• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.86-93
• /
• 2023

As the hysteretic behavior of reinforced concrete members under cyclic loading progresses, the energy dissipation ability decreases due to a decrease in stiffness and strength and pinching effects. However, the guideline "Nonlinear Analysis Model for Performance-Based Seismic Design of Reinforced Concrete Building Structures, 2021" requires calculating a single energy dissipation factor for each member and all histeric step, so the decrease in energy dissipation capacity according to histeric step cannot be considered. It is judged that Therefore, in this study, the energy dissipation factor according to the histeric step was examined by comparing the existing experimental results and the nonlinear time history analysis results for a general beam under cyclic loading. The energy dissipation factor was calculated as the ratio of the energy dissipation amount of the actual specimen to the energy dissipation amount of the idealized elastoplastic behavior obtained as a result of nonlinear time history analysis. In the existing experiment results, the energy dissipation factor was derived by calculating one cycle for each histeric step, and the energy dissipation factor was derived based on the nonlinear modeling process in the guidelines. In the existing experimental study, the energy dissipation factor was calculated by setting each histeric step (Y-L-R), and the energy dissipation factor was found to be 0.36 in the Y-L step and 0.28 in the L-R step, and the energy dissipation factor in the guideline was found to be 0.31. This shows that the energy dissipation factor calculation formula in the guidelines does not indicate a decrease in the energy dissipation capacity of reinforced concrete members.

• Korean Journal of Veterinary Research
• /
• v.38 no.1
• /
• pp.43-52
• /
• 1998

서방형 돼지성장호르몬(sustained-release formulation of porcine somatotropin, PST-SR)을 1주 간격으로 6차례 피하 및 근육주사하고 혈액과 조직중의 돼지 성장호르몬(PST)과 insulin-like growth factor 1(IGF-1)의 농도를 측정하여 다음과 같은 결과를 얻었다. 대조군의 혈중 PST와 IGF-1의 농도는 각각 2.41과 95.2 ng/ml 이었다. 1. PST-SR을 투여한 후 PST의 혈중농도는 8시간만에 최대에 도달하여(30 ng/ml) 곧 감소하였다. 혈중농도 반감기(decay half life)는 91~227시간이었다. IGF-1의 혈중농도는 투여후 12시간에 최대에 도달하였으며(165 ng/ml), 이후 서서히 감소되었고 반감기는 77~99시간이었다. 2. 혈중 PST농도-시간의 자료는 제재에서 PST가 유리되는 과정에는 두단계 즉, 투여후 24시간까지의 유리속도가 빠른 단계와 그 이후의 유리속도가 느린 단계가 있음을 보여주었다. 3. 여섯번의 반복투여기간에는 PST의 혈중농도는 투여직후 증가하여 24시간 이후 다음 투여전까지 지속적으로 감소되는 패턴이 반복되었고, 최종투여후 1주일경에는 정상수준으로 회복되었다. 반면에 투여가 반복됨에 따라 매 투여직후의 PST의 혈중 최고치는 다소 증가되는 경향을 보였다(20~40 ng/ml). IGF-1의 혈중농도는 투여가 반복됨에 따라 누적적인 증가현상이 뚜렷하였으며, 이후 2주일후 까지도 정상농도보다 높게 유지되었다(200ng/ml). 임상용량 투여군에서 PST 및 IGF-1의 혈중농도는 투여경로에 따른 차이는 나타나지 않았다. 4. 최종(6번째) 투여후 6, 8, 10, 14일에 조사한 간장, 신장, 소장, 근육, 지방 및 주사부위의 조직중의 PST 농도는 6일째에 이미 대조군 수준으로 회복되었다. IGF-1의 경우 최종투여후 6일에는 간장, 신장, 소장, 지방조직에서 정상보다 높은 농도로 잔류하나 이후 14일까지 모두 대조군 수준으로 감소되었다. 5. 이상의 결과는 본 실험에서 사용된 서방형 PST제제는 최소 1주간 유효성이 유지되며, 동시에 PST는 투여 6일째에, IGF-1은 투여후 14일에 정상수준으로 회복됨을 보여주고 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.103-110
• /
• 2006

Turbo code, a kind of error correction coding technique, has been used in the field of digital mobile communication system. As the number of iterations increases, it can achieves remarkable BER performance over AWGN channel environment. However, if the number of iterations Is increases in the several channel environments, any further iteration results in very little improvement, and requires much delay and computation in proportion to the number of iterations. To solve this problems, it is necessary to device an efficient criterion to stop the iteration process and prevent unnecessary delay and computation. In this paper, it proposes an efficient and simple criterion for stopping the iteration process in turbo decoding. By using variance values of noise derived from mean values of LLR in turbo decoder, the proposed algorithm can largely reduce the computation and average number of iterations without BER performance degradation. As a result of simulations, the computation of the proposed algorithm is reduced by about $66{\sim}80%$ compared to conventional algorithm. The average number of iterations is reduced by about $13.99%{\sim}15.74%$ compared to CE algorithm and about $17.88%{\sim}18.59%$ compared to SCR algorithm.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.2
• /
• pp.287-296
• /
• 2011

Thirty six female students participated in the experiment of the fat mass weight loss. they kept diary for foods they ate every day, took a picture of the foods, transmitted the picture to the experimenter by the camera phone, and consulted him about fat mass loss once a week for 8 weeks period. Fat mass weight and its related factors of the students had been measured repeatedly every week during 8 weeks, The repeated measurement data were used for applying various random coefficient models. And hence optimal random coefficient model was selected. From the optimal model, the baseline, body mass index, diastolic blood pressure, total cholesterol and time of the fixed factors were very significant. The fixed quadratic time effect existed. The variance components corresponding to the subject effect, linear time effect of the random coefficients were all positive. Thus random coefficients up to the linear terms were considered as the optimal model. The treatment effect reduced the weight loss to an average of 2.1kg at the end of the period.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.564-569
• /
• 2007

자동화 컨테이너 터미널에서 안벽크레인, AGV(Automated Guided Vehicle)와 같은 하역장비의 작업은 수 많은 요인에 영향을 받으며, 이로 인해 각 장비의 작업시간을 정확하게 추정하는 것은 거의 불가능하다. 작업시간의 불확실성은 AGV 배차를 어렵게 만들고 작업효율을 떨어뜨리는 주요 원인이다. 본 논문에서는 이러한 불확실성에 대처하기 위하여 확률적 시뮬레이션 기반 AGV 배차 알고리즘을 제안한다. 제안 방안은 AGV를 배차할 때, 이후 일정 기간 동안의 AGV작업에 대해 확률적 시뮬레이션을 여러번 반복하여 수행하고 평가 값을 평균함으로써 불확실성의 영향을 줄인다. 확률적 시뮬레이션을 위해 크레인 작업시간의 불확실성을 간단한 확률함수로 모델링하고 그에 따라 크레인 작업시간을 결정한다. 또한 AGV 작업시간을 가감속, 간섭을 고려하여 추정한다. 시뮬레이션 실험을 통해 제안방안을 검증한 결과 안벽크레인의 지연이 감소함을 확인하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.280-280
• /
• 2019

복잡한 구조의 인공어초는 그 형상에 따라 다양한 유동의 특성을 나타낸다. 이러한 유동장 분석은 여러 방면에서 다양한 실험적 연구가 수행되었으나, 현실적으로 좁은 측정영역 내에서 접촉식 계측장비의 설치가 불가하고 갇혀진 수로 내에서 발생하는 반사파랑의 영향으로 인하여 사실상 정량적인 결과도출이 어려운게 현실이다. 본 연구에서는 2차원 단면실험수로 내에 별도의 소파장치를 고안하여 단위 시간당 발생하는 반사율을 측정하고 그에 따른 인공어초 인근의 유동장의 양상을 검토하였다. 수리모형실험은 1/50의 실험축척을 적용하였으며, 서해의 조석 1주기를 재현함과 동시에 반사파랑을 최소화하기 위하여 동일한 스펙트럼(브렛슈나이더-Mytuyatu spectrum) 조건에서의 입사파랑을 15번 반복적으로 조파하였다. 실험 시 측정된 반사율은 0.05에 해당하며, PIV(Particle Image Velocimerty)시스템을 활용하여 인공어초 내부의 미세유동장을 측정하였다.

• Explosives and Blasting
• /
• v.21 no.4
• /
• pp.37-42
• /
• 2003

The source of rock breakage by explosive blasting is the energy released from an explosive. It is transmitted to the surrounding rock mass causing various types of fracture of rock material. The reaction of explosives and the resulting action on the surrounding rock mass are completed in very short tine, making it almost impossible to observe the processes occurring in the interior of the rock mass. In this study several input parameters are investigated by numerical modelling of blast source and dynamic response of rock mass. It is shown that damping coefficient and rising time are major parameters affecting dynamics response of rock mass.

• Clean Technology
• /
• v.16 no.4
• /
• pp.272-276
• /
• 2010

Adsorption process for the removal of acetylene, especially 2-butyne, from isoprene was studied with zeolite as an adsorbent. In this work, zeolite 5A was selected to investigate the effects of various regeneration conditions by repeated adsorption experiments. The effect of regeneration temperature and desorption pressure was investigated to identity the optimum regeneration conditions. Repeated adsorption and desorption experiments were carried out for 10 cycles to confirm the efficiency of regeneration process under temperature of 423 K and desorption time of 16 h.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.2
• /
• pp.39-47
• /
• 2018

This study was carried out to investigate the applicability of alternating temperature control during night time in a nursery seedling production. Three groups of samples were exposed to three different environmental conditions for 6 days from 18:00 to 09:00; one was constantly 15 ℃, another was alternating between 15 ℃ for 2 hours and 11 ℃ for 2 hours, and the other was alternating between 15 ℃ for 2 hours and 11 ℃ for 4 hours. Leaf temperature and stem temperature was measured in real time. The influence of cold stress was analyzed by flavonoid content and growth of tomato seedling. The temperature of leaves and stem became equal to the ambient temperature over time, furthermore, there was no significant difference among the treatments. In conclusion, it is considered that heating costs can be saved considerably, as the alternating temperature has fewer effects on cold stress reaction by tomato seedling growth.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.209-218
• /
• 2012

Repeatability and reproducibility in solid weight and effective porosity measurements have been discussed using 8 core samples with different diameters, lengths, rock types, and effective porosities. Further, the effect of temperature on the effective porosity measurement has been discussed as well. Effective porosity of each sample has been measured 7 times with vacuum saturation method with vacuum pressure of 1 torr and vacuum time of 80 minutes. Firstly, effective porosity of each sample is measured one by one, so that it can provide a reference value. Then for reproducibility check, effective porosity measurements with vacuum saturation of 2, 4, and 8 samples simultaneously have been performed. And finally, repeated measurements for 3 times for each sample are made for repeatability check. Average deviation from the reference set in solid weight showed 0.00 $g/cm^3$, which means perfect repeatability and reproducibility. For effective porosity, average deviations are less than 0.07% and 0.05% in repeatability and reproducibility test sets, respectively, which are in good agreement too. Most of porosities measured in reproducibility test lies within the deviation range in repeatability test sets. Thus, simultaneous vacuum saturation of several samples has little impact on the effective porosity measurement when high vacuum pressure of 1 torr is used. Air temperature can cause errors on submerged weight read and even effective porosity, because it is closely related to the temperature, density, and buoyancy of water. Consequently, for accurate measurement of effective porosity in a laboratory, efforts for maintaining air or water temperature constant during the experiment, or a temperature correction from other information are needed.