• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.18-24
• /
• 2011

A multi-channel seismic reflection (MCS) survey was conducted in 2009 to explore the deep crustal structure of the Pacific Plate south of Hokkaido. The survey line happened to traverse a 250-km-wide Warm Core Ring (WCR), a current eddy that had been generated by the Kuroshio Extension. We attempted to use these MCS data to delineate the WCR fine structure. The survey line consists of two profiles: one with a shot interval of 200m and the other with a shot interval of 50 m. Records from the denser shot point line show much higher background noise than the records from the sparser shot point line. We identified the origin of this noise as acoustic reverberations between the sea surface, seafloor and subsurface discontinuities, from previous shots. Results showed that a prestack migration technique could enhance the signal buried in this background noise efficiently, if the sound speed information acquired from concurrent temperature measurements is available. The WCR is acoustically an assemblage of concave reflectors dipping inward, with steeper slopes (${\sim}2^{\circ}$) on th ocean side and gentler slopes (${\sim}1^{\circ}$) on the coastal side. Within the WCR, we recognised a 30-km-wide lens-shaped structure with reflectors on the perimeter.

• Journal of the Korean earth science society
• /
• v.24 no.5
• /
• pp.440-448
• /
• 2003

We have performed 3-D geomagnetic induction Modeling considering with anomalous conductive structures to interpret the conductive anomaly proposed by previous studies on the Korean Peninsula. The results of modeling coincide well with the observed induction arrow. we confirm the fact that Imjin River Belt and Ogcheon Belt presumed in the model are reasonable. In the western-middle area of the peninsula (YIN, ICHN) the induction arrows seem to reflect the existence for the Imjin River Belt and the induction arrows in western-south area (HNS, CHY, DZN, MWN) is likely to reflect the effect of the Ogcheon Belt. The difference arrows, calculated by subtracting the sea effect from observed induction arrow in the western area of the peninsula at the period of 60-minutes, show little difference with the observed induction arrows. Especially, the difference arrows in YIN, ICHN also show a similar pattern to those at the periods longer than 10-minutes. These results strongly suggest that the Imjin River Belt and the Ogcheon Belt extend down to the deep part of the crust in spite of the limitation of our model.

• Journal of the Korean Geophysical Society
• /
• v.3 no.1
• /
• pp.67-74
• /
• 2000

Subsurface structure of the Bomun basin was studied along three survey tracks of Line-1, Line-2, and Line-3 using geomagnetic, radioactive, and seismic refraction methods. Abrupt changes found at 2.55 km west and 1.6 km east in the profile of magnetic anomaly along Line-1 are correlated with geologic boundary of the basin. Profiles of radioactive intensity also represent abrupt changes at 2.55 km west of Line-1 and at 1.9 km of Line-2. Cretaceous basement rock has relatively high magnetic anomaly of $200\;{\sim}\;500\;nT$ while sedimentary rocks of the Bomun basin have relatively low magnetic anomaly of $-100\;{\sim}\;+100\;nT$. Radioactive intensity also represents charateristic differences between Cretaceous basement and sedimentary rocks of the Bomun basin. Rocks of Cretaceous basement have lower radioactive intensity than the rocks of the Bomun basin. Magnetic anomaly of of the Bomun basin represents lowest anomaly in western part and increases gradullay toward east. This phenomenon is interpreted as a half graben structure dipping westward. Black shale known by previous studies near the western boundary has high magnetic anomalies and low radioactive intensity. This phenomenon provide a possibility of volcanic rock rather than black shale near the western boundary of the basin along Line-1. Sedimentary layers having velocities of 455 m/s, 1904 m/s, and 2662 m/s are developed to have westward dipping of $2.3^{\circ}$ in the central area of the Bomun basin. The result is consistent with a half-graben model dipping westward which were derieved from magnetic anomaly data.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.41-44
• /
• 2010

Purpose: Along with recent advances in PET/CT instrumentation and imaging technology, the number of patients has also been steadily increasing. This resulted in the increased radiation exposure to radiation workers in PET/CT rooms. In this study, we installed a radiation shield and investigated whether it could reduce radiation exposure to the workers and thus enhance job satisfaction. Materials and Methods: A radiation shield is composed of 5 cm thick lead and has a structure in which a radiation worker sits and watches a patient through lead glass while injecting radiopharmaceutical to the patient. Quarterly absorbed dose of radiation workers was measured using thermoluminescence dosimeters (TLD) and the results were compared for six months each before and after installation of the radiation shield. Exposure dose was also measured using a pocket dosimeter placed at the same location in the front and the back of the radiation shield. In addition, frequency of use of the shield and job satisfaction of radiation workers were investigated using a survey. Results: Quarterly absorbed dose of radiation workers was 2.70 mSv on average before installation of new radiation shield, whereas that dropped to 2.13 mSv after installation of radiation shield, reducing radiation exposure dose by 21%. Exposure dose on the front side of the shield was 61.2 R, whereas that on the back side of shield was 2.8 R. According to the survey, 85% of workers used the shield and were satisfied with the outcome: each radiation worker made injections to patients average of 6.5 times/day and preferred sitting to standing while injecting radiopharmaceutical to patients. Conclusion: Use of radiation shield reduced the exposure dose of radiation workers, which is the ultimate goal of radiation protection to minimize radiation exposure and is an appropriate method for the improvement of hospital working environment. Furthermore, we found that use of radiation shield not only relieves physical and psychological burden of radiation workers but also enhances job satisfaction. This result indicates that use of radiation shield is important for improvement of the radiation workers' job environment in terms of radiation protection.

• Economic and Environmental Geology
• /
• v.26 no.4
• /
• pp.433-444
• /
• 1993

Electrum (32~73 atom. % Ag)-sulfide mineralization of the Bodeok mine in the Boseong area was deposited in two stages of mineralogically simple, massive quartz veins that fill the fractures along fault shear zones in Precambrian gneiss. Radiometric dating indicates that mineralization is Late Jurassic age ($155.9{\pm}2.3$ Ma). Fluid inclusion data show that ore mineralization was formed from $H_2O-CO_2$ fluids with variable $CO_2$ contents ($X_{CO_2}=0.0$ to 0.7) and low salinities (0.0 to 7.4 wt. % eq. NaCl) at temperatures between $200^{\circ}$ and $370^{\circ}C$. Evidence of fluid unmixing ($CO_2$ effervescence) indicates pressures up to 1 kbar. Gold-silver deposition occurred later than base-metal sulfide deposition, at temperatures near $250^{\circ}C$ and was probably a result of cooling and decreasing sulfur activity caused by sulfide precipitation and/or $H_2S$ loss (through fluid unmixing). Calculated sulfur isotope compositions of ore fluids (${\delta}^{34}S_{{\Sigma}S}=1.7$ to 3.3‰) indicate an igneous source of sulfur in hydrothermal fluids. Measured and calculated O and H isotope compositions of ore fluids (${\delta}^{18}O_{water}=4.8$ to 7.2‰, ${\delta}D_{water}=-73$ to -76‰) indicate that mesothermal auriferous fluids at Bodeok were likely mixtures of $H_2O-rich$, isotopically evolved meteoric waters and magmatic $H_2O-CO_2$ fluids.

• Geophysics and Geophysical Exploration
• /
• v.6 no.2
• /
• pp.87-94
• /
• 2003

ULF geomagnetic field anomalies related to earthquakes have been reported and a mechnism that magnetic field variations could be generated by the induced telluric current due to the high frequency fluctuation of conductivity in a fault Bone have been proposed. In this study, we calculated electromagnetic anomalies using a simple fault model and investigated the possibility of significant perturbation. Since low frequency electromagnetic fields are modulated by the high frequency oscillation of conductivity and the modulated fields are concentrated in a narrow ULF band, the electromagnetic fields in ULF band could be perturbed significantly. The amplitude of electromagnetic field anomaly depends on various factors: the geometry and conductivity of fault zone, the magnitude and frequency of conductivity fluctuation, the resistivity structure of crust or mantle, the frequency bandwidth of observational data and so on. Therefore, it is strongly required to reveal the deep resistivity structure of crust a.: well ah the structure of fault zone and to ,select the optimal observation frequency band for the observation of electromagnetic activities related with earthquakes.

• Economic and Environmental Geology
• /
• v.40 no.1 s.182
• /
• pp.67-85
• /
• 2007

We have performed the CSAMT survey to examine the geoelectrical structure and groundwater distribution for two survey lines across the south-eastern region of Jeju Island. Three kinds of 1-D inversion techniques were employed taking account of the geological situation around the observation sites, and their inversion results were concurrently compared and analyzed to improve the reliability of interpretation. The resultant inverted resistivity structures reveals the three-layered structure, which is composed of the layers with a high-low-lower resistivity from the surface downward. Through the comparison of the inverted resistivity model and core log of deep borehole nearby observation sites, the lithology of each inverted layer was inferred. The first layer and second layer corresponded to the basaltic layer with a thickness of $100{\sim}250m$, and the third layer to the Seoguipo Formation and the U Formation; the thickness of the Seoguipo Formation could not be estimated due to the limitation of investigation depth and little resistivity difference between both Formations. Nevertheless, the Seoguipo Formation, which is strongly associated with the groundwater system in the south-eastern region of Jeju Island, showed the conspicuous spatial continuity from the middle mountain area to coastal area.

• Geophysics and Geophysical Exploration
• /
• v.23 no.1
• /
• pp.13-21
• /
• 2020

The acquisition and processing of long-offset data are essential for imaging deep geological structures in marine seismic surveys. It is challenging to derive an accurate subsurface image by employing conventional data processing to long-offset data owing to the normal moveout (NMO) stretch and non-hyperbolic moveout phenomena induced by seismic anisotropy. In 2017, the Korea Institute of Geoscience and Mineral Resources conducted a simultaneous two-dimensional multichannel streamer and ocean-bottom seismic survey using a 5.7-km streamer and an ocean-bottom seismometer to identify the deep geological structure of the Ulleung Basin. Herein, the actual geological subsurface structure was obtained via the sequential iterative updating of the velocity and anisotropic parameters of the long-offset data obtained using a multichannel streamer, and anisotropic prestack Kirchhoff migration was performed using the updated velocity and anisotropic parameters as input parameters. As a result, the reflection energy in the long-offset traces, which showed non-hyperbolic moveout owing to seismic anisotropy, was well aligned horizontally and NMO stretches were also reduced. Thus, a more precise and accurate migrated image was obtained, minimizing the distortion of reflectors and mispositioned reflection energy.

• Journal of Chest Surgery
• /
• v.36 no.11
• /
• pp.799-811
• /
• 2003

Background: The aim of this study is to define the cardioprotective effects (hemodynamic, cytochemical and ultrastructural of the newly developed Histidine-Tryptophan-Ketoglutarate (HTK) cardioplegia compared to DelNido cardioplegia. Material and Method: Seventy-nine isolated rat hearts were divided into three groups on the basis of techniques of cardioplegia infusion. Twenty-eight hearts (Group 1) were flushed with cold DelNido cardioplegia with every 40 minutes for 2 hours. Twenty-seven hearts (Group 2) were flushed with cold HTK cardioplegia for once during the 2 hours. Twenty-four hearts (Group 3) were flushed with cold HTK cardioplegia with every 40 minutes for 2 hours. Heart rate, left ventricular developed pressure (LVDP), changes of + dp/dt max, coronary flow, and rate-pressure product value were measured at pre-ischemic, post-reperfusion 15 minutes, 30 minutes, and 45 minutes for hemodynamic study. Aspartate aminotransferase (AST), lactate dehydrogenase (LD), creatine kinase (CK), CK-MB, troponin-I, myoglobin, and lactate were measured at pre-ischemic and post-reperfusion 45 minutes for cytochemical parameters. Mitochondrial scores were counted in 3 cases from each group for ultrastructural assessment. Result: In hemodynamic study, there were no significant differences among group 1, group 2, and group 3. However, the decrease values of heart rate in group 2 and 3 exhibited significantly lower values than in group 1. In cytochemical study, there were no significant differences among group 1, group 2, and group 3. However, the increase values of lactate in group 2 and 3 exhibited significantly lower values than in group 1. In ultrastructural assessment, the mean myocardial mitochondria scores in group 1, group 2, and group 3 were 2.14$\pm$0.10, 1.52$\pm$0.57, and 2.10$\pm$0.16. Conclusion: HTK solution provides adequate myocardial protection with some advantages over DelNido solution in isolated rat hearts.

• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.187-195
• /
• 2003

This case study which is to make 2-Dimension earth's crust structures clearly is about the great boring-hole blasting to provide ground vibration source of the reflected wave research on the Korean Peninsula earth's crust structures research. For this study we've done blasting twice-500 ㎏/charge per delay, 1,000 ㎏/charge per delay, and the specifications of blasting are the following - dia.: 300 ㎜, boring-depth : 100m, besides, we used the explosives and electric detonators which have sufficient detonating velocity and very excellent safety, capacity of detonating, accurate delay time. We charged explosives into steel pipe with bulk type to avoid dead pressure by ground water. And then we tested about pipe airtight and blasting to certificate which has no problem by using on this study. In the results, we succeeded each blasting in Seosan, Youngdong. For the Peak Sum Vector(PSV) around the blasting at the main points, its real measured PSV is higher 180 % than estimated PSV with USBM. In this study we can't to be analysis of vibration velocity, but to be key providing vibration source.