• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2398-2405
• /
• 2007

This paper proposes a contrast enhancement technique which stretches the intensity surfaces of image to improve the quality of the digital photos. The proposed method enhances the contrast of image by stretching the intensity surface of the original image to the maximum range of the output image in proportion to the distances between the original intensity surface and upper, lower intensity surface, respectively. The upper and lower intensity surfaces are generated from the original intensity surface by gaussian smoothing. In the experiments, digital color images in a variety of illumination conditions were used and the proposed method was compared with other several existed image enhancement algorithms, which are histogram stretching, surface stretching, histogram equalization, gamma correction and retinex. It was proved that the experimental results were more natural visually without deterioration of gradation.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.101-107
• /
• 2013

In this paper, we were to investigate effect of correction to muscle imbalance in lower limbs according to reduction of weight bearing methods of four point of horizontal shaft using two-belt treadmill. Participants were divided to two group according to each ten peoples who have difference of muscle function in left and right legs over 20%. Experiment progressed forty minutes a day three days a week, total four weeks and we estimated the maximal peak torque and average power for testing joint torque in hip, knee and ankle. The results showed that the correction effect of muscle imbalance to the maximal muscle strength was the most effective in hip joint. Also in knee joint, correction effect of muscular reaction was the most effective too. We thought that reduction of weight bearing methods could be positive effect to correct muscle imbalance in lower limbs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.194-195
• /
• 2012

박막 실리콘 태양전지에 입사한 빛 중 흡수층인 진성 비정질 실리콘층(i-a-Si)에 흡수된 빛은 출력으로 변환되나, 기타의 층에서 흡수된 빛은 손실 성분이 된다. 이 중 흡수 손실이 큰 층은 도핑 층(p-a-SiC 및 n-a-Si)들인데, 이 들의 흡수 손실을 측정된 광학함수를 이용해 계산해 보면 Fig. 1과 같이 나타난다. p-a-SiC은 광 입사부에 위치하여 단파장 영역의 흡수 손실을 일으키고, n-a-Si 은 태양전지의 후면에 위치하여 장파장 영역의 흡수손실을 일으킨다. 이러한 도핑층에서의 흡수 손실을 제거 또는 개선하기 위해 도핑층의 재료를 기존 재료보다 광학적 밴드갭이 큰 재료로 대체하여 개선하는 방안에 대해 논하고자 한다. 금속 산화물의 밴드갭은 실리콘 화합물에 비하여 대체로 큰 값을 가지기 때문에 이를 기존의 실리콘 화합물 대신으로 사용한다면 광학적 흡수 손실을 효과적으로 줄일 수 있다. 단, 이때 태양전지의 광 전압을 결정하는 인자가 p층과 n층 사이의 일함수 차이에 해당하므로, p층의 대체층으로 사용 가능한 금속 산화물은 일함수가 큰(＞5 eV) 재료 중에서 선택하는 것이 적합하며, n층의 대체층으로 사용 가능한 금속 산화물은 일함수가 작은(＜ 4.2 eV) 재료 중에서 선택하는 것이 적합하다. Table 1에서 p층과 n층 대체용 금속산화물의 후보들을 정리하였다. 먼저 도핑층에서의 광 흡수가 광손실이 될 수 밖에 없는 물리적 근거에 대해서 논하고, 그 실험적인 증명을 제시한다. 이러한 개념을 바탕으로 도핑층의 내부 전기장의 방향을 제어하여 전자-정공쌍을 분리 수집하는 방법을 실험적으로 구현하였다. 이어서 금속 산화물을 부분적으로 대체하여 흡수 손실을 개선하는 방안을 제시한다. WOx, NiOx, N doped ZnO 등을 적용하여 그 효과를 비교 검토하였다. 끝으로 금속산화믈 대체 또는 쇼트키 접합을 적용하여 도핑층의 광 흡수를 줄이고 효율을 향상하는 방안을 제시한다. 그 사례로서 WOx, MoOx, LiF/Al의 적용결과를 살펴보고 추가 개선방안에 대해 토의할 것이다. 결론적으로 광학적 밴드갭이 큰 재료를 도핑층 대신 사용하여 흡수 손실을 줄이는 것이 가능하다는 것을 알 수 있고, 이 때 일함수 조건이 만족이 되면 광 전압의 손실도 최소화할 수 있다는 점을 확인할 수 있었다. 현재까지 연구의 한계와 문제점을 정리하고, 추가 연구에 의한 개선 가능성 및 실용화 개발과의 연관관계 등을 제시할 것이다.

• Journal of Broadcast Engineering
• /
• v.12 no.1 s.34
• /
• pp.41-52
• /
• 2007

The 3DTV services can be seen as a general case of the multi-view video that has been receiving a significant attention lately. However, the key factors that influence the success of 3DTV are the availability of content, the ease of use, the quality of contents, and the reduction of cost. This paper deals primarily with the perceptual improvement in image quality, especially based on human factors. An optimal asymmetrical coding method for binocular and multi-view images is presented. The quantitative value of asymmetrical rate to maintain optimized subjective image quality is explored. Also we analyze how edges of 2D images affect on 3D perceptions and propose an edge-preserving algorithm to perform perceptual improvements. Experimental results demonstrate that the proposed algorithm enhances subjective image quality much better than conventional methods.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.4
• /
• pp.25-35
• /
• 2013

This paper focuses on building a generalized mood classification model with many mood classes instead of a personalized one with few mood classes. Two methods are adopted to improve the performance of mood classification. The one of them is feature reduction based on standard deviation of feature values, which is designed to solve the problem of lowered performance when all 391 features provided by MIR toolbox used to extract features of music. The experiments show that the feature reduction methods suggested in this paper have better performance than that of the conventional dimension reduction methods, R-Square and PCA. As performance improvement by feature reduction only is subject to limit, modular neural network is used as another method to improve the performance. The experiments show that the method also improves performance effectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.36-41
• /
• 2018

An image intensifying device is equipment that makes weak objects visible in a dark environment, such as making nighttime bright enough to let objects be visually observed. It is possible to obtain a clear image by amplifying the light in the presence of a certain amount of weak light. However, in an extremely low-light environment, where even moonlight is not present, there is not enough light to amplify anything, and the sharpness of the screen deteriorates. In this paper, a method is proposed to improve image quality by using multiple filters and anisotropic diffusion for output noise of the image-intensifying device in extreme low-light environments. For the experiment, the output of the image-intensifying device was obtained under extremely low-light conditions, and signal processing for improving the image quality was performed. The configuration of the filters for signal processing uses anisotropic diffusion after applying a median filter and a Wiener filter for effective removal of salt-and-pepper noise and Gaussian noise, which constitute the main noise appearing in the image. Experimental results show that the improvement visually enhanced image quality. Both peak signal-to-noise ratio (PSNR) and SSIM, which are quantitative indicators, show improved values.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.4
• /
• pp.66-76
• /
• 1990

In this work, the effect of noise and distortion of a telephone channel on the speech recognition is studied, and methods to improve the recognition rate are proposed. Computer simulation is done using the 100-word test data whichwere made by pronouncing ten times 100-phonetically balanced Korean isolated words in a speaker dependent mode. First, a spectral subtraction method is suggested to improve the noisy speech recognition. Then, the effect of bandwidth limiting and channel distortion is studied. It has been found that bandwidth limiting and amplitude distortion lower the recognition rate significantly, but phase distortion affects little. To reduce the channel effect, we modify the reference pattern according to some training data. When both channel noise and distortion exist, the recognition rate without the proposed method is merely 7.7~26.4%, but the recognition rate with the proposed method is drastically increased to 76.2~92.3%.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.543-554
• /
• 1995

This paper describes the improvement of driving stability and the control system for INMEL-VII which is motorized manual wheelchair to satisfy requirements of the disabled The INMEL-VI was based on high maneuverability of the omnidirection drive and safety But the results of field tests about two years showed some problems to the disabled in daily life such as driving stability, Pm switching noise, and rotation of motor without driving command on negative slope. To solve the problems due to an increased DC motor power and applied to direct connection method in INMEL- VII. It improved the driving circuits and set switching frequency to 5KHz to eliminate the switching noise caused by PWM control of DC motor, As compare with the INMEL-VI, INMEL-VII is improved in driving stability by transfer the weight center to forward. The results of field testing proved the improvement of the driving stability and software algorithm It has been estimated to have a hlgh practical use for powered walking aids to the disabled's daily life.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.58.1-58.1
• /
• 2010

Stainless Steel의 유연한 기판을 사용하여 ZnO:Al/Ag의 후면전극에서 Ag 증착 실험조건 변화를 통해서 light trapping을 개선한 n-i-p 구조의 플렉서블 미세결정질 실리콘 박막 태양전지를 제작하였다. 실험 방법으로 마그네트론 스퍼터를 사용하여 Stainless Steel 기판 위에 ZnO:Al/Ag를 증착하여 후면전극으로 사용되는 back reflector를 제작하였으며 그 위에 미세결정질 실리콘 박막을 증착하였다. Back reflector에서 Ag 박막의 증착 온도가 증가할수록 표면결정 성장으로 roughness가 증가하여 반사도를 증가하였다. 또한, Ag 박막 증착 두께와 압력 변화에 따른 광학적 특성변화를 Atomic Force Microscope(AFM), Scanning Electron Microscopy(SEM),UV-visible-nIR spectrometry로 조사하여 최적의 조건을 찾았으며 개선된 back reflector의 특성이 n-i-p 구조의 플렉서블 미세결정질 실리콘 박막 태양전지에 적용하여 light trapping의 증가가 태양전지에서 광학적인 특성 변화 및 효율 향상에 영향을 주는지 Photo IV와 EQE(External Quantum Efficiency)를 통하여 조사하였다.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.863-870
• /
• 2004

UMTS(Universal Mobile Telecommunication System) is recently recognized as a standard for 3rd generation of wireless networks and DSCH(Down-link Shared Chanel) is considered as a very effective multiplexing method in UMTS. So, it is inevitable to develope an effective packet scheduling algorithms for DSCH in UMTS. This paper describes an improved packet scheduling algorithm for DSCH of UMTS. The algorithm takes consideration in channel state for each mobile terminal to maximize link utilization, delay threshold for class 3 traffic and throughput for class 4 to get long term fairness. To verify the algorithm, we programmed a simulator using PARSEC simulation tool and got some simulation results by it. The simulation results show that the algorithm has reasonable characteristics in both of link utilization and fair-ness by trade-off.