• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.58-65
• /
• 2015

For the rehabilitation of fully edentulous patients, implant-supported removable partial dentures can be considered as one of the treatment options with complete dentures or implant-supported overdentures. If removable partial dentures are used in combination with a small number of implants placed in strategically important positions, it can offer additional stability, retention and support through implants and reduce a burden of surgical procedures compared with fixed implant-supported prostheses with extensive implant placement. Moreover, the economical benefit can be expected as well. The purpose of this case report is to present a treatment in which an implant-supported removable partial denture was fabricated considering residual alveolar bone status and demands after teeth loss in a patient who had been using a distal extension removable partial denture for a long period of time. In anterior area, fixed prostheses were fabricated with implant placement and in posterior area, short implants provide only support for the removable partial denture. In addition, denture base and clasp were made of thermoplastic acrylic resin. Finally, functionally and aesthetically satisfying treatment results can be achieved.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.39-45
• /
• 2015

Loss of continuity of the mandible destroys the balance and symmetry of mandibular function, leading to altered mandibular movements and deviation of the residual fragment towards the resected side. Apart from deviation, other dysfunctions include difficulty in swallowing, speech, mandibular movements, mastication, and respiration are accompanied. In general, surgical reconstruction is considered first then proceeds to the prosthetic restorations. However, patients with systemic disease such as BRONJ (Bisphosphonate related osteonecrosis of the Jaw), surgical reconstruction may be limited. Thus, the prosthetic restoration remains as the only resort. Numerous prosthetic methods are employed to minimize deviation and to improve masticatory efficiency, function and esthetics. If a removable partial denture is the selected treatment modality, maximum stability of the partial denture base may be accomplished with a functional impression procedure by means of eliminating lateral and horizontal forces caused by the functional movements of the lips, cheeks and tongue. Also, Twin occlusion is used to obtain a favorable occlusal relationship and check support for esthetics. The purpose of this case report is to demonstrate how neutral zone impression technique and twin occlusion scheme were applied to restore a hemi-mandiblectomy patient with BRONJ syndrome to achieve satisfactory results in functional and esthetic aspects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.77-87
• /
• 2018

Prosthetic treatment using implants in fully edentulous patients includes implant-supported fixed prosthesis, implant hybrid prosthesis, implant retained- or supported-over-denture and implant supported fixed prosthesis has advantages such as psychological stability, pronunciation. If an implant supported fixed prosthesis is planned, the implants should be placed in consideration of pronunciation, esthetics, and oral hygiene. For this, clinical and radiological diagnosis is indispensable. When placing the prosthetic driven implant at the site determined from the diagnosis, a sufficient amount of alveolar bone and soft tissue support are required. If these requirements found to be insufficient, a wide range of bone grafting should be performed in advance. In this case, a fully edentulous patient with severe alveolar bone resorption due to periodontal disease was treated with a full mouth rehabilitation using implant-supported fixed prosthesis preceding maxillary sinus graft and alveolar bone augmentation. We report this patient were satisfied with esthetic and function.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.218-224
• /
• 2010

The prevalence of developmental defects of enamel and lesios by post-orthodontic decalcification has been reported with increasing frequency. Even though there have been increasing interests and clinical challenges in esthetic improvement of these lesions, few of studies were reported for using non-invasive approach which is a very significant matter for child and young adults. This study was conducted to assess clinical effect on the improvement in color of these lesions via resin infiltration method developed as minimum invasive technique for white spot. For the 38 maxillary anterior teeth with calcification problem, the changes in color between before- and after- infiltration treatment, were evaluated and summarized as following. 1. A week after infiltration, 25% of developmental defects and 61% of decalcification lesions were improved in color as the value of ${\Delta}E $ below 3.7. 2. 40% of the developmental defects and 6% of decalcification lesions showed no significant change. 3. The developmental defects showed more remarkable changes in color 1 week after infiltration rather than immediately after the treatment. From our study results, it is considered that the amount of color improvement depended on the depth of lesion. In other words, for the lesion having more depth than the depth infiltrant resin can penetrate into, infiltration treatment showed no significant effect. Therefore, for clinical indication of resin infiltration treatment, further research on precise measurement technique of lesion depth is strongly required.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.252-259
• /
• 2010

Trauma commonly leads to ankylosis for the tooth whose periodontal ligaments have been injured. In growing patients, an ankylosed tooth can disrupt alveolar development, resulting in infraocclusion of the affected tooth. Consequently, this causes aesthetic problems during adolescence, interferes with prosthetic treatment due to the inclination of adjacent teeth, and complicates orthodontic dental movement. When the infraoccluded ankylosed tooth is extracted, a considerable amount of alveolar bone is lost, especially in the maxillary anterior region. Moreover, depression of the thin buccal alveolar bone compromises aesthetic restoration. In order to prevent alveolar bone loss, the ankylosed tooth should be treated by decoronation. In the present study, the traumatically injured maxillary incisors of 9-year-old and 10-year-old patients that present infraocclusion accompanied by ankylosis were treated with decoronation procedures. Decoronation procedures were performed when the affected teeth were 2-3 mm below relatively to the adjacent teeth. Moreover, the patients were treated before they get to 16 years old considering the maximum growth peak of the korean adolescents. As the results, there are favorable clinical results associated not only with preservation of horizontal alveolar volume but also with increase in vertical alveolar height after decoronation in growing individuals.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.881-889
• /
• 1997

The purpose of this study was to compare four groups of Oriental young adults (169 males and 174 females) with normal occlusion and well balanced faced. Lateral cephalograms of 100 Koreans, 100 Chinese, 72 Vietnamese and 71 Japanese were digitized and six profile measures were computed. Analyses of variance showed that total facial profile(Gl'-Pr'-Pg') of Chinese was significantly less convex than the profile of Koreans or Vietnamese. Facial profile(Gl'-Pr'-Pg') of Chinese was also significantly less convex than that of Vietnamese. Holdaway's soft tissue angle(Pg'-LS:N-B) was significantly greater in Vietnamese than Chinese and Koreans, who were in turn greater than Japanese. The upper lip of Vietnamese is significantly closer to Ricketts' esthetic plane, than Chinese; Koreans and Japanese are significantly further behind the plane than Chinese. The lower lip of Koreans and Japanese was close to the esthetic plane, while Chinese and Vietnamese were approximately 2mm ahead. The nasolabial angle was significantly smaller for Chinese and Japanese than Koreans and Vietnamese. Sex differences were primarily dependent on the nose; total facial convexity and the nasolabial angle wert significantly larger in females than males. The results of this study demonstrate that a single standard of facial Profile is not sufficient or appropriate for Oriental patients.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.757-765
• /
• 2008

Maxillary central incisor impactions occur infrequently. Their origins include various local causes, such as odontoma, supernumerary teeth, space loss, and disturbances in the eruption path, also trauma and apical follicular cysts. Impacted teeth can cause serious dental and aesthetic difficulties as well as psychological problems especially in anterior regions. Although the impaction of maxillary incisor occurs less frequently than that of the maxillary canine, it is of concern to parents during the early mixed dentition stage because of the uneruption of the tooth. Forced eruption of impacted teeth should be considered in young patients because this technique can lead to suitable results from a periodontal, occlusal, and esthetic perspective at an earlier stage better than with other treatment options. This report presents the surgical and orthodontic treatment of cases with horizontally impacted and dilacerated maxillary central incisors. For each patient, we used the closed eruption method, placed an attachment on the impacted tooth on surgery, and fully closed the flap. Traction was applied immediately. The impacted tooth erupts through the healed tissue in a manner resembling normal eruption.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.234-243
• /
• 2015

Developing of digital technique, it is possible to fabricate implant prostheses for edentulous area using intraoral 3-dimentional information throughout implant diagnosis and treatment process. It is being changed that from the method using CAD/CAM, producing prostheses by model scanning after conventional impression and model processing, to the method of fabricating implant provisional restorations and customized abutments by digital impression after connecting digital impression copings (scanbody) and implant fixtures without models. But, this digital method has not been actively used for implant prostheses not yet. Specially, it is short of intraoral digital impression cases for immediate provisional restorations of the maxillary anterior implants. The gingival contour impression of maxillary anterior area is very important for esthetic restorations. Accordingly, in this case report, the using a digital impression coping (scanbody) and digital impression by CEREC Omnicam (Sirona, Bensheim, Germany) or Trios (3shape, Copenhagen, Denmark) were introduced for immediate provisional restorations in 3 cases needed a single implant restoration in maxillary anterior area. The clinical results were satisfactory on the convenience and accuracy of digital impression technique and the good esthetics of final restorations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.198-203
• /
• 2012

Excessive occlusal wear results in unacceptable damage to the occluding surfaces, and can cause pulpal injury, occlusal disharmony, impaired function, and aesthetic deformity. Patients with severely worn dentition need to be classified as several categories relative to the vertical dimension of occlusion (VDO) and the interocclusal distance for the prosthetic space. When treating patients classified as those who have excessive wear without loss of occlusal vertical dimension but with limited space, we could consider treating them at an increased vertical dimension of occlusion. Treatments at an increased vertical dimension of occlusion may provide stability, given that the amount of its increase was minimal, and a perfected occlusion was achieved after enough stabilization period. A 50-year-old male visited the department of Prosthodontics in Yonsei University Dental Hospital with the chief complaint of worn teeth on lower anterior area. Reconstruction at an increased vertical dimension of occlusion was planned. After the compatibility of the new vertical dimension of occlusion had been confirmed under interim fixed restorations, definitive fixed restorations composed of full-contour monolithic zirconia prostheses were placed. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition at an increased vertical dimension of occlusion with an improvement in esthetics and function.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.214-220
• /
• 2013

Implant prosthodontics is beneficial for edentulous patients in enhancing the support, retention, stability, phonation and so on. Various types of prosthesis supported by implant, including implant retained- or supported- overdenture for the removable type and ceramo-metal and fixed prostheses with processed acrylic teeth for the fixed type, are frequently used. Treatment planning for the prosthesis with implant must be made after considering individual characteristics such as form of residual ridge, soft tissue, interocclusal relationship, economic status. Fixed prosthesis with processed acrylic teeth (also known as 'implant hybrid prosthesis' or 'bone anchored bridge') has the advantages of both removable and fixed prosthesis such as proper soft tissue profile, esthetic outcome, increased masticatory efficiency and psychological stability. The 73-years-old female patient came to the department of prosthodontics, Dental hospital of Yonsei University. She was diagnosed with Kennedy class I partial edentulism in the maxilla and complete edentulism in the mandible. This article reports a satisfactory clinical and esthetic outcome of full mouth rehabilitation using removable partial denture in the maxilla and implant hybrid prosthesis in the mandible.