• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.526-527
• /
• 2008

본 논문은 MOSFET을 스위칭 소자로 사용한 350W급 2MHz 병렬공진 DC-AC 컨버터를 제안한다. 제안된 DC-AC 컨버터는 스위치의 전압스트레스 크기가 입력전압과 동일한 값으로 주어져 기존의 절연형 컨버터들 중에서 가장 낮은 전압 스트레스 값을 가지고 입력전압의 크기와 출력전력의 크기를 고려하여 풀-브리지 컨버터 토폴로지를 채택하였다. MOSFET 게이트 구동펄스는 50% 시비율이며, 구동트랜스포머를 사용하여 DC-AC 컨버터의 플로팅 스위치를 구동하였다. DC-AC 컨버터의 입력 전압은 50V, 부하저항은 $500{\Omega}$의 무유도 저항을 이용했다. 출력전압과 출력전류의 실효치는 각각 430V, 800mA 이고 효율은 82.5%에 도달하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1558-1570
• /
• 1994

The ideal stuffing jitter in a chain of stuffing systems is analyzed. The great jitter is generated when stuffing system operates with a stuffing ratio close to a simple rational number. The rms amplitude and probability density function of the accumulated jitter on the output of the chain is calculated and experimentally analyzed with a help of a hardware stuffing simulator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.55-58
• /
• 2004

To analysis on the degradation of the satellite communication signal due to Asian dust that was appeared on Korean peninsula during March and April 2004, EIRPs of L, S, C, Ku and Ka frequency band of the downlink of satellite communication link were measured by Satellite Signal Monitoring Center located in lcheon, Korea. The measured results were compared to the measurement values of PM10 and OPC that were measured by the Korea Meteorological Administration.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.291-292
• /
• 2019

본 논문에서는 AC 센서를 사용하는 전기자전거용 탭 인덕터 부스트 컨버터 시스템을 제안한다. 일반적으로 인덕터 전류 측정을 위해서는 DC 센서를 사용한다. 왜냐하면, AC 센서를 사용하여서 인덕터 평균 전류 크기를 측정하면 평균 전류 크기가 0이기 때문에 실효성이 있는 평균 전류 크기를 측정할 수 없다. 하지만 탭 인덕터 부스트 컨버터의 경우에는 부스트 컨버터 스위치가 닫혔을 때와 열렸을 때의 인덕터값이 달라져서 AC 센서로 측정되는 인덕터 전류 크기가 0이 아니고 AC 센서 측정값과 탭 인덕터의 턴 비를 이를 이용하여 간단한 계산을 통해 인덕터에 흐르는 평균 입력 전류 크기를 계산할 수 있다. 알 수 있다. 제안되는 시스템은 프로토타입 하드웨어로 설계되었으며 본문의 실험을 통해서 검증되었다.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.231-237
• /
• 2010

Computed tomography (CT) has been established as an important diagnostic tool in clinical medicine and has become a major source of medical exposure. A nationwide survey regarding CT examinations was carried out in 2007. Thanks to the appeasement policy regulating the import of CT scanners, there are 1,825 CT scanners across the country as of the end of March 2010, which means that we have 36.8 CT scanners per one million people. The annual number of examinations was 3.29 million, the number of examinations per 1000 population was 68. The most part of examinations was abdomen and pelvis. and the collective effective dose was in these parts. The effective dose per one population was evaluated as 0.952 mSv.

• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.70-76
• /
• 2005

For clinical implementation of Enhanced Dynamic Wedge (EDW), it is necessary to adequately analyze and commission its dosimetric properties in comparison to common physical metal wedge (MTW). This study was implemented with the essential measurements of parameters for clinical application, such as percentage depth dose, peripheral dose, surface dose, effective wedge factor, and wedge profile. In addition, through the comparison study of EDW with open and MTW, the analysis was performed to characterize the EDW. We also compared EDW dose profiles of measured values using chamber array 24 (CA24) with calculated values using radiation treatment planning system. PDDs of EDW showed good agreements between $0.2\~0.5\%$ of open beam, but $2\%$ differences with MTW. In the result of the measurements of peripheral dose, it was shown that MTW was about $1\%$ higher than open field and EDW. The surface doses of $60^{\circ}$ MTW showed 10% lower than the others. We found that effective wedge factor of EDW had linear relationships according to Y jaw sizes and was independent of X jaw sizes and was independent of X jaw sizes and asymmetric Y jaw opening. In comparison with measured values and calculate values from Golden-STT based radiation treatment planning system (RTP system), it showed very good agreement within difference of $1\%$. It could be concluded that EDW is a very reliable and useful tool as a beam modification substitute for conventional MTW.

• Journal of the Korean Chemical Society
• /
• v.42 no.4
• /
• pp.432-442
• /
• 1998

Since the definition of pH, $pH=-Ioga_H$ is based on a single ion activity, pH values can not be determined with measurement itself, but require an approximation method. They are derived from EMF measurement of a liquid junction free cell using hydrogen and Ag/AgCl electrodes. Primary standard materials with certified pH values can be obtained with this approximation method. Standard buffer solutions are used to calibrate pH meters. Thus the accuracy of the pH values of standard buffer solutions limits the reliability of measured pH values can be obtained with this approximation method. Standard buffer solution are used to calibrate pH meters. Thus the accuracy of the pH values of standard buffer solutions limits the reliability of measured pH values of sample solutions. To certify the pH values, we have established the system for the primary standard measurement and certified the pH of buffer solutions in the range of 1.6∼12.5 pH unit within uncertainty of ${\pm}0.005$ pH unit.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.123-123
• /
• 2018

가뭄은 홍수와 달리 진행속도가 비교적 느리기 때문에 초기에 감지한다면 피해를 최소화 할 수 있다. 국내에서는 가뭄전망을 위해 물리적 기반의 기상-수문연계해석 시스템을 구축하여 월 내지 계절전망을 수행하고 있다. 물리적 기반의 가뭄전망은 수치예보모델의 불확실성을 가지고 있으므로 예보 정확도 개선의 측면에서는 통계적 모델을 같이 활용하는 것이 바람직하다. 최근 국외에서는 통계적 방법인 AI (Artificial Intelligence) 기술을 사용하여 가뭄을 전망하는 연구가 활발히 진행 중이나, 아직까지 국내에서는 관련연구가 미흡한 실정이다. 이에 본 연구에서는 ANFIS (Adaptive Neuro-Fuzzy Inference System) 기반의 댐 유입량 예측 모델을 구축하고 SRI (Standardized Runoff Index)를 활용하여 수문학적 가뭄전망을 수행하였다. 대상유역은 국내 주요 다목적댐이 위치한 충주댐 유역과 소양강댐 유역을 선정하였다. 수문 및 기상자료는 국토 교통부 및 기상청의 관측 댐 유입량, 관측 강수량, 관측 기온 및 장기기상예보 자료를 사용하였다. ANFIS 모델 구축을 위한 훈련 및 보정기간과 검정기간은 각각 1987~2010년과 2011~2016년을 선정하였다. 수문학적 가뭄전망은 지속기간 3개월의 1개월 전망 SRI3를 활용하였으며, SRI3는 관측유입량과 예측유입량을 결합하여 산정하였다. 댐 예측유입량 및 수문학적 가뭄전망의 정확도 평가를 위해 상관계수, 평균제곱근오차를 활용하였다. 댐 예측유입량 평가 결과 예측값과 관측값의 상관계수가 높게 나타났으며, 평균제곱근오차는 낮아 예측성이 뛰어났다. SRI3의 경우 관측값과 예측값의 가뭄발생시기가 유사하여 가뭄을 적절하게 반영하는 것으로 나타났다. 본 연구의 결과는 통계적 기반의 수문학적 가뭄전망기법을 개발하였다는 측면에서 의의가 있으며, 향후 물리적 기반의 가뭄전망정보와 결합한다면 보다 실효성이 향상될 것으로 기대된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2317-2323
• /
• 2010

When the muscle is contracted by continuous and same, the force takes fatigue and stiffness. The aim of this study was to know how the fatigue and muscle stiffness change during an isometric contraction. Surface Electro myography(EMG) signal monitoring system and ultrasonic transducer set up the same muscle stem, subjects contract his right femoris muscle by submaximal isometric contraction(50% of MVC) until exhaustion. Before and after the test, muscle stiffness was measured and EMG was measured during the contraction. As time goes by, muscle fatigue was increased. and the stiffness was shown strongly after the contraction. These results show if the muscle becomes more and more fatigued, the circulation of muscle is delayed although the contraction doesn't happen. So muscle stiffness is increased.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.4
• /
• pp.457-461
• /
• 2010

Even though face recognition researches have been developed for a long ago, there is no practical face recognition system in real life. It is caused by several real situations where non-facial components such as glasses, scarf, and hair occlude facial components while facial images in a face database are well designed. This occlusion decreases recognition performance. Previous approaches in recent years have tried to solve non-facial components but have not resulted in enough performance. In this paper, we propose a method to handle this problem based on support vector data description, which trains the hyperball in feature space to find the minimum distance estimating the approximated face. In order to evaluate its performance and validate the effectiveness of the proposed method, we make several experiments and the results show that the proposed method has a considerable effectiveness.