• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.39-45
• /
• 2000

This paper describes the fundamental investigations on the in-process monitoring techniques focused on Acoustic Emission(AE) based on analytical method. Experiments were conducted on a CNC lathe using conventional carbide insert tools under various cutting conditions. As the result of this study a suggestion is given about the multi-purpose use of AE-signals detected with a single sensor for the monitoring of tool wear, built-up edge and chatter vibration in turning process.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.259-261
• /
• 2005

기존 계통 안정도 평가와 제어의 방법은 전체 계통의 데이터를 취득한 후 평가하고 제어하는 방식으로 이루어져왔다. 하지만 이 방식은 계산 효율 측면과 통신상의 문제로 인해 신뢰성 측면에서 문제가 있다 더욱이 긴급한 상황에서 전압 불안정을 판단하기에는 많은 문제점이 발생한다. 이러한 문제를 해결하기 위하여 PMU(Phase Measurement Unit)와 같은 측정 장치에서 제공하는 지역정보를 이용한 VIP(테브난 임피던스와 부하 임피던스의 비교 분석하여 제어하는 방법)가 제시되었다. 본 논문에서는 VIP 알고리즘을 이용한 전압 불안정 현상 모의를 실시간 Digital Simulator (Hypersim)를 이용하여 계통을 분석하였다. Hypersim에서는 실제 계통과 유사한 모의를 통해 동적 모의가 가능케 하고 있다. 이것은 동안 실효치 데이터를 기반으로 하는 시간 모의에서 벗어나 실제 계통과 같이 순시치 데이터를 가지고 실제 상황처럼 모의 분석할 수 있는 것이다.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.45-50
• /
• 1997

I본 논문은 저압 수은-아르곤 기체방전을 이용한 콤팩트 형광램프에 대한 모델링으로서 방전관 내 기체의 반경방향 입자밀도 변화를 고려한 입자평형식, 에너지보존식 및 회로방정식 등의 모델 방정식을 구성하여 이를 상용전원 구동회로와 결합한 13[W] PL 콤팩트 형광램프에 적용하였다. 계산된 전류와 램프전압의 실효치 및 파형을 실험치와 비교하여 모델이 타당함을 보였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.59-64
• /
• 1997

This paper investigates the relationship between cutting conditions and Acoustic Emission(AE) signals; AEavg, AErms, AEmode, as the base working to monitor the tool wear with in-process. For this purpose, cutting tests were conducted on a CNC lathe with comprehensive cutting conditions.. It is known that AEavg and AErms are proportionaly increased as the increasing of cutting velocity and depth of cut respectively. It is also known that AEmode among three kinds of AE signals may be applied for in-process monitoring to make the self diagnosis system because of its stability to the variation of cutting condition.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.64-71
• /
• 1998

This paper investigates the relationship between cutting conditions and Acoustic Emission(AE) signals; $AE_{avg}$, $AE_{rms}$, $AE_{mode}$$AE_{avg}$ and $AE_{rms}$ are increased as the increasing of cutting velocity and depth of cut respectively. The new parameters, derived from $AE_{avg}$ and $AE_{rms}$, which may be used for the in-process detection of tool wear is discussed. It is also known that $AE_{mode}$

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.526-527
• /
• 2008

본 논문은 MOSFET을 스위칭 소자로 사용한 350W급 2MHz 병렬공진 DC-AC 컨버터를 제안한다. 제안된 DC-AC 컨버터는 스위치의 전압스트레스 크기가 입력전압과 동일한 값으로 주어져 기존의 절연형 컨버터들 중에서 가장 낮은 전압 스트레스 값을 가지고 입력전압의 크기와 출력전력의 크기를 고려하여 풀-브리지 컨버터 토폴로지를 채택하였다. MOSFET 게이트 구동펄스는 50% 시비율이며, 구동트랜스포머를 사용하여 DC-AC 컨버터의 플로팅 스위치를 구동하였다. DC-AC 컨버터의 입력 전압은 50V, 부하저항은 $500{\Omega}$의 무유도 저항을 이용했다. 출력전압과 출력전류의 실효치는 각각 430V, 800mA 이고 효율은 82.5%에 도달하였다.

• Fire Science and Engineering
• /
• v.34 no.4
• /
• pp.1-6
• /
• 2020

In this study, the authors measured voltage and current waveforms in real time during a serial arc discharge. The analysis results of the arc discharge radiation patterns exhibited intermittent discharge, arc growth, creation of a heat generating area, occurrence of plume, and formation of a red heat area, which proceeded in that order. When the serial arc discharge was introduced, the current and voltage waveforms exhibited periodicity as sine waves. It was also observed that a restriking transient voltage occurred when the waveform changed from positive (+) to negative (-) and vice versa. When the discharge proceeded, the amount of heat generated for 1 s and 600 s was approximately 0.317 mJ, and 190 mJ, respectively. The duration of the short circuit was approximately 1.66 ms, and in the case of the voltage waveform, it was evident that the electric potential increased to 49.9 V in the same cycle. Furthermore, when the discharge proceeded, the effective value (RMS value) of the current was approximately 1.72 A with a maximum current of approximately 2.53 A, whereas the effective value of the voltage was approximately 42.8 V with a maximum of approximately 208 V.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.5
• /
• pp.1-5
• /
• 1975

접합형 트린지스터와 발광다이오드(LED) 및 광도전소자(CdS)로서 구성된 광결합 전류안정부저항회로를 진안하였다. 이는 일반적으로 광트랜지스터보다도 더 예민한 것을 이용하여, CdS와 LED를 밀착 시켜서 LED에 흐르는 전류와 CdS의 실효저항변화로써 결합된 광결합방식을 택하였다. 트랜지스터의 콜랙터-에미터간에 인위적인 누변저항을 삽입하는 방법을 도입함으로써 부저항치 및 최대입력단자전압치를 임의로 변화할 수 있게 하였으며, 제안한 회로를 분석하고 또 이를 실험적으로 확인하였다. 누변저항을 1KΩ에서 30KΩ까지 변화시켰을 때 최대입력단자전압은 1.65V에서 4.22V로 변하였고, 부저항치는 -1.0KΩ에서 -10.0KΩ까지 변하였다. 또 실험치에 대한 계산치에의 상대백분최대오차가 11%이었다. A current stable negative resistance circuit has been constucted with combination of coulplementary symmetrical transistors, a light emitting diode and a photoconductive cell. The negative resistance(Rn) and break-over voltage(VBo) can be set at a designed value according to adjustment of the artificial leakage resistance of p-n-p transistor. The RN and VBo calculated in this designed circuit are checked though the experiments, the errors are found less than 11%.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.241-251
• /
• 1988

The purpose of this paper is to evaluate fracture strength of WA-vitrified and resinoid bond grinding wheels by means of acoustic emission. The paper conducts tension test, compression test, splitting tensile test and bending test with AE measuring system. These tests have been carried out in accordance with the grain sizes and grades of grinding wheels. The fracture strength of grinding wheels is evaluated by the clarification of biaxal fracture criterion of Babel and Sines. It clarifies the influence of factors of grinding wheel upon AE characteristics and evaluates the predictability of life of grinding wheels and the perception of fracture.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.11 no.1
• /
• pp.31-37
• /
• 1991

Acoustic emission(AE) signals detected during metal cutting were applied as the experimental test to sensing tool wear and chipping on the NC vertical milling machine. The in-process detection of cutting tool wear including chipping, cracking and fracture has been investigated by means of AE in spite of vibration or noise through intermittent metal cutting, then the following results were obtained 1) When the tool wear is increased suddenly, or the amplitude of AE signals changes largely, it indicates chipping or breaking of the insert tip. 2) It was confirmed that AE signal is highly sensitive to the cutting speed and tool wear. 3) At the early period of cutting, the wear were large and RMS value increased highly by the influence of minute chipping and cracking, etc. Therefore, the above situations should be considered for the time when the tool would be changed.