• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.60-67
• /
• 1984

This study was identified 6 species of the genus Acer in Korea by the method of thin layer chromatography on lipids in heart wood, and researched affinity among the species for the characteristics of color reaction. The results were summarized as follows; 1) Total-lipid in heart wood of the six species was 4.39%, mean free-lipid was 2.85% and mean bound-lipid was 1.54%. 2) All the six species; A. ginnala, A. mono, A. negundo, A. palmatum, A. saccharinum and A, triflorum were identified by the characteristics of color reaction. Judging from the color reactions, A. palmatum and A. triflorum seem to be closer than other species.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.1-17
• /
• 2000

Crystals in the woods and barks of Populus maximowiczii and Populus nigra ${\times}$ maximowiczii were examined by light microscopy, scanning electron microscopy and soft X-ray. Populus examined had the wetwood and the heartwood of Populus showed higher moisture content than in adjacent sapwood. The crystals can be detected clearly by the soft X-ray due to their higher densities than the wood. Crystals in xylem wood of Populus were found mainly at heartwood. However, they were concentrated in specific areas such as in color-stained area or along the specific annual rings. Crystals showed the highest occurrence around the pith. Within a growth ring the amount of crystals in earlywood was more abundant than in latewood. Crystals were observed mainly at vessels and fibers although they occurred at all kinds of cells in heartwood. Crystals in the bark were scattered evenly both in inner bark and in outer bark. Populus nigra${\times}$maximowiczii showed higher frequency of leaf knots than Populus maximowiczii.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.78-84
• /
• 2000

Two flavanones and one flavone were isolated from the diethylether soluble fraction of ethanol extract of Larix leptolepis heartwood. These compounds were identified 3,3',4',5,7-pentahydroxyflavanone(taxifolin), 3,4',5,7-tetrahydroxyflavanone(aromadendrin) and 3,3',4',5,7-pentahydroxyflavone(quercetin) by instrumental analyses using UV, IR, MS and NMR spectrometries. Antioxidative activies of these compounds were investigated by 1,1-diphenyl-2-picrylhydrazyl(DPPH) free radical scavenging activity. Quercetin and taxifolin indicated high free radical scavenging activities compared to ${\alpha}$-tocopherol and BHT(butylated hydroxytoluene).

• Composites Research
• /
• v.26 no.2
• /
• pp.85-90
• /
• 2013

This paper presents the fabrication and 3-point flexion testing of carbon fiber reinforced polymer (CFRP) composite face/aluminum honeycomb core sandwich panels. Specimen sandwich panels were fabricated with three honeycomb types (3.18 mm, 4.76 mm, and 6.35 mm cell size) and three panel radii (flat, r = 1.6 m, r = 1.3 m). The curved sandwiches were fabricated normally with the core in the W-direction. The tensile mechanical properties of the CFRP $2{\times}2$ twill fabric face laminate were evaluated (modulus, strength, Poisson's ratio). The measured values are comparable to other CFRP fabric laminates. The flat sandwich 3-point flexion test core shear strength results were 11-30% lower than the manufacturer published data; the test set-up used may be the cause. With a limited sample size, the 1.3 meter panel curvature appeared to cause a 0.8-3.8% reduction in ultimate core shear strength compared to a flat panel.

• Journal of Korean Society of Forest Science
• /
• v.7 no.1
• /
• pp.45-49
• /
• 1968

This experiment was carried out to study moisture contents including in the woody parts of standing Pitch Pine trees. The moisture measuring samples were made from the parts of root, branch, top, sapwood and heartwood of test trees. The test trees and average moisture contents measured from the parts of trees are as table (1) and (2). According to the results this study may be concluded as followings. 1) In the winter felled Pitch Pine trees highest moisture contents are shown in the top wood but lowest in the heartwood among the parts of tree. 2) In comparing moisture contents showing between two parts of tree, significant differences are show between top or heartwood and other parts but between branch or sapwood and root are not shown. 3) As general there is no significant variation in moisture contents of root, sapwood and heartwood among the test trees but branch wood is shown considerable variation.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.32-40
• /
• 2003

Antimicrobial and antioxidative activities of heartwood extractives of domestic species were investigated to develop a natural fungicide or preservative. Four lignan derivatives and one taxane were isolated from heartwood of Taxus cuspidata which has been selected due to its high antioxidative activity among the tested species. The chemical structures were identified as : taxusin, isolariciresinol (4, 4', 9, 9'-tetrahydroxy-3', 5-dimethoxy-2, 7'-cyclolignan), lariciresinol (4, 4', 9-trihydroxy-3, 3'-dimethoxy-7, 9'-epoxylignan), taxiresinol (3, 4, 4', 9-tetrahydroxy-3'-methoxy-7, 9'-epoxylignan) and isotaxiresinol (3', 4, 4', 9, 9'-pentahydroxy- 5-methoxy-2, 7'-cyclolignan) on the basis of spectroscopic data and their chemical correlations. According to the results of free radical scavenging activity, isolariciresinol, lariciresinol and isotaxiresinol showed higher radical scavenging activity than those of 𝛼-tocopherol and butylated hydroxytoluene (BHT), the strongest natural and synthetic antioxidants. However, taxusin did not show any free radical scavenging activity. In this regard, it could inferred that high antioxidative activity of extractives of T. cuspidata was derived from isolariciresinol, lariciresinol and isotaxiresinol.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.549-558
• /
• 2014

Buckling restrained braces(BRBs) developed as a seismic protection element, hysteretic damper, have been investigated in America and Japan mainly. BRBs are composed of a steel core and concrete-filled steel casing. It is one of the major causes of drop in productivity to fill the steel casing with concrete. To improve this problem, the BRB is introduced in which the steel core is restrained with a pair of semicircular springs. In this paper, the numerical and analytical investigation about the desirable configuration for a semicircular spring is presented. Firstly, the stiffness and strength of semicircular spring is determined theoretically to buckle into a very high-order modes. Then, the required stiffness and strength are calculated under the practical design conditions and considered as reference values to find a proper configuration. The material strength and thickness of semicircular spring are chose from the finite element analysis for 5 semicircular springs with varying height. Finally, the nonlinear buckling analysis of BRB with proper semicircular springs shows that the bucking strength of the whole BRB is very similar to the strength of steel core with length between semicircular springs.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.12-19
• /
• 2017

Yellow-hearted pine (YHP; Pinus densiflora for. erecta Uyeki) is one of the Red pine species and has extremely narrow growth ring and high ratio of heartwood growing in Korea. It has been used for valuable wooden constructions as palace and temple for royal family since the Joseon Dynasty period. However, scientific information on the wood properties of YHP is still very lacking. This study was carried out to investigate natural durability of YHP to fungi and termites attack. Examination of anti-fungal and anti-termite properties of YHP was performed at indoor condition using brown-rot fungi (Fomitopsis palustris), white-rot fungi (Trametes versicolor), and termite (Reticulitermes speratus). The results showed that weight loss of the heartwood in YHP after fungi and termite test was much lower than those of the sapwood in YHP. Furthermore, the highest mortality of termite was obtained from the heartwood of YHP. Consequently, it is clearly revealed that the heartwood of YHP has excellent durability against brown- and white-rot fungi and termite.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1345-1352
• /
• 2012

This paper aims to evaluate the low-velocity impact responses and mechanical properties of balsa-wood and urethane-foam core materials and their sandwich panels, which are applied as the impact limiter of a nuclear spent fuel shipping cask. For the urethane-foam core, which is isotropic, tensile, compressive, and shear mechanical tests were conducted. For the balsa-wood core, which is orthotropic and shows different material properties in different orthogonal directions, nine mechanical properties were determined. The impact test specimens for the core material and their sandwich panel were subjected to low-velocity impact loads using an instrumented testing machine at impact energy levels of 1, 3, and 5 J. The experimental results showed that both the urethane-foam and the balsa-wood core except in the growth direction (z-direction) had a similar impact response for the energy absorbing capacity, contact force, and indentation. Furthermore, it was found that the urethane-foam core was suitable as an impact limiter material owing to its resistance to fire and low cost, and the balsa-wood core could also be strongly considered as an impact limiter material for a lightweight nuclear spent fuel shipping cask.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.72-78
• /
• 2008

The mass loss rate and heat release rate of EPS sandwich panel cores were analysed using variable external irradiation level. The experimental materials were exposed to incident heat fluxes form 20 to 50 kW/$m^2$. For the measurement of mass loss rate and heat release rate, the size of specimen was $100mm{\times}100mm{\times}50mm$ and the samples were 3 different kinds. The combustion heat were carried out from the Oxygen bomb calorimeter and the mass loss rate and heat release rate were carried out from the Mass loss calorimeter according to ISO 5660-1. As the results of this study, the mass loss rate of Type A, B, and C were 2.7 g/$m^2s$, 2.8 g/$m^2s$, and 2.3 g/$m^2s$ and the heat release rate of Type A, B, and C were 58.23 kW/$m^2$, 47.19 kW/$m^2$, and 50.06 kW/$m^2$ respectively at the heat flux of 50 kW/$m^2$. In conclusion, when the heat release characteristics applied to a classification system of Canada, Type A and C can be classified grade C-3, and Type C can be classified grade C-2 from all data of this study.