudulent accounting to establish healthy capital market.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.92-100
• /
• 2011

The main goal of this paper is to provide the theoretical background for the fracture phenomena in marine structural steels. In this paper, various fracture criteria are theoretically investigated: shear failure criteria with constant failure strain and stress triaxiality-dependent failure strain (piecewise failure and Johnson-Cook criteria), forming limit curve failure criterion, micromechanical porosity failure criterion, and continuum damage mechanics failure criterion. It is obvious that stress triaxiality is a very important index to determine the failure phenomenon for ductile materials. Assuming a piecewise failure strain curve as a function of stress triaxiality, the numerical results coincide well with the test results for smooth and notched specimens, where low and high stress triaxialities are observed. Therefore, it is proved that a failure criterion with reliable material constants presents a plastic deformation process, as well as fracture initiation and evolution.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.151-154
• /
• 2002

In this paper, the effect of the crack growth length on the plastic zone size at the crack tip and the crack growth lives of the DENT specimen under constant amplitude cyclic loading were studied. The plastic zone size was calculated by nonlinear static method in commercial finite element analysis program, MSC/NASTRAN and the crack growth lives were also calculated by using compliance function considering geometric shape in MSC/FATIGUE. The calculated plastic zone size increased proportional to the crack length. And comparison of calculated plastic zone size and crack growth lives with the experimental results shows a good agreement.

• Journal of Korea Port Economic Association
• /
• v.22 no.4
• /
• pp.59-79
• /
• 2006

In this paper, we analyse the comparative competitiveness of the 10 major logistic hub cities in China. First, using the input distance function, we calculated the technical efficiencies and the opportunity costs of the transport infra structure investments. Then, based on not only these supply side factors but also demand side, the overall comparative competitiveness by cities are analyzed. Our main findings are as follows: early developed, larger cities such as Shanghai, Guangzhou, Shenzhen are technically efficient but their opportunity costs of the additional transport investments are higher than the other cities. We also found that overall competitiveness of these larger and leading logistic hub cities are dominant over the small and newly developed logistic cities.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.153-160
• /
• 2010

This paper deals with the topology optimized design of the riser support structures for floating production storage and offloading units (FPSOs) under global and local loading conditions. For a preliminary study and validation of the numerical approach, a simplified plate under static loading is first evaluated with the representative topology optimization methods, the Homogenization Design Method (HDM) and Density Method (DM) or Simple Isotropic Material with Penalization (SIMP). In the context of the corresponding riser support structures, the design problem is formulated such that structure shapes based on design domain variables are determined by minimizing the compliance subject to a mass target, considering the stress criterion. An initial design model is generated based on an actual FPSO riser support configuration. The topology optimization results present improved design performances under various loading conditions, while staying within the allowable limit of the offshore area.