• Journal of Chest Surgery
• /
• v.36 no.12
• /
• pp.911-920
• /
• 2003

In this study, we analyzed the long-term surgical outcome of partial atrioventricular septal defects during the past 17 years at Seoul National University Hospital. Material and Method: A retrospective analysis on mortality, survival, and reoperation and their risk factors was done in 93 patients who underwent surgical correction of partial atrioventricular septal defects between April 1986 and December 2002. 32 patients were male and 61 were female with a median age of 68 months (3∼818 months) and a mean follow-up period of 108 months (1∼200 months). Result: There were 4 operative deaths (4.3%) and one mortality during the follow-up period. 3, 5, 10, and 15 year actuarial survival rates were 95.7%, 94.3%, 94,3%, and 94.3%, respectively. After the surgical correction, left atrioventricular valve Incompetence was improved in 61patients (67.7%), remained same as the preoperative status in 14 patients (15.1%), and was aggravated in 12 patients (12.9%). Reoperation was performed in 8 patients (9.0%) after a mean interval of 38.6 months (3∼136 months). Freedom from reoperation rates at 3, 5, 10, and 15 years after surgical correction were 94.0%, 91.4%, 91.4%, and 88,2%, respectively Reasons for reoperation were 7 left atrioventricular valve incompetence, 2 left ventricular outflow tract obstruction, a residual atrial septal defect, a left atrioventricular valve stenosis, and a right ventricular failure. Left ventricular outflow tract obstruction was the only statistically significant factor. In ten patients, significant arrhythmia was developed and three of them were supraventricular arrhythmia. Complete atrioventricular block occurred in 7 patients and permanent pacemakers were implanted in six of them. Conclusion: Surgical corrections of partial atrioventricular septal defects were performed with low operative mortality. Since left atrioventricular valve incompetence was the most common cause of reoperation and left ventricular outflow tract obstruction was the only risk factor for reoperation, a precise estimation of the left atrioventricular valve morphology and the structure of left ventricular outflow tract are needed. Although left ventricular outflow tract obstruction rarely developed, reoperation was frequently required and resection of subaortic tissue could be peformed but the possibility of recurrence was high, so modified Konno operation could be performed with satisfactory results. Complete atrioventricular block developed frequently in early periods, but was overcome with a precise anatomical understanding of conduction system and experience.

• Journal of Chest Surgery
• /
• v.40 no.10
• /
• pp.659-666
• /
• 2007

Background: Preserving the subvalvular apparatus after mitral valve replacement (MVR) results in better ventricular function and a better outcome. In conjunction, mitral valve repair (MVr) is associated with a better outcome, yet little is known about the hemodynamics and outcomes between patients undergoing MVr and MVR with chordal preservation. We prospectively evaluated the hemodynamic changes and outcomes of patients undergoing MVr and MVR with chordal preservation. Material and Method: Fifty-four patients with mitral regurgitation (MR) who under-went MVR with chordal preservation (n=21) or MVr (n=33) were studied. The patients' characteristics, the intra-and postoperative hemodynamics and the use of cardiac medications, the postoperative outcome and the complications were recorded during the hospital stay. All the patients were followed up for at least 6 months post-operatively for determining their morbidity and mortality. Result: The patients' characteristics were similar between the groups, except for the presence of atrial fibrillation and congestive heart failure which was more frequent in the MVR group. Also, the preoperative left ventricular ejection fraction was lower in the MVR group than in the MVr group ($64{\pm}9%$ versus $69{\pm}5%$, respectively, p=0.043). There were no significant differences of the hemodynamics between the groups. The use of inotropic drugs and pacemakers during the 12hrs postoperatively was more common in the MVR group than in the MVr group (48% versus 24%, p=0.025 and 52% versus 24%, p=0.035, respectively). The other postoperative outcomes were similar in both groups for at least the 6 months follow-up period. Conclusion: MVR with chordal preservation was comparable with regard to the hemodynamics and clinical outcomes, supporting the beneficial effect of preserving the subvalvular apparatus after MVR.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.421-430
• /
• 2014

In this study, a series of autoclave experiments were conducted in order to investigate the geochemical and mineralogical effects of carbon dioxide on deep subsurface environments. High pressure and temperature conditions of $50^{\circ}C$ and 100 bar, which are representative environments for geological $CO_2$ sequestration, were created in stainless-steel autoclaves for simulating the interactions in the $scCO_2$-groundwater-mineral reaction system. Zeolite, a widespread mineral in Pohang Basin where many researches have been focused as a candidate for geological $CO_2$ sequestration, and groundwater sampled from an 800 m depth aquifer were applied in the experiments. Geochemical and mineralogical alterations after 30 days of $scCO_2$-groundwater-zeolite sample reactions were quantitatively examined by XRD, XRF, and ICP-OES investigations. The results suggested that dissolution of zeolite sample was enhanced under the acidic condition induced by dissolution of $scCO_2$. As the cation concentrations released from zeolite sample increase, $H^+$ in groundwater was consumed and pH increases up to 10.35 after 10 days of reaction. While cation concentrations showed increasing trends in groundwater due to dissolution of the zeolite sample, Si concentrations decreased due to precipitation of amorphous silicate, and Ca concentrations decreased due to cation exchange and re-precipitation of calcite. Through the reaction experiments, it was observed that introduction of $CO_2$ could make alterations in dissolution characteristics of minerals, chemical compositions and properties of groundwater, and mineral compositions of aquifer materials. Results also showed that geochemical reactions such as cation exchange or dissolution/precipitation of minerals could play an important role to affect physical and chemical characteristics of geologic formations and groundwater.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.303-314
• /
• 1989

The electrum-silver-sulfide mineralization of the Geojae island area was deposited in three stages (I, II, and carbonate) of quartz and calcite veins that crosscut Late Cretaceous volcanic rocks and granodiorite(83 m.y.). Stages I and II were terminated by the onset of fractunng and breCCIation events. Fluid inclusion data suggest that the gold-sulfide-bearing stages I and II each evolved from an initial high temperature( near $370^{\circ}C$) to a later low temperature(near $200^{\circ}C$). Each of those stages represented a separate mineralizing system which cooled prior to the onset of the next stage. The relationship between homogenization temperature and salinity in stages I and II suggests a complex history of boiling, cooling and dilution. Evidence of boiling indicates a pressure of < 100 bars, corresponding to a depth of 500 to 1,250m assummg hthostatlc and hydrostatic pressure regimes, respectively. Fluid inclusion and mineralogical evidence suggest that the electrum-silver mineralization was deposited at a temperature of $220-260^{\circ}C$ from ore fluids with salinities between 1.9 and 8.1 equivalent wt.% NaCl. Total sulfur concentration is estimated to be $10^{-3}$ to $10^{-4}$ molal. The estimated $fs_2$ and $fo_2$ range from $10^{-11.8}$ to $10^{-14}$ atm and $10^{-35}$ to $10^{-36}$ atm, respectively. The chemical conditions indicate that the dominant sulfur species in the ore forming fluids was a reduced form($H_2S$). Rapid cooling and dilution of ore-forming fluids by mixing with less-evolved meteoric waters led to gold-silver deposition through the breakdown of the bisulfide complex($Au(HS)_2$) as the activity of $H_2S$ decreased.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.43-53
• /
• 2004

The current Korean Concrete Design Code(KCI Code) requires the minimum and maximum content of shear s in order to prevent brittle and noneconomic design. However, the required content of the steel reinforcement In KCI Code is quite different to those of the other design codes such as fib-code, Canadian Code, and Japanese Code. Furthermore, since the evaluation equations of the minimum and maximum shear reinforcement for the current KCI Code were based on the experimental results, the equations can not be used for the RC members beyond the experimental application limits. The concrete tensile strength, shear stress, crack inclination, strain perpendicular to the crack, and shear span ratio are strongly related to the lower and upper limits of shear reinforcement. In this research, an evaluation equation for the minimum content of shear reinforcement is theoretical proposed from the Wavier's three principals of the mechanics of materials.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.267-276
• /
• 1998

Any detector inserted into a phantom should have such a geometry that it caused as small as possible perturbation of the electron fluence. Plane parallel chambers meet this requirement better than other chambers of configurations. IAEA protocol recommends the use of plane parallel chambers for this reason. However, the cylindrical chambers are widely used for convenient. The purpose of this study is to evaluate the absorbed dose due to the differences of four different dosimetry protocols such as IAEA protocol using cylindrical chamber, TG 21 protocol using cylindrical chamber, Markus protocol using plane parallel chamber, and TG 39 report for the calibration of plane parallel chamber in electron beams. Depth-ionization measurements for the electron beams of nominal energy 6, 9, 12, 15, and 18 MeV from Siemens accelerator with a 10$\times$10 cm$^2$ field size were made using a radiation field analyser with 0.125 cc ion chamber. Dosimetric measurements by IAEA and TG 21 protocol were made with a farmer type ionization chamber in solid water for each electron energy, respectively. Dosimetric measurements by Markus protocol were made with a plane parallel ionization chamber in solid water for each electron energy, respectively. The cavity-gas calibration factor for the plane parallel chamber was obtained with the use of 18 MeV electron beam as guided by TG 39 report. Dosimetric measurements by TG 39 were performed with a plane parallel ionization chamber in solid water for each electron energy, respectively. For all the energies and protocols, measurements were made along the central axis of the distance of 100 cm (SSD = 100 cm) with 10$\times$10 cm$^2$ field size at the depth of d$_{max}$ for each electron beam, respectively. In the case of 18 MeV, the discrepancy of 0.9 % between IAEA and TG 21 was found and the two protocols were agreed within 0.7 % for other energies. In the case of 18 MeV and 6 MeV, the discrepancies of $\pm$ 0.8 % between Markus and TG 39 was found, respectively and the two protocols were agreed within 0.5 % for other energies. Since the discrepancy of 1.6 % between cylindrical and plane parallel chamber was found for 18 MeV, it is suggested to get the calibration factor using other method as guided. by TG 39.9.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.12
• /
• pp.1555-1562
• /
• 2000

Objects : Surgical management of the distal anterior cerebral artery(DACA) aneurysms presents several unique problems to surgeons, such as difficulty in early identification of parent arteries, high incidence of rebleeding and premature rupture, and requirement of unfamiliar approach other than conventional frontotemporal craniotomy. Therefore, preoperative anatomical knowledge of anterior interhemispheric fissure and entry point of dissection is prerequisite. Authors utilized a frontobasal approach for DACA aneurysms by using consistent external landmark for guidance to the deep structure. Materials and Methods : From Nov. 1995 to Jun. 1999, a surgical clipping of DACA aneurysms was carried out in 9 patients among a total 131 patients with intracranial aneurysms. In each case, the clinical and aneurysmal features were carefully reviewed through the angiograms, medical records, and intraoperative findings. Results : The incidence of DACA aneurysms was 6.9% from our series. All cases were arisen from juxtacallosal por-tion ; 6 cases from pericallosal-callosomarginal(PC-CM) junction and 3 from pericallosal-frontopolar(PC-FP) junction. Associated vascular anomalies were noted in 3 cases and multiple aneurysms in 3 cases, respectively. The preoperative clinical grades were generally poor. An early surgery was performed in 7 cases and frontobasal interhemispheric approaches in 7 cases. Postoperatively, two patients died of complications ; one delayed ischemic vasospasm and one aspiration pneumonia but remaining patients recovered well. Conclusion : The frontobasal interhemispheric approach was useful for DACA aneurysms in early surgery. Division of superior sagittal sinus(SSS) enabled a minimal retraction of brain on both sides, and prevention of intraoperative rupture was possible. Authors suggest the frontopolar(first frontal bridging) vein as a constant external landmark for approaching the genu of the corpus callosum and juxtacallosal DACA aneurysms.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.313-320
• /
• 2011

The Taebaegsan Mineralized District is the most prospective region for the useful mineral commodities such as a coal, non-metallic, metallic mineral in South Korea. From a general point of view, Cambro- Ordovician limestone formations, Myobong slate and Pungchon (Daegi) limestone, are the most fertilizable formations in the Taebaegsan Mineralized District. The geology around Weondong mine area consists mainly of Carboniferous-Triassic formations and Cambro-Ordovician formations intruded by rhyolite/quartz porphyry. The great overthrusted fault of N40~$50^{\circ}E$ direction, so called Weondong overthrust fault, is observed in the central part of the mine area and the NS fault system cuts the overthrusted fault. By postulating from the favorable geological and structural condition around Weondong area, the possibility of deep seated hidden ore bodies is expected. In 2010, on the basis of the results of LOTEM and CSAMT survey, the cross-hole survey was performed for the investigation of the hidden polymetallic ore body in the deep parts of the Weondong mine area and the grade of the newly-discovered orebody is as follows; (1) The cut-off grade for lead-zinc 3%; an weighted average grade 5.50% (2.7 m), (2) The cutoff grade for copper 0.1%; an weighted average grade 0.91% (14.65 m), (3) The cut-off grade for iron 30%; an weighted average grade 38.18% (3.3 m), (4) $WO_3$ for each cut-off grade(0.01%, 0.05%, 0.1%); an weighted average grade 0.29 wt. % (8.8 m), 1.15 wt. % (2.1 m), 1.97 wt. % (1.2 m), (5) $MoS_2$ for each cut-off grade(0.01%, 0.1%); an weighted average grade 0.15 wt. % (6.3S m), 0.28 wt. % (3.15 m), (6) $Ta_2O_5$ for each cut-off grade (0.01%, 0.1%); an weighted average grade 0.13% (19.S m), 1.11% (1.8 m), (7) $Nb_2O_5$ for each cut-offgrade (0.01%, 0.1%); an weighted average grade 0.06% 11.5 m), 0.15% (3.0 m).

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.171-182
• /
• 2018

We performed the seismic field data processing using an open-source software (Madagascar) to verify if it is applicable to processing of field data, which has low signal-to-noise ratio and high uncertainties in velocities. The Madagascar, based on Python, is usually supposed to be better in the development of processing technologies due to its capabilities of multidimensional data analysis and reproducibility. However, this open-source software has not been widely used so far for field data processing because of complicated interfaces and data structure system. To verify the effectiveness of the Madagascar software on field data, we applied it to a typical seismic data processing flow including data loading, geometry build-up, F-K filter, predictive deconvolution, velocity analysis, normal moveout correction, stack, and migration. The field data for the test were acquired in Gunsan Basin, Yellow Sea using a streamer consisting of 480 channels and 4 arrays of air-guns. The results at all processing step are compared with those processed with Landmark's ProMAX (SeisSpace R5000) which is a commercial processing software. Madagascar shows relatively high efficiencies in data IO and management as well as reproducibility. Additionally, it shows quick and exact calculations in some automated procedures such as stacking velocity analysis. There were no remarkable differences in the results after applying the signal enhancement flows of both software. For the deeper part of the substructure image, however, the commercial software shows better results than the open-source software. This is simply because the commercial software has various flows for de-multiple and provides interactive processing environments for delicate processing works compared to Madagascar. Considering that many researchers around the world are developing various data processing algorithms for Madagascar, we can expect that the open-source software such as Madagascar can be widely used for commercial-level processing with the strength of expandability, cost effectiveness and reproducibility.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.329-342
• /
• 2003

Most of the existing multicast routing protocols for ad-hoc networks do not take into account the efficiency of the protocol for the cases when there are large number of sources in the multicast group, resulting in either large overhead or poor data delivery ratio when the number of sources is large. In this paper, we propose a multicast routing protocol for ad-hoc networks, which particularly considers the scalability of the protocol in terms of the number of sources in the multicast groups. The proposed protocol designates a set of sources as the core sources. Each core source is a root of each tree that reaches all the destinations of the multicast group. The union of these trees constitutes the data delivery mesh, and each of the non-core sources finds the nearest core source in order to delegate its data delivery. For the efficient operation of the proposed protocol, it is important to have an appropriate number of core sources. Having too many of the core sources incurs excessive control and data packet overhead, whereas having too little of them results in a vulnerable and overloaded data delivery mesh. The data delivery mesh is optimally reconfigured through the periodic control message flooding from the core sources, whereas the connectivity of the mesh is maintained by a persistent local mesh recovery mechanism. The simulation results show that the proposed protocol achieves an efficient multicast communication with high data delivery ratio and low communication overhead compared with the other existing multicast routing protocols when there are multiple sources in the multicast group.