• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.267-274
• /
• 2021

The purpose of this study is to derive design factors to provide inclusive information without encouraging the division of region and ideology, and to present the prospects of election result infographics design through evaluation and interpretation of the based design factors. First, the methods and results of the study identify the characteristics of infographics design through theoretical considerations to confirm the importance of visualizing data, and the case study of infographics design as the main flow is cathogram-style design using various forms of digital interaction. Second, the 21 st National Assembly election of Korea resulted in the response to infographics design and evaluated and analyzed the suitability of design factors through surveys and expert interview for five designs selected (suitable for purpose, convenient, aesthetic, easy of understanding, and public concern). In conclusion, it is predicted that the election results infographics design will evolve to offset regional and ideological division by providing inclusive information tailored to consumer needs by providing different types of infographics designs that meet basic objectives and functions.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.554-563
• /
• 1999

For the purpose of elucidating the polymerization modes of dual-cure restorative materials and comparing them with single-cure restorative materials, a study was performed on the light-cured composite resin, dual-cure composite resin, dual-cure glass ionomer cement and chemical-cure glass ionomer cement. By measuring the microhardness of each material at 0mm, 1mm and 3mm depth during initial 24 hours with predetermined interval, the state of polymerization and degree of conversion was indirectly evaluated for each material, and obtained results are as follows : 1. All of four materials tested showed significant increase in microhardness after 24hrs compared with just after curing starts. 2. In all materials except Ketac-fil, there showed a significant difference in microhardness between each depth at each time interval. 3. In the test of lap time till final curing for each material, the polymerization process was revealed to last longer in the dual-cure type materials than in single-cure type materials at 3mm depth. Based on the results above, it was demonstrated with materials of dual-cure mode that the degree of conversion increases by successive curing reactions even in the deeper layers where sufficient curing light is impermeable.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.93-93
• /
• 2012

섬유산업은 그 제조 스트림이 높은 오염 부하와 에너지 다소비를 특징으로 하여 환경규제에 따라 기존 시장의 위축 가능성이 상존하고 있다. 특히 섬유산업의 주요 스트림 중의 하나인 염색가공 공정은 섬유에서 불순물을 제거하고 심미한 색상과 사용 목적에 적합한 성능을 부여하는 단계로 섬유제조 공정에서 가장 높은 부가가치를 부여하는 단계이나 고온의 물과 다양한 화공약품을 많이 사용하고 그 처리온도가 비교적 높아($100^{\circ}C$ 이상) 대표적인 폐수 발생 공정이자 에너지 다소비 공정이다. 섬유의 염색 방법 중 반연속방법인 CPB(Cold Pad Batch)염색은 반응성 염료와 알칼리의 혼합액으로 구성된 염액에 원단을 패딩한 후 상온에서 수 시간 배칭하고 수세 및 후처리하여 염색하는 방법으로 작업공정관리, 설비관리가 간편하고 에너지소비량 절감, 높은 생산성의 장점이 있다. CPB염색법은 주로 직물에 적용되어 보편화 되었으며, 작업공정 중 장력의 영향을 많이 받는 니트 소재에 적용되는 사례는 드물다. 직물류의 CPB 염색가공법은 대구 경북을 중심으로 연구진행이 활발히 이루어지고 있어 국내 100대 정도의 CPB 관련 장비가 직물제품에 한정되어 가동되고 있는 반면, 니트 CPB 관련 염색 가공 업체는 1곳에 불과한 실정이나 니트류에 대한 지속적인 수요 증가를 고려하면 니트 소재에 대한 CPB염색 적용은 시의적절한 필수요소라고 판단된다. 니트 소재에 대한 CPB염색가공 적용 시 나타나는 문제점은 작업원단의 변부 말림현상 발생, 전폭 상태에서의 색상차이인 listing현상, 원단의 첫도입부분과 끝부분의 색상차이인 tailing현상이며, 반복되는 작업 시 염색재현성을 확보하는 것으로 나타난다. 본 연구에서는 CPB염색 시 CPB Head 장치의 Padding 방식 즉, trough와 Nip type에 따른 염색 시 알칼리와 염료 투입에 따른 염색 재현성(Build up, Ending, 알칼리 안정성)을 비교해 보았으며, 이에 따른 염색제품의 물성 및 견뢰도를 확인하여 보다 효율적인 방식을 선별하였다.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.238-249
• /
• 2005

The contemporary two-jaw surgical approach usually involves a Le Fort osteotomy of the maxilla and a ramal osteotomy of the mandible with 3-dimensional repositioning of the jaws as well as the occlusal planes. After making the surgical treatment plan. the surgical movements are duplicated in the model surgery. During this procedure, reference poings and lines are drawn on the base of the models over the dental arch and sawcuts are mads according to these marked osteotomy lines. This technique, however, has been found to be inexact. especially when the laws are moved in several dimensions simultaneously. To overcome this. different methods have been developed for an accurate repositioning of the jaws as planned. A new appliance. Surgical Jaw Relater, has been devised by th8 author for the simple 3-dimensional relocation of the upper and lower models, resulting in the easy construction of the splints such as centric relation splint, intermediate and final splint. This article describes an introduction and a clinical application of this appliance. Through the application of this system to the orthognathic cases including two-law surgery. it is proved that the row device is very clinically useful.

• Korean Journal of Clinical Pharmacy
• /
• v.22 no.3
• /
• pp.195-201
• /
• 2012

목적: 이상지방혈증 환자의 치료는 우선적으로 저밀도지단백을 감소시키고, 저밀도지단백이 목표수치에 도달한 이후에도 혈중 중성지방이 높을 경우 nicotinic acid 또는 fibrate를 사용하도록 권장되고 있다. 본 연구는 이상지방혈증이 있는 환자에서 acipimox의 효과를 fenofibrate와 비교하여 분석하고자 시행되었다. 방법: 본 연구는 서울에 있는 한 3차 대학병원의 환자를 대상으로 후향적으로 의무기록을 분석하여 시행되었다. 혈중 중성지방 농도가 200 mg/dL 이상으로써 acipimox 또는 fenofibrate를 신규처방 받은 환자를 대상으로 각각의 약물이 지단백에 미치는 영향을 36주간 추적하여 비교분석 하였다. 결과: Acipimox를 투여 받은 환자 41명, fenofibrate를 투여 받은 환자 62명이 모집되었으며, 각각의 약물을 복용한 환자군의 기본적인 인구학적인 특성은 유의하게 상이하지 않았다. 3개월 간의 약물투여 후 두 약물군 환자 모두에서 총콜레스테롤(p < 0.05) 및 저밀도지단백(p < 0.001)이 약물투여 전과 비교하였을 때 유의하게 감소하였고, 고밀도지단백은 모든 환자에서 유의하게 증가하였다(p < 0.05). 한편 중성지방 감소율은 acipimox군이 fenofibrate군에서보다 더 크게 나타났다(p < 0.05). 약물유해반응의 빈도는 두 약물군 간에 유의한 차이가 없었다. 결론: 총콜레스테롤, 저밀도지단백 콜레스테롤 등을 감소시키거나 고밀도지단백 콜레스테롤을 증가시키는 효과는 acipimox와 fenofibrate가 유의하게 다르지 않았으며, 중성지방을 감소시키는 효과는 acipimox가 fenofibrate보다 우월하였다.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.328-339
• /
• 2019

Shopping information contents shown on online shopping sites represent online retailer's intention to draw potential consumers' visual attention. However, unfortunately, previous studies in literature show that most of the shopping information contents are naively designed just to appeal to consumers' visual attention without systematic and logical analysis of consumers' possible different visual reactions depending on gender. To fill in the research void like this, this study proposes eye-tracking approach to investigating the research issue of how gender affects consumers' visual attention towards human brand image contents on the online shopping sites. For the sake of conducting related eye-tracking experiments, we adopted two types of products - notebook computer as a utilitarian product, and perfume as a hedonic product. Results revealed that female consumers show higher visual attention to human brand image contents than male consumers. Besides, significant gender difference exists on the human brand image contents more highly when they are attached with a hedonic product like perfume, than a utilitarian product like notebook computer. From the eye-tracking-based experiment results like this, this study suggested theoretical backgrounds about gender differences towards online shopping information contents and related human brand image contents as well.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.764-771
• /
• 1994

Electrochemical synthesis of conductive polypyrrole films was carried out in nucleophilic solvent containing p-toluenesulfonic acid or bezensulfonic acid as supporting electrolyte and dopant. Also characteristics of degradation and improvement of mechanical properties were studied. The conductivity, tensile strength and elongation of the films obtained in dimethyformamide/p-toluenesulfonic acid had the highest value of 10-40S/cm, $25N/mm^2$ and 10%, respectively. The optimum condition of electrochemical synthesis was $2mA/cm^2$ for constant current method and 0.9V for constant potential method containing 0.5M pyrrole and 0.5M p-TSA. The obtained films showed good stability in air and electrode characteristics of secondary battery by reversibility in doping and undoping. The degradation process was 1st order reaction at various temeprature. The activation energy and rate constant of degradation reaction were $1.01JK^{-1}mol^{-1}$ and $3.1{\times}10^{-7}min^{-1}$ respectively at $25^{\circ}C$. For the improvement of mechanical properties, composition of polypyrrole films with various host polymer were investigated and increase of tensile strength and elongation was confirmed.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.616-623
• /
• 1994

Conductive Polypyrrole films have been synthesized by electrochemical method in nucleophilic solvent such as N, N-dimetylformamide(DMF), dimethylsulfoxide(DMSO). The effect of protic acid as supporting electrolyte to decrease the nucleophilicity of the solvent was studied. Cyclic voltammetry, I-t transients were carried out to investigate the electrodeposition of conductive polypyrrole film on platinum electrode. Three peaks of 0.65V, 0.85V, and 1.2V vs. $Ag/AgNO_3$ indicated oxidation of monomer, oxidation of pyrrole to the platinum electrode and decomposition of polypyrrole film, respectively. With the I-t transients, nucleation process was confirmed and from obtained linear fits of I vs.t2resembles the metal film formation, and 2.15-2.26 of n-value could be calculated. As concentration of pyrrole or prolic acid was increased, the conductivity of polypyrrole film increased linearly. Tensile strength and elongation were investigated for comparing the mechanical properties and also SEM was performed for morphology investigation.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.431-440
• /
• 1998

While periodontal disease results in the extrusion of upper incisors with interdental spacing in adult patient, the intrusive movement should be executed for the rehabilitation in terms of esthetics and function. The present study was peformed to investigate the periodontal response following orthodontic intrusion of teeth with infrabony pocket. Bone defect and periodontal disease were produced adjacent to the both maxillary second lateral incisors in four adult dogs. Four weeks later, a flap operation was performed to eliminate inflammation and a reference notch was made on the root surface at the level of bottom of each defect. Two weeks after periodontal surgery, 4 weeks of intrusion and subsequent another 4 weeks of retention was executed on the right side of incisors while left incisors served as the control. Through the histologic analysis, following results were obtained. 1. Histologic section of control side showed the reduction of pocket depth after flap operation. However, the status of long junctional epithelium was observed while new connective tissue attachment occurred in a small area adjacent newly formed cementum 2. Epithelial attachment was less around the intruded incisor while new connective tissue attachment was much more compared to the control side. 3. Plenty of cells were observed in the connective tissue around the reference notch of the intruded incisor and the degree of the new cementum formation was higher in the intruded incisor than the control. The results of the present study suggested that an orthodontic intrusion of periodontally involved and extruded incisors could be carried out with a desirable periodontal response, provided that inflammation is under control.

• The Journal of Korean Philosophical History
• /
• no.31
• /
• pp.87-111
• /
• 2011

In moral instruction, one of the important purposes is cultivate students' meaningful moral knowing. To obtain this purpose, generally systems approach has been adopted and used in moral instruction. Systems approach has emphasized efficient designs which do not occur incidental learning that does not contribute to obtain learning objectives. However, moral meaning may occur to the subject of knowing, then occurrence of coincidence can not be excluded. If we approach to moral instruction with operative and engineering ways, we may convey the learning object but it won't be received meaningfully. Because of such problem, moral instruction has been required an alternative perspective contrary to the systems approach. Above all we need to reconsider the logic of explanation based on the systems approach. Because the moral instruction is understood that it is a systematic and operative act according to the logic of explanation. According to the logic of explanation, education is an act that conveys the teachers' knowledge to students who have inferior knowledge to teachers'. During this process, students' interpretation has been overlooked. In moral instruction, the teachers' interpretation of moral meaning can occur and extend by students' interpretation. When we understand moral instruction as the course of alliance between interpretation, it could be stood out that teaching as a symbol, constitution of teaching text as a vacuum, learning as a coincidence. When we stand out these aspects, the moral instruction could be understand as a poetic act. And based on such understanding, we can abstract specific resemblances between the poetic act and the moral instruction. There are semantic invariants and semantic variants in the teaching text of moral instruction. The semantic variants premise uncertainty. The limitation, that is, semantic invariants and the openness which is possible within semantic variants are changed to the moral instruction by students' response. It is essential that a selective attention as esthetic transaction that could be changed from text to poet. Like this, we need to take notice of instructive aspects not to means for reaching learning objectives but to act for being possible disinterested experiential learning.