• Title/Summary/Keyword: 실험체 크기

Search Result 953, Processing Time 0.041 seconds

Bio-mediated Flocculation by Extracellular Polymeric Substances in Cohesive Sediment Suspensions: Experimental Study (생체고분자물질이 부유사 응집에 미치는 영향 연구)

  • Baek, Seung-Ryong;Kim, Jae-In;O, Min-Ji;Lee, Byeong-Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.107-107
    • /
    • 2015
  • 최근 기후변화로 인한 강우강도 증대, 산업화에 따른 토지개발 등으로 인하여 다량의 점착성 부유사(Cohesive Sediments)가 하천, 호소 등 수자원 환경으로 유입되고 있다. 점착성 부유사는 하천, 호소의 난류 조건에 따라 부유하거나 혹은 응집, 침전하여 하상 저니층을 형성한다. 부유사, 미생물 및 각종 유기입자가 포함된 하상 저니층은 검은색으로 외관상 보기 좋지 않을 뿐 아니라, 혐기성상태에서 부패하여 수생태계의 건강성을 해치게 된다. 또한 미세 부유사 및 미생물 입자는 각종 중금속, 유기오염물질을 흡착하고, 조건에 따라 재용출할 수 있는 저장매체로 작용하기 때문에 수자원환경에 미치는 영향이 아주 크다. 특히, 수중 미생물(조류) 작용에 의해 생성되는 EPS (Extracellular Polymeric Substances)는 부유사 및 미생물 입자들을 서로 엉겨 붙게 하여, 부유사-미생물 혼합 응집체 및 저니층 형성을 가속화하게 된다. 본 연구에서는 EPS가 부유사 응집에 미치는 영향을 파악하기 위하여, Xanthan Gum (Sigma-Aldrich, USA)을 EPS의 지표 물질로 사용하고, Kaolinite(Sigma-Aldrich, USA)를 수자원환경에 존재하는 대표적인 부유사로 사용하여 응집실험(Jar Test)을 수행하였다. 이온농도가 응집에 미치는 영향을 파악하기 위하여 수체 이온농도를 0.0001M NaCl, 0.001M NaCl, 0.01M NaCl, 그리고 0.001M NaCl + 0.1mg/L $Ca^{2+}$, 0.001M NaCl + 0.5mg/L $Ca^{2+}$, 0.001M NaCl + 1.0 mg/L $Ca^{2+}$으로 보정하여 응집실험을 수행하였다. 250 rpm 급속 교반 1븐, 50 rpm 완속교반 5시간, 침잔 1시간 후 응집체를 채취하여 응집체 이미지 분석을 통해 응집체 크기 및 형상을 측정하였고, 수표면 2 cm 지점에서 상등액을 채수하여 잔류 고형물 농도 분석을 실시하였다. 응집실험을 통하여 다음과 같은 결과를 도출하였다.. 낮은 이온농도의 경우, EPS가 큰 고분자 구조체에 부유 입자들이 엮어 응집되는 Sweeping Flocculation의 특징을 나타내었다. 하지만, 이온농도가 높아질수록 경우, EPS 고분자 구조체 내부 반발력이 감소하여 크기가 축소되고, 이에 따라 부유 입자 표면에 패치 형태로 흡착되었다. EPS가 패치형태로 입자에 흡착한 경우, 응집제 농도 증가에 따라 응집능 최적점이 형성되고, 이후 표면하전 역전이나 Steric Stabilization에 의해 응집능이 저감되는 형태를 나타낸다. 따라서,수중이온농도가 EPS의 사슬형 고분자 응집제의 크기, 형태(Morphology)를 결정하고, 더 나아가 응집능을 결정하는 중요한 인자로 나타났다. 따라서, 후속 연구를 통하여 생체고분자물질의 크기 및 형태 변화, 이에 따른 응집능변화를 면밀히 연구하고자 한다.

  • PDF

Experimental Investigation of The Lateral Retrofitting Effect of FRP Sheet and Buckling-restrained Braces for Beam-Column Joints (FRP Sheet와 비좌굴 가새를 적용한 보-기둥 접합부의 횡방향 보강효과에 관한 실험적 연구)

  • Byon, Eun-Hyuk;Kim, Min-Sook;Lee, Young-Hak;Kim, Hee-Cheul
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.15 no.1
    • /
    • pp.49-56
    • /
    • 2011
  • The strengthening effect of CFRP sheet and AFRP sheet with buckling-restrained brace for Beam-Column joints under constant axial and cyclic lateral loading is evaluated experimentally in this paper. Six test specimens were constructed. The main test parameters included the FRP Sheet and Buckling-restrained braces. The results of the tests were analyzed by focusing on their mode of failure, maximum load, ductility indexes, and energy dissipation capacity. Test results indicated that CFRP Sheet with the buckling-restrained brace system significantly increased the strength and stiffness of the specimen and that it was the most adequate retrofitting method.

Lateral Resisting Capacity for CFT Column to RC Flat Plate Slab Exterior Connections (CFT 기둥-RC 무량판 슬래브 외부접합부의 횡저항 성능)

  • Song, Ho-Beom;Song, Jin-Kyu;Oh, Sang-Won;Kim, Byung-Jo
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.11a
    • /
    • pp.61-64
    • /
    • 2008
  • A combination of CFT column and RC flat plate without formworks is very effectively rapid constructions. This paper verified the lateral resisting capacity of CFT column-RC flat plate exterior connection in comparison with general RC column-flat plate connection and detected moment capacity and ductility capacity of connection according to moment-displacement ratio. We made and tested specimens which have different variables respectively and as a result derive a following conclusion. In CFT-E2 specimen a critical section was extended and maximum moment increased 20% respectively in comparison to general RC column specimen. In BME and CFT-E1 specimens generally shear governed behaviors and CFT-E2 specimen complemented with seismic band, flexure behavior region of slab was extended and also ductility ratio and energy absorptance increased.

  • PDF

Shear Performance of Full-scale Reinforced Concrete Beams with Recycled Fine Aggregates (순환잔골재의 치환율에 따른 철근콘크리트 보의 전단성능)

  • Ji, Sang-Kyu;Song, Seon-Hwa;Yun, Hyun-Do;Choi, Ki-Sun;You, Young-Chan;Kim, Keung-Hwan
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.04a
    • /
    • pp.205-208
    • /
    • 2008
  • Using the recycled aggregate can reduces the landfill space, the demand for natural raw material for new construction. Some investigations have been carried out to study the shear behaviors of RC beams with recycled aggregates. But these have some limitation due to the use of low quality recycled aggregates and small-scale specimens in the laboratory. In this study, four full-scaled RC beams were tested to evaluate the effects of replacement level (0,30, 60, and 100%) of recycled fine aggregate on shear behavior of RC beams. The results showed that the beams with recycled fine aggregates show similar crack pattern and failure mode compared with the beam with natural aggregate. Also, the beams with recycled fine aggregates present the similar shear strength except the one with the replacement level of 100% recycled fine aggregates. Shear strength were compared with the provisions in current code (KCI2007) and the equation proposed by Zsutty. The KCI equations were conservative and subsequently can be used for the shear design of recycled aggregate concrete beam.

  • PDF

방전플라즈마 소결법으로 제조한 Mo-Cu 합금 소결체의 물성 및 전기적 특성에 관한 연구

  • Lee, Han-Chan;Mun, Gyeong-Il;Lee, Bung-Ju;Sin, Baek-Gyun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.277-277
    • /
    • 2011
  • Mo-Cu 합금은 고강도이고 우수한 열전도성 및 전기전도성를 가지는 특성이 있어 현재 방열소재, 반도체 부품, 자동차 부품 등 여러 응용분야에서 연구가 활발히 진행되고 있다. 본 연구에서는 서로 고용성이 없는 Mo-Cu 합금을 제조하기 위해서 Mo, Cu 분말을 PBM (Planetary Ball Milling) 방법을 이용하여 제조 하였으며, 제조된 분말은 SPS (Spark Plasma Sintering) 공정을 이용하여 소결체를 제조하였다. Mo-Cu의 조성 변화는 Cu의 함유량을 각각 5at%Cu, 10at%Cu, 20at%Cu로 조절하여 수행하였으며, PBM 의 공정 변수로 회전수(RPM), 볼과 분말의 비율, 분산제의 양, 볼밀 시간, 분위기 변화를 주어 최적조건을 얻기 위한 실험을 진행하였다. PBM 방법을 이용하여 제조한 분말은 PSA (Particle Size Analysis)에 의해 분말의 크기를 측정하고 EDS(Energy Disperse X-ray Spectrometer) 분석에 의해 조성을 확인하였으며, XRD (X-Ray Diffraction) 분석에 의해 Cu peak이 사라지는 조건을 PBM의 최적조건으로 잡고 실험을 진행하였다. 소결체를 고밀도화하기 위해 소결공정을 SPS 방식으로 하였으며 소결체의 경도, 내마모성, 마찰계수 일함수 등을 분석하기 위해 소결체의 크기를 직경 30 mm 및 두께 5 mm로 설계하였고, 소결 공정 변수로 소결온도를 각각 $900^{\circ}C$, $1000^{\circ}C$, $1100^{\circ}C$, 소결압력을 50MPa, 60MPa, 70MPa, 유지시간을 0분, 10분, 20분으로 차이를 주어, 소결체의 밀도차이와 물성차이를 분석하였다. 그 결과 PBM의 최적조건으로는 5at%Cu 에서는 10h, 10at%Cu, 20at%Cu 에서는 20h의 최적의 밀링 시간을 확인하였고, 다른 공정 변수의 최적조건으로는 회전수 300RPM, 10:1의 볼과 분말 비, 분산제 4wt%, Ar 분위기라는 조건을 얻을 수 있었다. 각각의 공정변수 변화에 따른 소결체 최적밀도 달성조건, 소결체 물성 및 전기적 특성 등의 상관관계에 관하여 보고한다.

  • PDF

An Experimental Study on Fire Resistance Performance of Normal Strength Reinforce Concrete Column (일반강도 철근콘크리트 기둥의 내화성능에 관한 실험적 연구)

  • Cho, Kyung-Suk;Yeo, In-Hwan;Cho, Bum-Yeon;Park, Kyung-Hoon;Min, Byung-Ryeol
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2010.10a
    • /
    • pp.297-301
    • /
    • 2010
  • 일반콘크리트 기둥을 대상으로 콘크리트 피복두께와 단면크기를 변수로 하여 내화성능을 평가하였다. 피복두께가 늘어남에 따라 내화성능시간도 다소 늘어 피복두께와 내화성능은 비례적 관계에 있는 것으로 나타났다. 단면크기가 커짐에 따라 실험체의 열용량이 증가하여 내화성능이 좋아질 것으로 예상하였으나 폭렬의 영향으로 인하여 단면크기에 따른 내화성능의 변화는 큰 의미가 없는 것으로 나타났다. 따라서 콘크리트 기둥의 내화성능은 폭렬 여부에 의해 크게 지배되는 것으로 판단된다.

  • PDF

Experimental Method for Evaluating Debonding Strength of FRPs Used for Retrofitting Concrete Structures (콘크리트 휨부재 보강용 FRP의 부착성능 평가를 위한 실험방법 연구)

  • Utui, Nadia;Kim, Hee-Sun
    • Journal of the Korean Society for Advanced Composite Structures
    • /
    • v.2 no.3
    • /
    • pp.36-41
    • /
    • 2011
  • This study proposes a experimental method to evaluate bonding strength of FRPs used for retrofitting concrete structures. Specimens are designed so that debonding failure of FRPs can be induced from reinforced concrete beams retrofitted with two layers of carbon and glass FRPs. And three-point loading tests are performed to see if debonding failure with proper debonding strength is observed from the specimens. The test results show that the tested beams are failed due to debonding of FRPs, therefore, the proposed test method is capable of evaluating debonding strength of FRPs using relatively small normal strength concrete beams.

Pseudo-Dynamic Test for the Bridges Retrofitted with Laminated Rubber Bearings (적층고무받침으로 내진보강된 교량의 유사동적실험)

  • Kwak, Im-Jong;Cho, Chang-Beck;Han, Kyoung-Bong;Kim, Young-Jin;Kwak, Jong-Won
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.9 no.1 s.41
    • /
    • pp.43-50
    • /
    • 2005
  • Many highway bridges in Korea need seismic retrofit because only one decade has passed since the seismic design criteria was introduced. For the highway bridges of which bearings are worn and dysfunctional, the validity of seismic retrofit method using laminated rubber bearings was discussed in this study. Real scale RC pier specimens without seismic details were constructed. And then, Pot bearing, Rubber bearing (RB), Lead-rubber bearing (LRB) were applied to these specimens. Through pseudo dynamic test method, dynamic behavior of these RC piers under earthquake was simulated and compared. From the test results, proposed seismic retrofit method was found to be valid.

The effect of Meungzo and Saemmul fonts on Hangul recognition (명조체와 샘물체 단어모양이 한글인식에 미치는 효과)

  • Kim, Ho-Young;Cheong, Chan-Sup
    • Annual Conference on Human and Language Technology
    • /
    • 1992.10a
    • /
    • pp.259-267
    • /
    • 1992
  • 단어모양이 한글 시각정보처리에 미치는 효과를 알아보기 위해 명조체와 샘물체로 된 한음절 글자, 두음절 단어, 세음절 단어의 정확인식율을 비교하였다. 명조체는 자모의 모양과 크기가 글자의 고정된 사각틀에 맞게 변형되므로 단어모양이 글자의 자모조합 유형과 음절길이에 따라 크게 달라지지 않는다. 이에 반해 샘물체는 자모조합 유형에 따라 글자의 사각틀이 변형되므로 부가적인 단어변별 정보가 단어모양에 포함되며, 음절길이가 증가할 때 단어모양 정보가 명조체에 비해 더욱 두드러진다. 이처럼 서로 구별될 수 있는 명조체와 샘물체 단어의 시각적 구조는 각각 다른 근거에서 한글인식에 영향을 미칠 수 있을 것으로 예상된다. 연구결과, 명조체의 정확인식율이 샘물체보다 높았으며, 음절길이가 증가할 때 명조체와 샘물체에 상관없이 정확인식율이 향상되었다. 본 실험의 결과는 단어의 외곽모양 변이가 영어의 경우보다 한글 시각정보처리에서 상대적으로 덜 중요하다는 것을 시사한다.

  • PDF

An Experimental Study on Determination of Dry Density of Sand Mixed with Gravels (자갈 섞인 모래의 건조밀도 계산에 관한 실험 연구)

  • Park, Sung-Sik;Choi, Sun-Gyu
    • Journal of the Korean Geotechnical Society
    • /
    • v.29 no.7
    • /
    • pp.37-46
    • /
    • 2013
  • Various sizes of gravels are included in the most field soils that are utilized for civil constructions. Especially, the small amounts of gravel are often included in selected soils for backfill materials, earth dams, and subbase ground. In such cases, the small amounts of mixed gravel and its shape may influence the determination of dry density of soils, which results in an inaccurate degree of compaction for soils in the field. In this study, a dry density of sand with various gravel contents (0, 10, 17, 23, 29 and 33%) and three different sizes (2.0-2.36, 3.35-4.75, 5.6-10.0 mm) was experimentally investigated for compacted or loosely packed conditions. The loosely packed sand with gravels was simulated by pouring sand into compaction mould and its density was determined. When a 33% of gravel content was mixed with sand, its dry density increased up to 15-20% for compacted specimen and 20-23% for loosely packed specimen. When a gravel content and size were the same, a dry density of compacted specimen was $0.1-0.16g/cm^3$ higher than that of loosely packed specimen. Even though the same gravel content was used, a dry density of sand with big gravels was $0.04-0.08g/cm^3$ higher than that of sand with small gravels for compacted specimen and $0.03-0.05g/cm^3$ for loosely packed specimen.